Retraining Report
Find training

CNC machinist training in California

33 CNC machinist programs with costs, results and funding that can make them free

20 schools offer these machinist programs, and California has approved every one for workforce funding. Each shows its price if you pay yourself and how past students did.

Machinists set up and run equipment, including computer-controlled (CNC) machines, to make precision metal parts and tools. Community colleges and technical schools offer certificates and two-year degrees that teach reading engineering drawings and programming CNC machines.1 In California, 19 of the 33 programs take students without a high school diploma, and 3 are taught partly or fully online.

See the 33 programs

How much does CNC machinist training cost in California?

$1,288 to $4,755 is what most CNC machinist programs in California cost if you pay yourself

That is the middle half of the 25 programs with a price. All of them: $250 to $12,500

In the typical program

Finished the program
93%
Working 6 months later
61%
Earned a year, estimated
about $44,200
Length
17 to 36 weeks

Source: US Department of Labor, program year 2024 (July 2024 to June 2025). Only programs approved for workforce funding are listed; other schools in California may also offer CNC machinist training. How these figures are made

Is there free CNC machinist training in California?

Who qualifies, and other ways to pay: paid apprenticeships, financial aid and the GI Bill

CNC machinist training in Los Angeles, San Diego, Riverside and other California cities

Areas with 10 or more programs have a page of their own. Choosing another area filters the list below. 4 more programs are in 4 other areas.

All 33 CNC machinist programs in California approved for WIOA funding

Filters
What you need to enroll
Kind of program
How it's taught
How to show the list

33 programs

  • Machinist certificate or diplomaHybridNo diploma needed

    CNC Machinist

    De Anza College, Occupational Training Institute

    Cupertino

    No diploma needed

    De Anza College, Occupational Training Institute, Cupertino · Machinist certificate or diploma · Hybrid · No diploma needed

    Earned a year, estimated$98,600
    Price if you pay yourself$1,083
    Program website, CNC Machinist at De Anza College, Occupational Training Institute
    More details about CNC Machinist at De Anza College, Occupational Training Institute
    Finished
    100%
    Working at 6 months
    21%
    Earned in a quarter
    $24,661
    Length
    36 weeks, 50 hours a week
    Cost of supplies
    $2,620
    Students counted
    1,911
    a year, estimated
    $98,600
    price
    $1,083

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Machinist Training

    NTMA Machinist Career College

    Santa Fe Springs

    High school diploma or equivalent

    NTMA Machinist Career College, Santa Fe Springs · Machinist certificate or diploma · In person · High school diploma or equivalent

    Earned a year, estimated$38,400
    Price if you pay yourself$12,500

    67 students trained with WIOA funding

    Program website, Machinist Training at NTMA Machinist Career College
    More details about Machinist Training at NTMA Machinist Career College
    Finished
    83%
    Working at 6 months
    73%
    Earned in a quarter
    $9,600
    Length
    36 weeks, 25 hours a week
    Cost of supplies
    $4,295
    Students counted
    536
    a year, estimated
    $38,400
    price
    $12,500
    trained with WIOA funding
    67

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Machinist

    North Valley Occupational Center - LAUSD

    Mission Hills

    High school diploma or equivalent

    North Valley Occupational Center - LAUSD, Mission Hills · Machinist certificate or diploma · In person · High school diploma or equivalent

    Earned a year, estimated$49,000
    Price if you pay yourself$1,890
    Program website, Machinist at North Valley Occupational Center - LAUSD
    More details about Machinist at North Valley Occupational Center - LAUSD
    Finished
    56%
    Working at 6 months
    33%
    Earned in a quarter
    $12,251
    Length
    27 weeks, 20 hours a week
    Cost of supplies
    $2,335
    Students counted
    284
    a year, estimated
    $49,000
    price
    $1,890

  • CNC programmingIn personHigh school diploma or equivalent

    Mastercam

    NTMA Machinist Career College

    Santa Fe Springs

    High school diploma or equivalent

    NTMA Machinist Career College, Santa Fe Springs · CNC programming · In person · High school diploma or equivalent

    Earned a year, estimated$47,800
    Price if you pay yourself$4,375

    14 students trained with WIOA funding

    Program website, Mastercam at NTMA Machinist Career College
    More details about Mastercam at NTMA Machinist Career College
    Finished
    91%
    Working at 6 months
    90%
    Earned in a quarter
    $11,960
    Length
    18 weeks, 8 hours a week
    Cost of supplies
    $820
    Students counted
    236
    a year, estimated
    $47,800
    price
    $4,375
    trained with WIOA funding
    14

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    CNC Machining

    NTMA Machinist Career College

    Santa Fe Springs

    High school diploma or equivalent

    NTMA Machinist Career College, Santa Fe Springs · Machinist certificate or diploma · In person · High school diploma or equivalent

    Earned a year, estimated$44,200
    Price if you pay yourself$4,375

    12 students trained with WIOA funding

    Program website, CNC Machining at NTMA Machinist Career College
    More details about CNC Machining at NTMA Machinist Career College
    Finished
    91%
    Working at 6 months
    86%
    Earned in a quarter
    $11,047
    Length
    18 weeks, 8 hours a week
    Cost of supplies
    $820
    Students counted
    174
    a year, estimated
    $44,200
    price
    $4,375
    trained with WIOA funding
    12

  • Machinist certificate or diplomaIn personNo diploma needed

    Machinist

    El Monte Rosemead Adult School

    El Monte

    No diploma needed

    El Monte Rosemead Adult School, El Monte · Machinist certificate or diploma · In person · No diploma needed

    Earned a year, estimated$10,300
    Price if you pay yourselfNot reported
    School website, Machinist at El Monte Rosemead Adult School
    More details about Machinist at El Monte Rosemead Adult School
    Finished
    25%
    Working at 6 months
    49%
    Earned in a quarter
    $2,575
    Length
    18 weeks, 23 hours a week
    Cost of supplies
    Not reported
    Students counted
    130
    a year, estimated
    $10,300
    price
    Not reported

  • Machinist certificate or diplomaIn personNo diploma needed

    Manufacturing - Machinist

    Reedley Community College

    Reedley

    No diploma needed

    Reedley Community College, Reedley · Machinist certificate or diploma · In person · No diploma needed

    Earned a year, estimated$36,800
    Price if you pay yourself$1,250

    3 students trained with WIOA funding

    Program website, Manufacturing - Machinist at Reedley Community College
    More details about Manufacturing - Machinist at Reedley Community College
    Finished
    100%
    Working at 6 months
    92%
    Earned in a quarter
    $9,210
    Length
    36 weeks, 25 hours a week
    Cost of supplies
    $1,600
    Students counted
    88
    a year, estimated
    $36,800
    price
    $1,250
    trained with WIOA funding
    3

  • CNC programmingIn personHigh school diploma or equivalent

    Computer Numerical Control (CNC) Operator/Programmer

    MiraCosta Community College

    Oceanside

    High school diploma or equivalent

    MiraCosta Community College, Oceanside · CNC programming · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,710
    Program website, Computer Numerical Control (CNC) Operator/Programmer at MiraCosta Community College
    More details about Computer Numerical Control (CNC) Operator/Programmer at MiraCosta Community College
    Finished
    100%
    Working at 6 months
    61%
    Earned in a quarter
    Not reported
    Length
    14 weeks, 8 hours a week
    Cost of supplies
    None listed
    Students counted
    80
    a year, estimated
    Not reported
    price
    $2,710

  • CNC or machine operatorIn personHigh school diploma or equivalent

    Machinist Operator I

    MiraCosta Community College

    Oceanside

    High school diploma or equivalent

    MiraCosta Community College, Oceanside · CNC or machine operator · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$6,500

    4 students trained with WIOA funding

    Program website, Machinist Operator I at MiraCosta Community College
    More details about Machinist Operator I at MiraCosta Community College
    Finished
    97%
    Working at 6 months
    38%
    Earned in a quarter
    Not reported
    Length
    21 weeks, 23 hours a week
    Cost of supplies
    None listed
    Students counted
    80
    a year, estimated
    Not reported
    price
    $6,500
    trained with WIOA funding
    4

  • CNC programmingIn personHigh school diploma or equivalent

    CNC Programming for the CNC Mill Using G and M Codes

    Glendale Community College

    Glendale

    High school diploma or equivalent

    Glendale Community College, Glendale · CNC programming · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$3,200
    Program website, CNC Programming for the CNC Mill Using G and M Codes at Glendale Community College
    More details about CNC Programming for the CNC Mill Using G and M Codes at Glendale Community College
    Finished
    96%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    20 weeks, 4 hours a week
    Cost of supplies
    $250
    Students counted
    78
    a year, estimated
    Not reported
    price
    $3,200

  • CNC programmingIn personHigh school diploma or equivalent

    Advanced Mastercam

    NTMA Machinist Career College

    Santa Fe Springs

    High school diploma or equivalent

    NTMA Machinist Career College, Santa Fe Springs · CNC programming · In person · High school diploma or equivalent

    Earned a year, estimated$52,000
    Price if you pay yourself$4,375
    Program website, Advanced Mastercam at NTMA Machinist Career College
    More details about Advanced Mastercam at NTMA Machinist Career College
    Finished
    93%
    Working at 6 months
    47%
    Earned in a quarter
    $12,989
    Length
    18 weeks, 8 hours a week
    Cost of supplies
    $820
    Students counted
    71
    a year, estimated
    $52,000
    price
    $4,375

  • Machinist certificate or diplomaIn personNo diploma needed

    Uniquely-Abled Academy (UAA-For High Functioning Autism Population) Entry Level

    College of the Canyons

    Santa Clarita

    No diploma needed

    College of the Canyons, Santa Clarita · Machinist certificate or diploma · In person · No diploma needed

    Earned a year, estimated$39,100
    Price if you pay yourself$10,870

    19 students trained with WIOA funding

    Program website, Uniquely-Abled Academy (UAA-For High Functioning Autism Population) Entry Level at College of the Canyons
    More details about Uniquely-Abled Academy (UAA-For High Functioning Autism Population) Entry Level at College of the Canyons
    Finished
    100%
    Working at 6 months
    78%
    Earned in a quarter
    $9,787
    Length
    12 weeks, 31 hours a week
    Cost of supplies
    $630
    Students counted
    31
    a year, estimated
    $39,100
    price
    $10,870
    trained with WIOA funding
    19

  • Machinist apprenticeshipIn personNo diploma needed

    Rise Up Industries Reentry Apprenticeship Program - CNC Operator

    Rise Up Industries

    San Diego

    No diploma needed

    Rise Up Industries, San Diego · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported

    8 students trained with WIOA funding

    More details about Rise Up Industries Reentry Apprenticeship Program - CNC Operator at Rise Up Industries
    Finished
    50%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    78 weeks, 40 hours a week
    Cost of supplies
    Not reported
    Students counted
    10
    a year, estimated
    Not reported
    price
    Not reported
    trained with WIOA funding
    8

  • CNC or machine operatorIn personHigh school diploma or equivalent

    Computer Numerical Control (CNC) Operator

    Norco College CTE

    Norco

    High school diploma or equivalent

    Norco College CTE, Norco · CNC or machine operator · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,382
    Program website, Computer Numerical Control (CNC) Operator at Norco College CTE
    More details about Computer Numerical Control (CNC) Operator at Norco College CTE
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    48 weeks, 15 hours a week
    Cost of supplies
    $501
    Students counted
    16
    a year, estimated
    Not reported
    price
    $1,382

  • CNC or machine operatorIn personNo diploma needed

    Basic Machine Tool Operations-Lathe, Mill-BC

    Kern Community College District

    Bakersfield

    No diploma needed

    Kern Community College District, Bakersfield · CNC or machine operator · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$250
    Program website, Basic Machine Tool Operations-Lathe, Mill-BC at Kern Community College District
    More details about Basic Machine Tool Operations-Lathe, Mill-BC at Kern Community College District
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 6 hours a week
    Cost of supplies
    $150
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $250

  • Short course or single classIn personNo diploma needed

    Introduction to General Machining & Milling

    Visalia Adult School

    Visalia

    No diploma needed

    Visalia Adult School, Visalia · Short course or single class · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$425
    More details about Introduction to General Machining & Milling at Visalia Adult School
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    17 weeks, 12 hours a week
    Cost of supplies
    $120
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $425

  • CNC or machine operatorIn personHigh school diploma or equivalent

    Conventional Machine Operator/Basic Machine Operator

    Norco College CTE

    Norco

    High school diploma or equivalent

    Norco College CTE, Norco · CNC or machine operator · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$598
    Program website, Conventional Machine Operator/Basic Machine Operator at Norco College CTE
    More details about Conventional Machine Operator/Basic Machine Operator at Norco College CTE
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    20 weeks, 8 hours a week
    Cost of supplies
    $388
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $598

  • CNC programmingIn personNo diploma needed

    Computer Numerical Control Programming- BC

    Kern Community College District

    Bakersfield

    No diploma needed

    Kern Community College District, Bakersfield · CNC programming · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$600
    School website, Computer Numerical Control Programming- BC at Kern Community College District
    More details about Computer Numerical Control Programming- BC at Kern Community College District
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    32 weeks, 6 hours a week
    Cost of supplies
    $300
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $600

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Machinist Certificate of Achievement

    Madera Community College

    Madera

    High school diploma or equivalent

    Madera Community College, Madera · Machinist certificate or diploma · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,288
    More details about Machinist Certificate of Achievement at Madera Community College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    54 weeks, 50 hours a week
    Cost of supplies
    $500
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $1,288

  • Machinist certificate or diplomaIn personNo diploma needed

    Machine Tool Technology Certificate of Achievement

    Napa Valley College

    Napa

    No diploma needed

    Napa Valley College, Napa · Machinist certificate or diploma · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,200
    School website, Machine Tool Technology Certificate of Achievement at Napa Valley College
    More details about Machine Tool Technology Certificate of Achievement at Napa Valley College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    18 weeks, 12 hours a week
    Cost of supplies
    $98
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $2,200

  • CNC programmingIn personHigh school diploma or equivalent

    Computer Numerical Control (CNC) Programming

    Norco College CTE

    Norco

    High school diploma or equivalent

    Norco College CTE, Norco · CNC programming · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,530
    Program website, Computer Numerical Control (CNC) Programming at Norco College CTE
    More details about Computer Numerical Control (CNC) Programming at Norco College CTE
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 14 hours a week
    Cost of supplies
    $546
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $2,530

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Advanced CNC Machining

    NTMA Machinist Career College

    Santa Fe Springs

    High school diploma or equivalent

    NTMA Machinist Career College, Santa Fe Springs · Machinist certificate or diploma · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$4,375
    Program website, Advanced CNC Machining at NTMA Machinist Career College
    More details about Advanced CNC Machining at NTMA Machinist Career College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    18 weeks, 8 hours a week
    Cost of supplies
    $820
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $4,375

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    CNC Machinist

    Q.P.E. Technical Institute

    Anaheim

    High school diploma or equivalent

    Q.P.E. Technical Institute, Anaheim · Machinist certificate or diploma · In person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$4,695
    Program website, CNC Machinist at Q.P.E. Technical Institute
    More details about CNC Machinist at Q.P.E. Technical Institute
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 33 hours a week
    Cost of supplies
    $450
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $4,695

  • CNC or machine operatorIn personNo diploma needed

    CNC Operator - Milling and Turning- Technician

    El Camino College

    Torrance

    No diploma needed

    El Camino College, Torrance · CNC or machine operator · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$4,755
    Program website, CNC Operator - Milling and Turning- Technician at El Camino College
    More details about CNC Operator - Milling and Turning- Technician at El Camino College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $245
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $4,755

  • Machinist certificate or diplomaHybridNo diploma needed

    Machinist CNC

    San Antonio ROP

    Pomona

    No diploma needed

    San Antonio ROP, Pomona · Machinist certificate or diploma · Hybrid · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$7,000
    School website, Machinist CNC at San Antonio ROP
    More details about Machinist CNC at San Antonio ROP
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    27 weeks, 30 hours a week
    Cost of supplies
    $908
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $7,000

  • Machinist certificate or diplomaHybridNo diploma needed

    Entry Level Milling & Tooling Machinist - NIMS Certified

    College of the Canyons

    Santa Clarita

    No diploma needed

    College of the Canyons, Santa Clarita · Machinist certificate or diploma · Hybrid · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$7,500
    School website, Entry Level Milling & Tooling Machinist - NIMS Certified at College of the Canyons
    More details about Entry Level Milling & Tooling Machinist - NIMS Certified at College of the Canyons
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 25 hours a week
    Cost of supplies
    $1,745
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $7,500

  • Machinist certificate or diplomaIn personNo diploma needed

    Entry Level CNC (Computer Numerical Control)-NIMS Certified

    College of the Canyons

    Santa Clarita

    No diploma needed

    College of the Canyons, Santa Clarita · Machinist certificate or diploma · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$7,750
    Program website, Entry Level CNC (Computer Numerical Control)-NIMS Certified at College of the Canyons
    More details about Entry Level CNC (Computer Numerical Control)-NIMS Certified at College of the Canyons
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    8 weeks, 40 hours a week
    Cost of supplies
    $1,050
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    $7,750

  • Machinist apprenticeshipIn personNo diploma needed

    00036 - Northern CA Automotive & Machinist JAT

    00036 - Northern CA Automotive & Machinist JAT

    Sacramento

    No diploma needed

    00036 - Northern CA Automotive & Machinist JAT, Sacramento · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about 00036 - Northern CA Automotive & Machinist JAT at 00036 - Northern CA Automotive & Machinist JAT
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    Not reported
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    Not reported

  • Machinist apprenticeshipIn personNo diploma needed

    CA Tooling & Machining Apprenticeship Association

    CA Tooling & Machining Apprenticeship Association

    Petaluma

    No diploma needed

    CA Tooling & Machining Apprenticeship Association, Petaluma · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about CA Tooling & Machining Apprenticeship Association at CA Tooling & Machining Apprenticeship Association
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    Not reported
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    Not reported

  • Machinist apprenticeshipIn personNo diploma needed

    CNC Machine Operator

    Strong Workforce Apprenticeship Group (SWAG)

    Valencia

    No diploma needed

    Strong Workforce Apprenticeship Group (SWAG), Valencia · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about CNC Machine Operator at Strong Workforce Apprenticeship Group (SWAG)
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    99 weeks, 40 hours a week
    Cost of supplies
    Not reported
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    Not reported

  • Machinist apprenticeshipIn personNo diploma needed

    Machine Operator

    Strong Workforce Apprenticeship Group (SWAG)

    Valencia

    No diploma needed

    Strong Workforce Apprenticeship Group (SWAG), Valencia · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about Machine Operator at Strong Workforce Apprenticeship Group (SWAG)
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    99 weeks, 40 hours a week
    Cost of supplies
    Not reported
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    Not reported

  • Machinist apprenticeshipIn personNo diploma needed

    Machinist

    Strong Workforce Apprenticeship Group (SWAG)

    Valencia

    No diploma needed

    Strong Workforce Apprenticeship Group (SWAG), Valencia · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about Machinist at Strong Workforce Apprenticeship Group (SWAG)
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    99 weeks, 40 hours a week
    Cost of supplies
    Not reported
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    Not reported

  • Machinist apprenticeshipIn personNo diploma needed

    Numerical Tool Programmer

    Strong Workforce Apprenticeship Group (SWAG)

    Valencia

    No diploma needed

    Strong Workforce Apprenticeship Group (SWAG), Valencia · Machinist apprenticeship · In person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about Numerical Tool Programmer at Strong Workforce Apprenticeship Group (SWAG)
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    99 weeks, 40 hours a week
    Cost of supplies
    Not reported
    Students counted
    Not reported
    a year, estimated
    Not reported
    price
    Not reported

How to pay for CNC machinist training in California

WIOA funding can pay for CNC machinist training in California

Every program on this page is approved for WIOA funding: public workforce funding under the Workforce Innovation and Opportunity Act. It can pay for training for eligible adults, people who lost their job and young people.2People on public assistance, with a low income or lacking basic skills come first, and veterans have priority.3Your state or local area may limit how much WIOA pays and for how long. If a program costs more, a Pell Grant, a scholarship or severance pay can cover the rest.4

Ask at an American Job Center

Eligibility rules apply, and services vary from state to state. Your local American Job Center can tell you whether you qualify. The Department of Labor's page links to the center finder, or call 1-877-US-2JOBS (1-877-872-5627).5

Paid machinist apprenticeships

An apprenticeship is a job: you're paid to learn, with a raise as your skills grow, and most include classroom teaching. You apply to the employer or the program sponsor. Ask what you'll pay for the classroom part and what you'll earn on the job.6

Financial aid and grants for CNC machinist training

Most students can get federal student aid for college, career school or trade school. A Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. Ask the school whether its program qualifies.78

GI Bill for CNC machinist training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs.9

The program list does not show which programs accept these. Ask the school.

Does WIOA pay for job training? Who qualifies and how to apply

Quick facts: CNC machinist training in California

programs with a price cost under $1,000
4 of 25
lowest typical price among the states with enough programs to compare
10th of 30
other states where the typical program's graduates earned less
9 of 11
CNC machinist programs here, against the typical state's 8
33 vs 8

State comparisons use the same figures as the CNC machinist training by state table: the middle program of each state, and only states with three or more schools for prices. Source: US Department of Labor, program year 2024 (July 2024 to June 2025).

Machinist apprenticeships in California

A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.1

You apply to the employer or the program sponsor, not through a school.6 The Department of Labor's Apprenticeship Finder lists openings by place and job. This page lists 7 machinist apprenticeships approved for WIOA funding in California, none of them with a price listed. Ask what you'll pay for the classes and what you'll earn on the job.

Show only the 7 machinist apprenticeships

What is an apprenticeship, and can WIOA pay for one?

Where the California machinist program numbers come from

Which California machinist programs are on this list?

These are the machinist programs California approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act), as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). Each state keeps its approved programs on an eligible training provider list (ETPL).10 The list here covers programs approved as of June 30, 2025. Schools that never applied for approval are missing, so this is a part of what California offers.

How California machinist program prices are reported

The price is tuition and required fees for someone paying without workforce funding, as the school reported it. "Trained with WIOA funding" on a program counts the people whose training there WIOA paid toward through a training account in program year 2024; the file never gives counts under 3, so a program without the line may still take WIOA students. It does not say how much of the price WIOA covered. Prices under $100 are treated as not reported, because the file holds many blanks entered as $0. Check the current price with the school.

What the graduate results of these programs measure

The figures at the top of this page are the middle program among those that report results: half did better, half did worse. Results describe students who left each program in recent years: the share who finished, the share working in the second quarter after leaving, and the middle earnings of those working in that quarter. States report earnings for that one quarter because they take them from the wage reports employers file every three months. The yearly figure here is that quarter times four, rounded to the nearest $100: an estimate, and an early one, since it is measured about half a year after training. The quarter as reported is under "More details" on each program. Results are withheld for small programs, and they describe past students, so they are no guarantee.

Why do some machinist programs say "Not reported"?

Where a school or the state left a field empty, or the Department of Labor withheld it, the page says "Not reported". Nothing here is estimated to fill a gap.

Why the kind of school is left off each program

The file also records whether a school is public, private or nonprofit, but those entries are wrong too often to print next to a school's name, so this page leaves them out.

Other training in California

Sources for the facts about CNC machinist training in California

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
  2. US Department of Labor, TrainingProviderResults.gov: About This Site
  3. US Department of Labor: WIOA Adult Program
  4. Code of Federal Regulations, title 20, part 680, sections 680.220 and 680.310: career services before training, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  5. US Department of Labor: American Job Centers
  6. US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List