Retraining ReportJob training public funding can pay for

Find training

Welding classes in Nebraska

28 welding programs with costs, results and funding that can make them free

In Nebraska, 64% of students finished the typical program, against 75% across the US. But graduates of the typical program earned about $41,200 a year (estimated), 21% more than across the US, the 4th-highest of the 32 states with enough programs to compare. The rest is close to the national figures: 71% were working six months later.

The 28 programs are run by 9 schools; the largest runs 6.

Fewer programs here take students without a high school diploma: 9 of 28, against 44% across the US.

By kind, the 28 programs here are general welding (18 programs), welding (associate degree, 6 programs), single welding process (2 programs), pipe welding (1 program), and 1 more of one other kind. The cheapest kind here is general welding, at $3,030 for the middle one of 18 with a price; the most expensive is welding (associate degree), at $8,190.

Fewer of them can be taken online or hybrid than across the US: 1 of 28, against 19% nationwide. They run in 9 cities across Nebraska; Scottsbluff has the most with 6, then Lincoln (5) and Omaha (4). Nearly all (26 of 28) are at schools on the Department of Education's list of accredited institutions.

What a welder does and how you become one: Welding classes across the US

See the 28 programs

How much do welding classes cost in Nebraska?

Certificates and short courses (22 programs)
$1,987 to $4,038most of them, usually 15 to 32 weeks long
Two-year degrees (6 programs)
$7,012 to $8,528most of them, usually 64 weeks long

What you pay yourself for the whole program, as the schools report it. "Most" is the middle half of the programs with a price.

In the typical program

Finished the program
64%
US: 75%
Working 6 months later
71%
US: 71%
Earned a year, estimated
about $41,200
US: about $33,900
Length
16 to 61 weeks
US: 26 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Nebraska. How these figures are made

What welders, cutters, solderers and brazers earn in Nebraska

$52,220 typical pay a year in May 2025; most earn $47,830 to $61,810

Across the US: $53,750 a year.

Jobs now
about 4,200
Change to 2034
+7% US: +2%
Openings a year
about 480

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Nebraska labor market office, openings counting people who leave or change jobs2.

Are there free welding classes in Nebraska?

All 28 welding programs in Nebraska approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

28 programs

How to pay for welding classes in Nebraska

WIOA funding can pay for welding classes in Nebraska

All 28 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for welding classes

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 26 of the 28 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. The school can tell you whether its program qualifies.78

GI Bill for welding classes

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 28 programs the VA approves, so ask the school or the VA.9

Quick facts: Welding classes in Nebraska

programs with a price cost under $2,000
8 of 28
lowest typical price among the states with enough programs to compare
8th of 46
other states where the typical program's graduates earned less
28 of 31
welding programs here, against the typical state's 24
28 vs 24

The same figures as the welding classes by state table; prices only for states with three or more schools.

Do pricier welding programs in Nebraska have better results?

It depends on what you count. The pricier half of welding programs in Nebraska typically costs $4,202, about twice as much as the cheaper half's $1,995: earnings came out higher, the share finishing lower. In the pricier half, 63% finished, against 87%; graduates earned about $38,400 a year, against about $31,800; 71% were working six months later, against 68%.

The pricier programs also run longer, typically 33 weeks against 16, so part of the price pays for more teaching.

Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.

How this is worked out: the 16 certificates and short courses here that report both a price and results, split at the middle price into two halves of 8; degrees are left out. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.

Welding classes in Omaha, Lincoln, Sioux City and other Nebraska cities

Choosing an area filters the program list above. 7 in smaller cities and towns.

Other training in Nebraska

How welding classes compare with the rest of skilled trades: Trade school programs in Nebraska

Where the Nebraska welding program numbers come from

The 28 welding programs here are the ones Nebraska approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 9 schools run them, and 22 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about welding classes in Nebraska

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-4121 Welders, Cutters, Solderers, and Brazers
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Welders, Cutters, Solderers, and Brazers
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List