Welding classes in Maryland
15 welding programs with costs, results and funding that can make them free
Welding school in Maryland costs about what it does elsewhere, a typical $4,510, and takes about 20 weeks. Results lean good: 86% of students finished the typical program, against 75% across the US, and graduates earned an estimated $40,800 a year soon after, the fifth-highest of 32 states. Finding work took longer for some, with 63% working six months later against 71% nationally. Welders in Maryland typically earn $60,310 across all experience levels, above the US figure of $53,750.
The 15 programs are run by 9 schools; the largest runs 5.
More programs here take students without a high school diploma: 9 of 15, against 44% across the US.
By kind, the 15 programs here are single welding process (8 programs) and general welding (7 programs). The cheapest kind here is general welding, at $4,510 for the middle one of 7 with a price; the most expensive is single welding process, at $4,760.
Fewer of them can be taken online or hybrid than across the US: 1 of 15, against 19% nationwide. They run in 8 cities across Maryland; Wye Mills has the most with 5, then Cumberland (3) and Baltimore (2). Nearly all (14 of 15) are at schools on the Department of Education's list of accredited institutions.
What a welder does and how you become one: Welding classes across the US
See the 15 programsHow much do welding classes cost in Maryland?
$3,362 to $5,520 is what most welding programs in Maryland cost if you pay yourself
That is the middle half of the 15 programs with a price. All of them: $1,000 to $14,575
Across the US, most cost $2,440 to $7,689.
In the typical program
- Finished the program
- 86%
- US: 75%
- Working 6 months later
- 63%
- US: 71%
- Earned a year, estimated
- about $40,800
- US: about $33,900
- Length
- 13 to 44 weeks
- US: 26 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Maryland. How these figures are made
What welders, cutters, solderers and brazers earn in Maryland
$60,310 typical pay a year in May 2025; most earn $48,150 to $77,810
Across the US: $53,750 a year.
- Jobs now
- about 2,850
- Change to 2034
- +7% US: +2%
- Openings a year
- about 330
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Maryland labor market office, openings counting people who leave or change jobs2.
All 15 welding programs in Maryland approved for WIOA funding
Filters
15 programs
Combination Welding Technology (864 Clock Hours)
North American Trade School
Baltimore
Accredited school
High school diploma or equivalent
Earned a year, estimated$32,000Price if you pay yourself$14,575Program website, Combination Welding Technology (864 Clock Hours) at North American Trade SchoolMore details about Combination Welding Technology (864 Clock Hours) at North American Trade School
- Finished
- 68%
- Working at 6 months
- 64%
- Earned in a quarter
- $8,008
- Length
- 36 weeks, 24 hours a week
- Cost of supplies
- $1,000
- Students counted
- 233
- Earned a year, estimated
- $32,000
- Price if you pay yourself
- $14,575
Welding Fast Track (350 Clock Hours)
Jane Addams Resource Corporation
Baltimore
No diploma needed
Earned a year, estimated$28,700Price if you pay yourself$9,3345 students trained with WIOA funding
Program website, Welding Fast Track (350 Clock Hours) at Jane Addams Resource CorporationMore details about Welding Fast Track (350 Clock Hours) at Jane Addams Resource Corporation
- Finished
- 75%
- Working at 6 months
- 61%
- Earned in a quarter
- $7,178
- Length
- 14 weeks, 25 hours a week
- Cost of supplies
- None listed
- Students counted
- 75
- Earned a year, estimated
- $28,700
- Price if you pay yourself
- $9,334
- students trained with WIOA funding
- 5
Welding: SMAW, FCAW, GMAW and GTAW (350 Clock Hours)
Wor-Wic Community College
Salisbury
Accredited school
High school diploma or equivalent
Earned a year, estimated$41,300Price if you pay yourself$5,200Program website, Welding: SMAW, FCAW, GMAW and GTAW (350 Clock Hours) at Wor-Wic Community CollegeMore details about Welding: SMAW, FCAW, GMAW and GTAW (350 Clock Hours) at Wor-Wic Community College
- Finished
- 100%
- Working at 6 months
- 52%
- Earned in a quarter
- $10,331
- Length
- 18 weeks, 20 hours a week
- Cost of supplies
- $100
- Students counted
- 65
- Earned a year, estimated
- $41,300
- Price if you pay yourself
- $5,200
Welder/Advanced Welding (120 clock hours)
Carroll Community College
Westminster
Accredited school
No diploma needed
Earned a year, estimated$44,400Price if you pay yourself$1,968Program website, Welder/Advanced Welding (120 clock hours) at Carroll Community CollegeMore details about Welder/Advanced Welding (120 clock hours) at Carroll Community College
- Finished
- 72%
- Working at 6 months
- 78%
- Earned in a quarter
- $11,109
- Length
- 20 weeks, 6 hours a week
- Cost of supplies
- $1,075
- Students counted
- 62
- Earned a year, estimated
- $44,400
- Price if you pay yourself
- $1,968
MIG/TIG Welding Certification (80 clock hours)
Allegany College Of Maryland
Cumberland
Accredited school
High school diploma or equivalent
Earned a year, estimated$37,100Price if you pay yourself$3,1965 students trained with WIOA funding
Program website, MIG/TIG Welding Certification (80 clock hours) at Allegany College Of MarylandMore details about MIG/TIG Welding Certification (80 clock hours) at Allegany College Of Maryland
- Finished
- 100%
- Working at 6 months
- 24%
- Earned in a quarter
- $9,266
- Length
- 10 weeks, 8 hours a week
- Cost of supplies
- None listed
- Students counted
- 59
- Earned a year, estimated
- $37,100
- Price if you pay yourself
- $3,196
- students trained with WIOA funding
- 5
NCCER Welding (200 Clock Hours)
Cecil College
North East
Accredited school
Education and courses
Earned a year, estimated$50,000Price if you pay yourself$5,3455 students trained with WIOA funding
Program website, NCCER Welding (200 Clock Hours) at Cecil CollegeMore details about NCCER Welding (200 Clock Hours) at Cecil College
- Finished
- 83%
- Working at 6 months
- 66%
- Earned in a quarter
- $12,496
- Length
- 25 weeks, 8 hours a week
- Cost of supplies
- $200
- Students counted
- 51
- Earned a year, estimated
- $50,000
- Price if you pay yourself
- $5,345
- students trained with WIOA funding
- 5
Shielded Metal Arc Welding Certification (120 Clock Hours)
Allegany College Of Maryland
Cumberland
Accredited school
High school diploma or equivalent
Earned a year, estimated$30,600Price if you pay yourself$1,6985 students trained with WIOA funding
Program website, Shielded Metal Arc Welding Certification (120 Clock Hours) at Allegany College Of MarylandMore details about Shielded Metal Arc Welding Certification (120 Clock Hours) at Allegany College Of Maryland
- Finished
- 100%
- Working at 6 months
- 38%
- Earned in a quarter
- $7,656
- Length
- 15 weeks, 9 hours a week
- Cost of supplies
- $450
- Students counted
- 42
- Earned a year, estimated
- $30,600
- Price if you pay yourself
- $1,698
- students trained with WIOA funding
- 5
Arc Welding (80 clock hours)
Prince George's Community College
Largo
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$4,760Program website, Arc Welding (80 clock hours) at Prince George's Community CollegeMore details about Arc Welding (80 clock hours) at Prince George's Community College
- Finished
- 40%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 10 weeks, 8 hours a week
- Cost of supplies
- $650
- Students counted
- 39
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,760
Welding/Fabrication MIG & TIG (22 credit hours)
Chesapeake College
Wye Mills
Accredited school
No diploma needed
Earned a year, estimated$45,100Price if you pay yourself$5,694Program website, Welding/Fabrication MIG & TIG (22 credit hours) at Chesapeake CollegeMore details about Welding/Fabrication MIG & TIG (22 credit hours) at Chesapeake College
- Finished
- 9%
- Working at 6 months
- 82%
- Earned in a quarter
- $11,286
- Length
- 52 weeks, 6 hours a week
- Cost of supplies
- $320
- Students counted
- 39
- Earned a year, estimated
- $45,100
- Price if you pay yourself
- $5,694
Maintenance Welding-NIMS (120 clock hours)
Allegany College Of Maryland
Cumberland
Accredited school
High school diploma or equivalent
Earned a year, estimated$40,400Price if you pay yourself$1,000Program website, Maintenance Welding-NIMS (120 clock hours) at Allegany College Of MarylandMore details about Maintenance Welding-NIMS (120 clock hours) at Allegany College Of Maryland
- Finished
- 100%
- Working at 6 months
- 43%
- Earned in a quarter
- $10,088
- Length
- 10 weeks, 12 hours a week
- Cost of supplies
- $532
- Students counted
- 37
- Earned a year, estimated
- $40,400
- Price if you pay yourself
- $1,000
Welding (188 Clock Hours)
Garrett College
McHenry
Accredited school
No diploma needed
Earned a year, estimated$36,500Price if you pay yourself$4,5105 students trained with WIOA funding
Program website, Welding (188 Clock Hours) at Garrett CollegeMore details about Welding (188 Clock Hours) at Garrett College
- Finished
- 89%
- Working at 6 months
- 53%
- Earned in a quarter
- $9,128
- Length
- 30 weeks, 6 hours a week
- Cost of supplies
- None listed
- Students counted
- 33
- Earned a year, estimated
- $36,500
- Price if you pay yourself
- $4,510
- students trained with WIOA funding
- 5
Welding/Fabrication-Stick & Flux-cored (22 credit hours)
Chesapeake College
Wye Mills
Accredited school
No diploma needed
Earned a year, estimated$48,500Price if you pay yourself$5,694Program website, Welding/Fabrication-Stick & Flux-cored (22 credit hours) at Chesapeake CollegeMore details about Welding/Fabrication-Stick & Flux-cored (22 credit hours) at Chesapeake College
- Finished
- Not reported
- Working at 6 months
- 73%
- Earned in a quarter
- $12,124
- Length
- 52 weeks, 2 hours a week
- Cost of supplies
- $320
- Students counted
- 18
- Earned a year, estimated
- $48,500
- Price if you pay yourself
- $5,694
Welding Program-Work Ready (190 Clock Hours)
Chesapeake College
Wye Mills
Accredited school
No diploma needed
Earned a year, estimated$45,300Price if you pay yourself$3,5276 students trained with WIOA funding
Program website, Welding Program-Work Ready (190 Clock Hours) at Chesapeake CollegeMore details about Welding Program-Work Ready (190 Clock Hours) at Chesapeake College
- Finished
- 100%
- Working at 6 months
- 92%
- Earned in a quarter
- $11,332
- Length
- 12 weeks, 31 hours a week
- Cost of supplies
- $325
- Students counted
- 14
- Earned a year, estimated
- $45,300
- Price if you pay yourself
- $3,527
- students trained with WIOA funding
- 6
Welding/Fabrication MIG & TIG (90 clock hours)
Chesapeake College
Wye Mills
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$3,527Program website, Welding/Fabrication MIG & TIG (90 clock hours) at Chesapeake CollegeMore details about Welding/Fabrication MIG & TIG (90 clock hours) at Chesapeake College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 52 weeks, 6 hours a week
- Cost of supplies
- $321
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,527
Welding/Fabrication-Stick & Flux-cored (90 clock hours)
Chesapeake College
Wye Mills
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$3,527Program website, Welding/Fabrication-Stick & Flux-cored (90 clock hours) at Chesapeake CollegeMore details about Welding/Fabrication-Stick & Flux-cored (90 clock hours) at Chesapeake College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 52 weeks, 2 hours a week
- Cost of supplies
- $321
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,527
No programs match these filters.
How to pay for welding classes in Maryland
WIOA funding can pay for welding classes in Maryland
All 15 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Financial aid and grants for welding classes
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 14 of the 15 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. The school can tell you whether its program qualifies.78
GI Bill for welding classes
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 15 programs the VA approves, so ask the school or the VA.9
Quick facts: Welding classes in Maryland
- programs with a price cost under $3,000
- 3 of 15
- lowest typical price among the states with enough programs to compare
- 20th of 46
- other states where the typical program's graduates earned less
- 27 of 31
- welding programs here, against the typical state's 24
- 15 vs 24
The same figures as the welding classes by state table; prices only for states with three or more schools.
Do pricier welding programs in Maryland have better results?
It depends on what you count. The pricier half of welding programs in Maryland typically costs $5,694, about twice as much as the cheaper half's $2,582: the share working six months later and earnings came out higher, the share finishing lower. In the pricier half, 75% finished, against 100%; 65% were working six months later, against 48%; graduates earned about $43,200 a year, against about $38,700.
The pricier programs also run longer, typically 31 weeks against 14, so part of the price pays for more teaching.
Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.
How this is worked out: the 13 welding programs here that report both a price and results, split at the middle price into two halves of 6. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.
Welding classes in Easton, Baltimore, Cumberland and other Maryland cities
Choosing an area filters the program list above. 1 in smaller cities and towns.
Other training in Maryland
How welding classes compare with the rest of skilled trades: Trade school programs in Maryland
- CDL training35 programs
- CNA classes30 programs
- Medical assistant training21 programs
- Phlebotomy training11 programs
- HVAC training8 programs
- Medical billing and coding training24 programs
- LPN programs8 programs
- EMT classes9 programs
- Electrician training3 programs
- Dental assistant programs15 programs
- Auto mechanic classes9 programs
- Pharmacy technician training18 programs
- CNC machinist training6 programs
- Carpentry classes2 programs
- Heavy equipment operator training1 program
- Diesel mechanic training4 programs
- Cybersecurity training74 programs
- IT training78 programs
- Cosmetology school4 programs
- Barber school1 program
- Esthetician school3 programs
- Nail tech school6 programs
- EKG technician programs3 programs
- Massage therapy school2 programs
- Paralegal programs3 programs
- Police academy1 program
- Surgical tech programs5 programs
- Radiology tech programs3 programs
- Culinary school7 programs
- PTA programs3 programs
- Medical administrative assistant training8 programs
- Human resources training4 programs
- Medication aide training1 program
- Industrial maintenance technician training5 programs
- Early childhood education programs7 programs
- Aircraft mechanic school1 program
- Supply chain and logistics training3 programs
- Hospitality management programs9 programs
- Addiction counselor training6 programs
- Community health worker training2 programs
- Coding and software development courses21 programs
- Sterile processing technician training5 programs
- Sonography school1 program
- Data analytics courses18 programs
- Administrative assistant training12 programs
- Respiratory therapy programs3 programs
- Medical lab technician programs1 program
- AutoCAD and drafting courses5 programs
- Digital marketing courses5 programs
- Web and graphic design courses6 programs
- Health information technology programs6 programs
- Vet tech programs5 programs
- Security guard training2 programs
- Patient care technician training3 programs
- OTA programs1 program
- Forklift certification2 programs
- Personal trainer certification2 programs
- Healthcare administration programs1 program
- Flight school3 programs
- RBT certification training1 program
- Mental health technician training3 programs
- Human services programs4 programs
- Manufacturing technician training2 programs
- Business administration programs8 programs
- Criminal justice programs4 programs
- Sleep technician training1 program
- Solar and wind technician training2 programs
- Optician training1 program
- Construction training programs13 programs
- Dental hygiene programs3 programs
- Accounting and bookkeeping classes9 programs
- RN programs5 programs
- Project management certification28 programs
Where the Maryland welding program numbers come from
The 15 welding programs here are the ones Maryland approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 9 schools run them, and 13 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
Sources for the facts about welding classes in Maryland
Show the 10 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-4121 Welders, Cutters, Solderers, and Brazers
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Welders, Cutters, Solderers, and Brazers
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List