Forklift certification in Georgia
8 forklift programs with costs, results and funding that can make them free
Forklift certification costs more in Georgia than across the US: the typical program is $1,708, 471% above the national $299. And programs here run longer: typically 4 weeks, against 1 week nationally. Also, graduates of the typical program earned about $25,300 a year (estimated), 14% less than across the US. The rest sits close to the national figures: 99% finished and 65% were working six months later.
The 8 programs are run by 7 schools; the largest runs 2.
In Georgia, 4 of the 8 programs take students without a high school diploma and 4 ask for a diploma or equivalent.
Almost all (7 of 8) are forklift certification course; the rest is forklift and warehouse course (1 program).
They run in 6 cities across Georgia; Atlanta has the most with 2, then Decatur (2).
What a forklift operator does and how you become one: Forklift certification across the US
See the 8 programsHow much does forklift certification cost in Georgia?
$264 to $2,150 is what most forklift programs in Georgia cost if you pay yourself
That is the middle half of the 7 programs with a price. All of them: $225 to $3,000
Across the US, most cost $200 to $760.
In the typical program
- Finished the program
- 99%
- US: 98%
- Working 6 months later
- 65%
- US: 63%
- Earned a year, estimated
- about $25,300
- US: about $29,400
- Length
- 2 to 6 weeks
- US: 1 week
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Georgia. How these figures are made
What forklift and industrial truck operators earn in Georgia
$43,210 typical pay a year in May 2025; most earn $37,990 to $48,040
Across the US: $46,420 a year.
- Jobs now
- about 50,260
- Change to 2034
- +7% US: +1%
- Openings a year
- about 5,360
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Georgia labor market office, openings counting people who leave or change jobs2.
All 8 forklift programs in Georgia approved for WIOA funding
Filters
8 programs
Forklift Operation
Atlanta Technical College
Atlanta
Accredited school
No diploma needed
Earned a year, estimated$27,500Price if you pay yourselfNot reported7 students trained with WIOA funding
School website, Forklift Operation at Atlanta Technical CollegeMore details about Forklift Operation at Atlanta Technical College
- Finished
- 99%
- Working at 6 months
- 48%
- Earned in a quarter
- $6,864
- Length
- 1 week, 16 hours a week
- Cost of supplies
- Not reported
- Students counted
- 787
- Earned a year, estimated
- $27,500
- Price if you pay yourself
- Not reported
- students trained with WIOA funding
- 7
Forklift Training
Goodwill Of North Georgia
Decatur
High school diploma or equivalent
Earned a year, estimated$21,500Price if you pay yourself$1,70825 students trained with WIOA funding
More details about Forklift Training at Goodwill Of North Georgia
- Finished
- 84%
- Working at 6 months
- 65%
- Earned in a quarter
- $5,379
- Length
- 4 weeks, 38 hours a week
- Cost of supplies
- $34
- Students counted
- 222
- Earned a year, estimated
- $21,500
- Price if you pay yourself
- $1,708
- students trained with WIOA funding
- 25
Forklift Operator CertificationOSHA Federal Regulation 29 CFR part 1910.178 (powered industrial trucks)
Lanier Technical College
Gainesville
Accredited school
No diploma needed
Earned a year, estimated$25,300Price if you pay yourself$22977 students trained with WIOA funding
School website, Forklift Operator CertificationOSHA Federal Regulation 29 CFR part 1910.178 (powered industrial trucks) at Lanier Technical CollegeMore details about Forklift Operator CertificationOSHA Federal Regulation 29 CFR part 1910.178 (powered industrial trucks) at Lanier Technical College
- Finished
- 99%
- Working at 6 months
- 52%
- Earned in a quarter
- $6,314
- Length
- 12 weeks, 8 hours a week
- Cost of supplies
- None listed
- Students counted
- 119
- Earned a year, estimated
- $25,300
- Price if you pay yourself
- $229
- students trained with WIOA funding
- 77
Forklift - 2 Week Program
Goodwill Of North Georgia
Decatur
High school diploma or equivalent
Earned a year, estimated$18,900Price if you pay yourself$1,8007 students trained with WIOA funding
More details about Forklift - 2 Week Program at Goodwill Of North Georgia
- Finished
- 89%
- Working at 6 months
- 73%
- Earned in a quarter
- $4,713
- Length
- 2 weeks, 35 hours a week
- Cost of supplies
- None listed
- Students counted
- 107
- Earned a year, estimated
- $18,900
- Price if you pay yourself
- $1,800
- students trained with WIOA funding
- 7
Forklift Certification and Warehouse Distribution Specialist
Accession Distribution Training and Staffing
Riverdale
High school diploma or equivalent
Earned a year, estimated$29,400Price if you pay yourself$2,50018 students trained with WIOA funding
More details about Forklift Certification and Warehouse Distribution Specialist at Accession Distribution Training and Staffing
- Finished
- 100%
- Working at 6 months
- 79%
- Earned in a quarter
- $7,338
- Length
- 4 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 67
- Earned a year, estimated
- $29,400
- Price if you pay yourself
- $2,500
- students trained with WIOA funding
- 18
Forklift Operator Certification
Georgia Northwestern Technical College
Rome
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$225School website, Forklift Operator Certification at Georgia Northwestern Technical CollegeMore details about Forklift Operator Certification at Georgia Northwestern Technical College
- Finished
- 100%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 4 weeks, 1 hours a week
- Cost of supplies
- None listed
- Students counted
- 21
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $225
Forklift Certification
STEM Institute
Atlanta
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$3,000More details about Forklift Certification at STEM Institute
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 2 weeks, 10 hours a week
- Cost of supplies
- $849
- Students counted
- 30
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,000
Industrial Credentialing Program OSHA 30/Fork-Lift/CPR/AED
R.E.A.D. (Rapid Enhanced Active Development, Inc.)
McDonough
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$300More details about Industrial Credentialing Program OSHA 30/Fork-Lift/CPR/AED at R.E.A.D. (Rapid Enhanced Active Development, Inc.)
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 24 weeks, 24 hours a week
- Cost of supplies
- $30
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $300
No programs match these filters.
How to pay for forklift training in Georgia
WIOA funding can pay for forklift training in Georgia
All 8 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Financial aid and grants for forklift training
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 3 of the 8 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Ask the school whether its program qualifies.78
GI Bill for forklift training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 8 programs the VA approves, so ask the school or the VA.9
Quick facts: Forklift certification in Georgia
- programs with a price cost under $1,000
- 3 of 7
- forklift programs here, against the typical state's 2
- 8 vs 2
The same figures as the forklift training by state table; prices only for states with three or more schools.
Forklift certification in Atlanta, Gainesville, Rome and other Georgia cities
Choosing an area filters the program list above.
Other training in Georgia
How forklift training compares with the rest of transportation and logistics: Transportation and logistics training in Georgia
- CDL training42 programs
- CNA classes48 programs
- Medical assistant training69 programs
- Phlebotomy training40 programs
- Welding classes61 programs
- HVAC training47 programs
- Medical billing and coding training23 programs
- LPN programs24 programs
- EMT classes49 programs
- Electrician training30 programs
- Dental assistant programs31 programs
- Auto mechanic classes53 programs
- Pharmacy technician training21 programs
- Plumbing school1 program
- CNC machinist training19 programs
- Carpentry classes5 programs
- Heavy equipment operator training4 programs
- Diesel mechanic training16 programs
- Cybersecurity training21 programs
- IT training91 programs
- Cosmetology school4 programs
- EKG technician programs8 programs
- Paralegal programs12 programs
- Fire academy11 programs
- Police academy4 programs
- Surgical tech programs18 programs
- Radiology tech programs18 programs
- Culinary school24 programs
- PTA programs6 programs
- Medical administrative assistant training25 programs
- Human resources training10 programs
- Medication aide training4 programs
- Industrial maintenance technician training38 programs
- Early childhood education programs40 programs
- Aircraft mechanic school29 programs
- Supply chain and logistics training17 programs
- Hospitality management programs11 programs
- Coding and software development courses12 programs
- Lineman school9 programs
- Sterile processing technician training4 programs
- Sonography school11 programs
- Data analytics courses5 programs
- Administrative assistant training38 programs
- Respiratory therapy programs11 programs
- Medical lab technician programs9 programs
- AutoCAD and drafting courses16 programs
- Digital marketing courses18 programs
- Web and graphic design courses11 programs
- Health information technology programs12 programs
- Vet tech programs3 programs
- Patient care technician training25 programs
- OTA programs3 programs
- Crane operator training1 program
- Interpreter and translator training2 programs
- Healthcare administration programs2 programs
- Customer service training5 programs
- Flight school6 programs
- Cardiovascular technology programs3 programs
- Human services programs1 program
- Manufacturing technician training6 programs
- Electronics technician training13 programs
- Business administration programs36 programs
- Criminal justice programs32 programs
- Teacher assistant certification3 programs
- Auto body repair classes10 programs
- Solar and wind technician training2 programs
- Dialysis technician training3 programs
- Optician training4 programs
- Insurance license courses4 programs
- Construction training programs13 programs
- Dental hygiene programs9 programs
- Accounting and bookkeeping classes53 programs
- RN programs34 programs
- Project management certification13 programs
Where the Georgia forklift program numbers come from
The 8 forklift programs here are the ones Georgia approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 7 schools run them, and 6 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
Sources for the facts about forklift training in Georgia
Show the 10 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 53-7051 Industrial Truck and Tractor Operators
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Industrial Truck and Tractor Operators
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List