Retraining ReportJob training public funding can pay for

Find training

Manufacturing technician training in Washington

27 manufacturing programs with costs, results and funding that can make them free

Manufacturing technician training costs less in Washington than across the US: the typical program is $2,090, 32% below the national $3,073, the 8th-lowest of the 22 states with enough programs to compare. And programs here run shorter: typically 12 weeks, against 26 weeks nationally.

The 27 programs are run by 13 schools; the largest runs 7.

Fewer programs here take students without a high school diploma: 9 of 27, against 44% across the US.

By kind, the 27 programs here are short course or intro to manufacturing (9 programs), manufacturing technician certificate or diploma (8 programs), manufacturing (associate degree, 4 programs), plastics, composites and 3D printing (2 programs), and 4 more of 3 other kinds. The cheapest kind here is short course or intro to manufacturing, at $1,543 for the middle one of 7 with a price; the most expensive is manufacturing (associate degree), at $9,866.

They run in 11 cities across Washington; Seattle has the most with 7, then Lakewood (5) and Lynnwood (3). Nearly all (23 of 27) are at schools on the Department of Education's list of accredited institutions.

What a manufacturing technician does and how you become one: Manufacturing technician training across the US

See the 27 programs

How much does manufacturing training cost in Washington?

$1,512 to $6,090 is what most manufacturing programs in Washington cost if you pay yourself

That is the middle half of the 24 programs with a price. All of them: $575 to $10,710

Across the US, most cost $1,683 to $6,164.

In the typical program

Finished the program
Not enough data
1 program reports it; a typical figure needs 5
Working 6 months later
Not reported
None of the 27 programs report it
Earned a year, estimated
Not reported
None of the 27 programs report it
Length
11 to 40 weeks
US: 26 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Washington. How these figures are made

What assemblers and fabricators earn in Washington

$48,260 typical pay a year in May 2025; most earn $44,110 to $58,610

Across the US: $44,650 a year.

Jobs now
about 16,990
Change to 2034
−1% US: no change
Openings a year
about 1,590

The BLS has no job line that matches this field exactly; this is the nearest it tracks. Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Washington labor market office, openings counting people who leave or change jobs2.

Is there free manufacturing training in Washington?

All 27 manufacturing programs in Washington approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

27 programs

  • Short course or intro to manufacturingIn personHigh school diploma or equivalent

    Basic Manufacturing

    Shoreline Community College

    Shoreline

    Accredited school

    High school diploma or equivalent

    Shoreline Community College, ShorelineShort course or intro to manufacturing · Accredited schoolIn person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,111

    3 students trained with WIOA funding

    Program website, Basic Manufacturing at Shoreline Community College
    More details about Basic Manufacturing at Shoreline Community College
    Finished
    86%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 17 hours a week
    Cost of supplies
    None listed
    Students counted
    37
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $2,111
    students trained with WIOA funding
    3
    Program website, Basic Manufacturing at Shoreline Community College
  • Manufacturing technician certificate or diplomaIn personPrerequisite courses

    Youth Industry Partnership Initiative

    South Seattle College

    Seattle

    Accredited school

    Prerequisite courses

    South Seattle College, SeattleManufacturing technician certificate or diploma · Accredited schoolIn person · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$847

    5 students trained with WIOA funding

    Program website, Youth Industry Partnership Initiative at South Seattle College
    More details about Youth Industry Partnership Initiative at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    9 weeks, 32 hours a week
    Cost of supplies
    None listed
    Students counted
    22
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $847
    students trained with WIOA funding
    5
    Program website, Youth Industry Partnership Initiative at South Seattle College
  • Short course or intro to manufacturingIn personNo diploma needed

    Industrial Manufacturing Academy

    South Seattle College

    Seattle

    Accredited school

    No diploma needed

    South Seattle College, SeattleShort course or intro to manufacturing · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,035

    5 students trained with WIOA funding

    Program website, Industrial Manufacturing Academy at South Seattle College
    More details about Industrial Manufacturing Academy at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    11 weeks, 34 hours a week
    Cost of supplies
    None listed
    Students counted
    22
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,035
    students trained with WIOA funding
    5
    Program website, Industrial Manufacturing Academy at South Seattle College
  • Short course or intro to manufacturingIn personNo diploma needed

    Maritime Manufacturing Academy

    South Seattle College

    Seattle

    Accredited school

    No diploma needed

    South Seattle College, SeattleShort course or intro to manufacturing · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,543

    5 students trained with WIOA funding

    Program website, Maritime Manufacturing Academy at South Seattle College
    More details about Maritime Manufacturing Academy at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    11 weeks, 26 hours a week
    Cost of supplies
    None listed
    Students counted
    22
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,543
    students trained with WIOA funding
    5
    Program website, Maritime Manufacturing Academy at South Seattle College
  • Short course or intro to manufacturingIn personNo diploma needed

    Industrial Workplace Safety

    South Seattle College

    Seattle

    Accredited school

    No diploma needed

    South Seattle College, SeattleShort course or intro to manufacturing · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$575
    Program website, Industrial Workplace Safety at South Seattle College
    More details about Industrial Workplace Safety at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    2 weeks, 31 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $575
    Program website, Industrial Workplace Safety at South Seattle College
  • Manufacturing technician certificate or diplomaIn personPrerequisite courses

    Intermediate Manufacturing

    South Seattle College

    Seattle

    Accredited school

    Prerequisite courses

    South Seattle College, SeattleManufacturing technician certificate or diploma · Accredited schoolIn person · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,035
    Program website, Intermediate Manufacturing at South Seattle College
    More details about Intermediate Manufacturing at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    11 weeks, 20 hours a week
    Cost of supplies
    $400
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,035
    Program website, Intermediate Manufacturing at South Seattle College
  • Short course or intro to manufacturingIn personNo diploma needed

    Intro to Manufacturing

    South Seattle College

    Seattle

    Accredited school

    No diploma needed

    South Seattle College, SeattleShort course or intro to manufacturing · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,129
    Program website, Intro to Manufacturing at South Seattle College
    More details about Intro to Manufacturing at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 20 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,129
    Program website, Intro to Manufacturing at South Seattle College
  • Manufacturing technician certificate or diplomaHybridPrerequisite courses

    Manufacturing Pre-Employment

    Everett Community College

    Everett

    Accredited school

    Prerequisite courses

    Everett Community College, EverettManufacturing technician certificate or diploma · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,419
    Program website, Manufacturing Pre-Employment at Everett Community College
    More details about Manufacturing Pre-Employment at Everett Community College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 10 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,419
    Program website, Manufacturing Pre-Employment at Everett Community College
  • Plastics, composites and 3D printingIn personPrerequisite courses

    Additive Manufacturing Specialist Certificate

    Clover Park Technical College

    Lakewood

    Accredited school

    Prerequisite courses

    Clover Park Technical College, LakewoodPlastics, composites and 3D printing · Accredited schoolIn person · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,785
    Program website, Additive Manufacturing Specialist Certificate at Clover Park Technical College
    More details about Additive Manufacturing Specialist Certificate at Clover Park Technical College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 24 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,785
    Program website, Additive Manufacturing Specialist Certificate at Clover Park Technical College
  • Short course or intro to manufacturingHybridPrerequisite courses

    Intelligent Machine Operator (IMO) Certificate

    Clover Park Technical College

    Lakewood

    Accredited school

    Prerequisite courses

    Clover Park Technical College, LakewoodShort course or intro to manufacturing · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,785
    Program website, Intelligent Machine Operator (IMO) Certificate at Clover Park Technical College
    More details about Intelligent Machine Operator (IMO) Certificate at Clover Park Technical College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 24 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,785
    Program website, Intelligent Machine Operator (IMO) Certificate at Clover Park Technical College
  • Manufacturing technician certificate or diplomaHybridPrerequisite courses

    Manufacturing Workflow Specialist Certificate

    Clover Park Technical College

    Lakewood

    Accredited school

    Prerequisite courses

    Clover Park Technical College, LakewoodManufacturing technician certificate or diploma · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,785
    Program website, Manufacturing Workflow Specialist Certificate at Clover Park Technical College
    More details about Manufacturing Workflow Specialist Certificate at Clover Park Technical College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 24 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,785
    Program website, Manufacturing Workflow Specialist Certificate at Clover Park Technical College
  • Short course or intro to manufacturingIn personNo diploma needed

    Basic Manufacturing

    South Seattle College

    Seattle

    Accredited school

    No diploma needed

    South Seattle College, SeattleShort course or intro to manufacturing · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,835
    Program website, Basic Manufacturing at South Seattle College
    More details about Basic Manufacturing at South Seattle College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    11 weeks, 20 hours a week
    Cost of supplies
    $400
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,835
    Program website, Basic Manufacturing at South Seattle College
  • Manufacturing technician certificate or diplomaIn personHigh school diploma or equivalent

    Manufacturing Technology

    Olympic College

    Bremerton

    Accredited school

    High school diploma or equivalent

    Olympic College, BremertonManufacturing technician certificate or diploma · Accredited schoolIn person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,070
    Program website, Manufacturing Technology at Olympic College
    More details about Manufacturing Technology at Olympic College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    22 weeks, 12 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $2,070
    Program website, Manufacturing Technology at Olympic College
  • Certified Production Technician (CPT) courseHybridNo diploma needed

    Certified Production Technician

    The Moore Wright Group

    Aberdeen

    No diploma needed

    The Moore Wright Group, AberdeenCertified Production Technician (CPT) courseHybrid · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,600
    More details about Certified Production Technician at The Moore Wright Group
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    1 week, 40 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $2,600
  • Plastics, composites and 3D printingHybridPrerequisite courses

    Manufacturing Composites

    Edmonds College

    Lynnwood

    Accredited school

    Prerequisite courses

    Edmonds College, LynnwoodPlastics, composites and 3D printing · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$3,200
    Program website, Manufacturing Composites at Edmonds College
    More details about Manufacturing Composites at Edmonds College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    8 weeks, 17 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $3,200
    Program website, Manufacturing Composites at Edmonds College
  • Quality control and inspectionHybridPrerequisite courses

    Manufacturing Quality Assurance

    Edmonds College

    Lynnwood

    Accredited school

    Prerequisite courses

    Edmonds College, LynnwoodQuality control and inspection · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$3,200
    Program website, Manufacturing Quality Assurance at Edmonds College
    More details about Manufacturing Quality Assurance at Edmonds College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    8 weeks, 21 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $3,200
    Program website, Manufacturing Quality Assurance at Edmonds College
  • Quality control and inspectionOnlineHigh school diploma or equivalent

    Quality Engineer & Auditor (VU)

    Clover Park Technical College

    Based in Lakewood, WA

    Accredited school

    High school diploma or equivalent

    Clover Park Technical College, based in Lakewood, WAQuality control and inspection · Accredited schoolOnline · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$3,390
    Program website, Quality Engineer & Auditor (VU) at Clover Park Technical College
    More details about Quality Engineer & Auditor (VU) at Clover Park Technical College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    40 weeks, 3 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $3,390
    Program website, Quality Engineer & Auditor (VU) at Clover Park Technical College
  • Manufacturing technician certificate or diplomaIn personNo diploma needed

    Manufacturing Training - Auburn Location

    Orion Industries

    Auburn

    No diploma needed

    Orion Industries, AuburnManufacturing technician certificate or diplomaIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$6,000
    Program website, Manufacturing Training - Auburn Location at Orion Industries
    More details about Manufacturing Training - Auburn Location at Orion Industries
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    12 weeks, 40 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $6,000
    Program website, Manufacturing Training - Auburn Location at Orion Industries
  • Manufacturing technician certificate or diplomaHybridPrerequisite courses

    Production Technician

    Lower Columbia College

    Longview

    Accredited school

    Prerequisite courses

    Lower Columbia College, LongviewManufacturing technician certificate or diploma · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$6,361
    Program website, Production Technician at Lower Columbia College
    More details about Production Technician at Lower Columbia College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    70 weeks, 9 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $6,361
    Program website, Production Technician at Lower Columbia College
  • Manufacturing technician certificate or diplomaHybridPrerequisite courses

    Manufacturing Technology

    Skagit Valley College

    Mount Vernon

    Accredited school

    Prerequisite courses

    Skagit Valley College, Mount VernonManufacturing technician certificate or diploma · Accredited schoolHybrid · Prerequisite courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$7,008
    Program website, Manufacturing Technology at Skagit Valley College
    More details about Manufacturing Technology at Skagit Valley College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    28 weeks, 22 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $7,008
    Program website, Manufacturing Technology at Skagit Valley College
  • Manufacturing (associate degree)HybridHigh school diploma or equivalent

    Advanced Manufacturing Technology

    Lower Columbia College

    Longview

    Accredited school

    High school diploma or equivalent

    Lower Columbia College, LongviewManufacturing (associate degree) · Accredited schoolHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$8,945
    Program website, Advanced Manufacturing Technology at Lower Columbia College
    More details about Advanced Manufacturing Technology at Lower Columbia College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    60 weeks, 17 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $8,945
    Program website, Advanced Manufacturing Technology at Lower Columbia College
  • Manufacturing (associate degree)HybridHigh school diploma or equivalent

    Engineering Technology - Manufacturing and Materials Technology

    Edmonds College

    Lynnwood

    Accredited school

    High school diploma or equivalent

    Edmonds College, LynnwoodManufacturing (associate degree) · Accredited schoolHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$9,683
    Program website, Engineering Technology - Manufacturing and Materials Technology at Edmonds College
    More details about Engineering Technology - Manufacturing and Materials Technology at Edmonds College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    60 weeks, 15 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $9,683
    Program website, Engineering Technology - Manufacturing and Materials Technology at Edmonds College
  • Manufacturing (associate degree)HybridHigh school diploma or equivalent

    Engineering Technology

    Skagit Valley College

    Mount Vernon

    Accredited school

    High school diploma or equivalent

    Skagit Valley College, Mount VernonManufacturing (associate degree) · Accredited schoolHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$9,866
    Program website, Engineering Technology at Skagit Valley College
    More details about Engineering Technology at Skagit Valley College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    60 weeks, 16 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $9,866
    Program website, Engineering Technology at Skagit Valley College
  • Manufacturing (associate degree)HybridHigh school diploma or equivalent

    Manufacturing Engineering Technologies (MET)

    Clover Park Technical College

    Lakewood

    Accredited school

    High school diploma or equivalent

    Clover Park Technical College, LakewoodManufacturing (associate degree) · Accredited schoolHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$10,710
    Program website, Manufacturing Engineering Technologies (MET) at Clover Park Technical College
    More details about Manufacturing Engineering Technologies (MET) at Clover Park Technical College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    60 weeks, 16 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $10,710
    Program website, Manufacturing Engineering Technologies (MET) at Clover Park Technical College
  • Short course or intro to manufacturingIn personNo diploma needed

    Certified Manufacturing Associate (CMfgA) (Voucher Included)

    Pierce College

    Lakewood

    Accredited school

    No diploma needed

    Pierce College, LakewoodShort course or intro to manufacturing · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    Program website, Certified Manufacturing Associate (CMfgA) (Voucher Included) at Pierce College
    More details about Certified Manufacturing Associate (CMfgA) (Voucher Included) at Pierce College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    Not reported
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    Not reported
    Program website, Certified Manufacturing Associate (CMfgA) (Voucher Included) at Pierce College
  • Manufacturing apprenticeshipIn personHigh school diploma or equivalent

    Industrial Manufacturing Technician

    AJAC - Maintenance Apprenticeship Committee

    Kent

    High school diploma or equivalent

    AJAC - Maintenance Apprenticeship Committee, KentManufacturing apprenticeshipIn person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    Program website, Industrial Manufacturing Technician at AJAC - Maintenance Apprenticeship Committee
    More details about Industrial Manufacturing Technician at AJAC - Maintenance Apprenticeship Committee
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    45 weeks, 40 hours a week
    Cost of supplies
    Not reported
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    Not reported
    Program website, Industrial Manufacturing Technician at AJAC - Maintenance Apprenticeship Committee
  • Short course or intro to manufacturingIn personNo diploma needed

    Manufacturing Academy

    AJAC - Manufacturing Academy

    Kent

    No diploma needed

    AJAC - Manufacturing Academy, KentShort course or intro to manufacturingIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about Manufacturing Academy at AJAC - Manufacturing Academy
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    Not reported
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    Not reported

How to pay for manufacturing training in Washington

WIOA funding can pay for manufacturing training in Washington

All 27 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for manufacturing training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 23 of the 27 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Check with the school before you count on it.78

GI Bill for manufacturing training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 27 programs the VA approves, so ask the school or the VA.9

Quick facts: Manufacturing technician training in Washington

programs with a price cost under $2,000
11 of 24
lowest typical price among the states with enough programs to compare
8th of 22
manufacturing programs here, against the typical state's 7
27 vs 7

The same figures as the manufacturing training by state table; prices only for states with three or more schools.

Manufacturing technician training in Seattle, Longview, Mount Vernon and other Washington cities

Areas with 10 or more programs have a page of their own. Choosing another area filters the program list above. 1 program is online.

Other training in Washington

How manufacturing training compares with the rest of skilled trades: Trade school programs in Washington

Where the Washington manufacturing program numbers come from

The 27 manufacturing programs here are the ones Washington approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 13 schools run them, and 1 of them reports how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about manufacturing training in Washington

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-2090 Miscellaneous Assemblers and Fabricators
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Miscellaneous Assemblers and Fabricators
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List