Industrial maintenance technician training in Georgia
38 industrial maintenance programs with costs, results and funding that can make them free
In Georgia, 29% of students finished the typical program, against 67% across the US. And graduates of the typical program earned about $43,600 a year (estimated), 13% less than across the US, the 6th-lowest of the 16 states with enough programs to compare. But in Georgia, 87% were working six months after leaving, against 81% across the US.
The 38 programs are run by 16 schools; the largest runs 5.
Fewer programs here take students without a high school diploma: 4 of 38, against 38% across the US.
By kind, the 38 programs here are industrial maintenance certificate or diploma (18 programs), industrial maintenance (associate degree, 8 programs), mechatronics and automation (8 programs) and short course or single skill (4 programs). The cheapest kind here is short course or single skill, at $1,656 for the middle one of 4 with a price; the most expensive is industrial maintenance (associate degree), at $8,496.
More of them can be taken online or hybrid than across the US: 17 of 38, against 29% nationwide. They're spread over 16 cities, none with more than 5. All 38 are at schools on the Department of Education's list of accredited institutions.
What an industrial maintenance technician does and how you become one: Industrial maintenance technician training across the US
See the 38 programsHow much does industrial maintenance training cost in Georgia?
- Certificates and short courses (30 programs)
- $4,420 to $6,406most of them, usually 18 to 60 weeks long
- Two-year degrees (8 programs)
- $7,744 to $9,701most of them, usually 70 to 75 weeks long
What you pay yourself for the whole program, as the schools report it. "Most" is the middle half of the programs with a price.
In the typical program
- Finished the program
- 29%
- US: 67%
- Working 6 months later
- 87%
- US: 81%
- Earned a year, estimated
- about $43,600
- US: about $50,400
- Length
- 30 to 60 weeks
- US: 52 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Georgia. How these figures are made
What industrial machinery mechanics earn in Georgia
$61,130 typical pay a year in May 2025; most earn $50,200 to $75,360
Across the US: $64,520 a year.
- Jobs now
- about 14,230
- Change to 2034
- +20% US: +16%
- Openings a year
- about 1,440
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Georgia labor market office, openings counting people who leave or change jobs2.
All 38 industrial maintenance programs in Georgia approved for WIOA funding
Filters
38 programs
Industrial Systems Technology (IS13) Associate of Applied Science Degree
Georgia Northwestern Technical College
Rome
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,300Price if you pay yourself$8,4965 students trained with WIOA funding
Program website, Industrial Systems Technology (IS13) Associate of Applied Science Degree at Georgia Northwestern Technical CollegeMore details about Industrial Systems Technology (IS13) Associate of Applied Science Degree at Georgia Northwestern Technical College
- Finished
- 27%
- Working at 6 months
- 88%
- Earned in a quarter
- $11,067
- Length
- 75 weeks, 10 hours a week
- Cost of supplies
- $1,800
- Students counted
- 167
- Earned a year, estimated
- $44,300
- Price if you pay yourself
- $8,496
- students trained with WIOA funding
- 5
Industrial Systems Technology (IST4) Diploma
Georgia Northwestern Technical College
Rome
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,100Price if you pay yourself$6,6003 students trained with WIOA funding
Program website, Industrial Systems Technology (IST4) Diploma at Georgia Northwestern Technical CollegeMore details about Industrial Systems Technology (IST4) Diploma at Georgia Northwestern Technical College
- Finished
- 13%
- Working at 6 months
- 94%
- Earned in a quarter
- $11,035
- Length
- 55 weeks, 8 hours a week
- Cost of supplies
- $1,300
- Students counted
- 135
- Earned a year, estimated
- $44,100
- Price if you pay yourself
- $6,600
- students trained with WIOA funding
- 3
Industrial Systems Technology (formerly Applied Engineering Technology) - AAS
George C Wallace Community College
Dothan, AL
Accredited school
High school diploma or equivalent
Classes are outside Georgia; Georgia approved the program for its funding.
Earned a year, estimatedNot reportedPrice if you pay yourself$11,867Program website, Industrial Systems Technology (formerly Applied Engineering Technology) - AAS at George C Wallace Community CollegeMore details about Industrial Systems Technology (formerly Applied Engineering Technology) - AAS at George C Wallace Community College
- Finished
- 69%
- Working at 6 months
- 78%
- Earned in a quarter
- Not reported
- Length
- 75 weeks, 21 hours a week
- Cost of supplies
- $2,205
- Students counted
- 100
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $11,867
INDUSTRIAL SYSTEMS TECHNOLOGY Degree--IS13
Lanier Technical College
Gainesville
Accredited school
High school diploma or equivalent
Earned a year, estimated$56,500Price if you pay yourself$8,115School website, INDUSTRIAL SYSTEMS TECHNOLOGY Degree--IS13 at Lanier Technical CollegeMore details about INDUSTRIAL SYSTEMS TECHNOLOGY Degree--IS13 at Lanier Technical College
- Finished
- 29%
- Working at 6 months
- 92%
- Earned in a quarter
- $14,119
- Length
- 75 weeks, 15 hours a week
- Cost of supplies
- $1,200
- Students counted
- 87
- Earned a year, estimated
- $56,500
- Price if you pay yourself
- $8,115
Industrial Systems Technology Diploma (IST4)
Central Georgia Technical College
Warner Robins
Accredited school
High school diploma or equivalent
Earned a year, estimated$41,600Price if you pay yourself$6,411School website, Industrial Systems Technology Diploma (IST4) at Central Georgia Technical CollegeMore details about Industrial Systems Technology Diploma (IST4) at Central Georgia Technical College
- Finished
- Not reported
- Working at 6 months
- 73%
- Earned in a quarter
- $10,400
- Length
- 58 weeks, 40 hours a week
- Cost of supplies
- $1,500
- Students counted
- 76
- Earned a year, estimated
- $41,600
- Price if you pay yourself
- $6,411
Industrial Systems Technology Degree (IS13)
Central Georgia Technical College
Warner Robins
Accredited school
High school diploma or equivalent
Earned a year, estimated$50,300Price if you pay yourself$7,533School website, Industrial Systems Technology Degree (IS13) at Central Georgia Technical CollegeMore details about Industrial Systems Technology Degree (IS13) at Central Georgia Technical College
- Finished
- 20%
- Working at 6 months
- 79%
- Earned in a quarter
- $12,585
- Length
- 102 weeks, 40 hours a week
- Cost of supplies
- None listed
- Students counted
- 72
- Earned a year, estimated
- $50,300
- Price if you pay yourself
- $7,533
INDUSTRIAL SYSTEMS TECHNOLOGY- Diploma--IMS2
Wiregrass Georgia Technical College
Valdosta
Accredited school
High school diploma or equivalent
Earned a year, estimated$45,900Price if you pay yourself$5,3404 students trained with WIOA funding
School website, INDUSTRIAL SYSTEMS TECHNOLOGY- Diploma--IMS2 at Wiregrass Georgia Technical CollegeMore details about INDUSTRIAL SYSTEMS TECHNOLOGY- Diploma--IMS2 at Wiregrass Georgia Technical College
- Finished
- 17%
- Working at 6 months
- 85%
- Earned in a quarter
- $11,481
- Length
- 60 weeks, 40 hours a week
- Cost of supplies
- $300
- Students counted
- 69
- Earned a year, estimated
- $45,900
- Price if you pay yourself
- $5,340
- students trained with WIOA funding
- 4
Industrial Maintenance Systems Degree--Im23
Savannah Technical College
Savannah
Accredited school
High school diploma or equivalent
Earned a year, estimated$26,100Price if you pay yourself$5,787School website, Industrial Maintenance Systems Degree--Im23 at Savannah Technical CollegeMore details about Industrial Maintenance Systems Degree--Im23 at Savannah Technical College
- Finished
- 23%
- Working at 6 months
- 100%
- Earned in a quarter
- $6,526
- Length
- 32 weeks, 40 hours a week
- Cost of supplies
- $265
- Students counted
- 57
- Earned a year, estimated
- $26,100
- Price if you pay yourself
- $5,787
Instrumentation and Controls Technician (IA13) Associate of Applied Science Degree
Georgia Northwestern Technical College
Rome
Accredited school
High school diploma or equivalent
Earned a year, estimated$43,900Price if you pay yourself$9,9004 students trained with WIOA funding
Program website, Instrumentation and Controls Technician (IA13) Associate of Applied Science Degree at Georgia Northwestern Technical CollegeMore details about Instrumentation and Controls Technician (IA13) Associate of Applied Science Degree at Georgia Northwestern Technical College
- Finished
- 23%
- Working at 6 months
- 73%
- Earned in a quarter
- $10,965
- Length
- 55 weeks, 10 hours a week
- Cost of supplies
- $2,000
- Students counted
- 56
- Earned a year, estimated
- $43,900
- Price if you pay yourself
- $9,900
- students trained with WIOA funding
- 4
Mechatronics Technology - Diploma--MTD2
Lanier Technical College
Gainesville
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$6,152School website, Mechatronics Technology - Diploma--MTD2 at Lanier Technical CollegeMore details about Mechatronics Technology - Diploma--MTD2 at Lanier Technical College
- Finished
- 29%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 60 weeks, 15 hours a week
- Cost of supplies
- $2,000
- Students counted
- 48
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,152
Industrial Systems Technology - Diploma--IS13
Southern Regional Technical College
Thomasville
Accredited school
High school diploma or equivalent
Earned a year, estimated$35,900Price if you pay yourself$6,9043 students trained with WIOA funding
School website, Industrial Systems Technology - Diploma--IS13 at Southern Regional Technical CollegeMore details about Industrial Systems Technology - Diploma--IS13 at Southern Regional Technical College
- Finished
- 27%
- Working at 6 months
- 87%
- Earned in a quarter
- $8,976
- Length
- 75 weeks, 16 hours a week
- Cost of supplies
- $1,288
- Students counted
- 48
- Earned a year, estimated
- $35,900
- Price if you pay yourself
- $6,904
- students trained with WIOA funding
- 3
Mechatronics Technology - Associate Degree--MT23
Lanier Technical College
Gainesville
Accredited school
High school diploma or equivalent
Earned a year, estimated$42,100Price if you pay yourself$7,815School website, Mechatronics Technology - Associate Degree--MT23 at Lanier Technical CollegeMore details about Mechatronics Technology - Associate Degree--MT23 at Lanier Technical College
- Finished
- 36%
- Working at 6 months
- 82%
- Earned in a quarter
- $10,515
- Length
- 75 weeks, 15 hours a week
- Cost of supplies
- $2,300
- Students counted
- 45
- Earned a year, estimated
- $42,100
- Price if you pay yourself
- $7,815
Electrical Control Systems Diploma--Ec22
Oconee Fall Line Technical College
Sandersville
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,693School website, Electrical Control Systems Diploma--Ec22 at Oconee Fall Line Technical CollegeMore details about Electrical Control Systems Diploma--Ec22 at Oconee Fall Line Technical College
- Finished
- 38%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 45 weeks, 40 hours a week
- Cost of supplies
- $1,760
- Students counted
- 31
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,693
INDUSTRIAL SYSTEMS TECHNOLOGY Diploma--IST4
Lanier Technical College
Gainesville
Accredited school
High school diploma or equivalent
Earned a year, estimated$59,600Price if you pay yourself$6,052School website, INDUSTRIAL SYSTEMS TECHNOLOGY Diploma--IST4 at Lanier Technical CollegeMore details about INDUSTRIAL SYSTEMS TECHNOLOGY Diploma--IST4 at Lanier Technical College
- Finished
- 33%
- Working at 6 months
- 100%
- Earned in a quarter
- $14,892
- Length
- 60 weeks, 15 hours a week
- Cost of supplies
- $1,200
- Students counted
- 22
- Earned a year, estimated
- $59,600
- Price if you pay yourself
- $6,052
INDUSTRIAL MECHANICAL SYSTEMS Diploma--IMS2
Lanier Technical College
Gainesville
Accredited school
High school diploma or equivalent
Earned a year, estimated$37,600Price if you pay yourself$6,55216 students trained with WIOA funding
School website, INDUSTRIAL MECHANICAL SYSTEMS Diploma--IMS2 at Lanier Technical CollegeMore details about INDUSTRIAL MECHANICAL SYSTEMS Diploma--IMS2 at Lanier Technical College
- Finished
- 100%
- Working at 6 months
- 100%
- Earned in a quarter
- $9,391
- Length
- 60 weeks, 15 hours a week
- Cost of supplies
- $1,200
- Students counted
- 19
- Earned a year, estimated
- $37,600
- Price if you pay yourself
- $6,552
- students trained with WIOA funding
- 16
Industrial Systems Technology, Dip
Coastal Pines Technical College
Waycross
Accredited school
High school diploma or equivalent
Earned a year, estimated$43,400Price if you pay yourself$5,210More details about Industrial Systems Technology, Dip at Coastal Pines Technical College
- Finished
- Not reported
- Working at 6 months
- 100%
- Earned in a quarter
- $10,849
- Length
- 45 weeks, 15 hours a week
- Cost of supplies
- $850
- Students counted
- 12
- Earned a year, estimated
- $43,400
- Price if you pay yourself
- $5,210
Industrial Maintenance
Savannah Technical College
Savannah
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$6,136School website, Industrial Maintenance at Savannah Technical CollegeMore details about Industrial Maintenance at Savannah Technical College
- Finished
- 80%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 12 weeks, 10 hours a week
- Cost of supplies
- None listed
- Students counted
- 12
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,136
Mechatronics Technology-Associate of Applied Science degree --MT23--
Augusta Technical College
Augusta
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$9,635More details about Mechatronics Technology-Associate of Applied Science degree --MT23-- at Augusta Technical College
- Finished
- 67%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 75 weeks, 18 hours a week
- Cost of supplies
- $1,123
- Students counted
- 11
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $9,635
Industrial Maintenance - Workplace Fundamentals
Georgia Piedmont Technical College
Clarkston
Accredited school
High school diploma or equivalent
Earned a year, estimated$39,800Price if you pay yourself$7,0008 students trained with WIOA funding
More details about Industrial Maintenance - Workplace Fundamentals at Georgia Piedmont Technical College
- Finished
- 89%
- Working at 6 months
- 86%
- Earned in a quarter
- $9,945
- Length
- 10 weeks, 40 hours a week
- Cost of supplies
- None listed
- Students counted
- 10
- Earned a year, estimated
- $39,800
- Price if you pay yourself
- $7,000
- students trained with WIOA funding
- 8
AI Enhanced Robotic Manufacturing Specialist Technical Certificate (AE81)
Central Georgia Technical College
Warner Robins
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,041School website, AI Enhanced Robotic Manufacturing Specialist Technical Certificate (AE81) at Central Georgia Technical CollegeMore details about AI Enhanced Robotic Manufacturing Specialist Technical Certificate (AE81) at Central Georgia Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 17 hours a week
- Cost of supplies
- $130
- Students counted
- 22
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,041
Electrical Control Systems (EC22) Diploma
Georgia Northwestern Technical College
Rome
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$6,600Program website, Electrical Control Systems (EC22) Diploma at Georgia Northwestern Technical CollegeMore details about Electrical Control Systems (EC22) Diploma at Georgia Northwestern Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 55 weeks, 18 hours a week
- Cost of supplies
- $1,800
- Students counted
- 16
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,600
Electrical Maintenance Technician (EM81) Certificate
Georgia Northwestern Technical College
Rome
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$3,300Program website, Electrical Maintenance Technician (EM81) Certificate at Georgia Northwestern Technical CollegeMore details about Electrical Maintenance Technician (EM81) Certificate at Georgia Northwestern Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 2 hours a week
- Cost of supplies
- $750
- Students counted
- 15
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,300
Industrial Fluid Power Technician, Tcc--If11
Coastal Pines Technical College
Waycross
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,567More details about Industrial Fluid Power Technician, Tcc--If11 at Coastal Pines Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 15 hours a week
- Cost of supplies
- $550
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,567
Industrial Motor Control Technician, Tcc--Im41
Coastal Pines Technical College
Waycross
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$1,656More details about Industrial Motor Control Technician, Tcc--Im41 at Coastal Pines Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 15 hours a week
- Cost of supplies
- $550
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,656
Programmable Control Technician I, Tcc--Pc81
Coastal Pines Technical College
Waycross
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,656More details about Programmable Control Technician I, Tcc--Pc81 at Coastal Pines Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 15 hours a week
- Cost of supplies
- $550
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,656
Nccer Industrial Maintenance Technician --Ik71--
Southeastern Technical College
Vidalia
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$2,873More details about Nccer Industrial Maintenance Technician --Ik71-- at Southeastern Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 30 weeks, 12 hours a week
- Cost of supplies
- $3,600
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,873
Industrial Mechanical Systems
West Georgia Technical College
Waco
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$3,196More details about Industrial Mechanical Systems at West Georgia Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 48 weeks, 22 hours a week
- Cost of supplies
- $144
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,196
Advanced Manufacturing Systems Technology Diploma
North Georgia Technical College
Clarkesville
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$4,300More details about Advanced Manufacturing Systems Technology Diploma at North Georgia Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 52 weeks, 40 hours a week
- Cost of supplies
- $3,300
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,300
Electrical Control Systems --Ec22--
Georgia Piedmont Technical College
Clarkston
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$4,779More details about Electrical Control Systems --Ec22-- at Georgia Piedmont Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 52 weeks, 40 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,779
Industrial Maintenance Fast Track--Im31
Ogeechee Technical College
Statesboro
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$4,850More details about Industrial Maintenance Fast Track--Im31 at Ogeechee Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 16 weeks, 32 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,850
Industrial Systems Technology--Is13
Savannah Technical College
Savannah
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$4,897School website, Industrial Systems Technology--Is13 at Savannah Technical CollegeMore details about Industrial Systems Technology--Is13 at Savannah Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 32 weeks, 40 hours a week
- Cost of supplies
- $265
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,897
Industrial Systems Fast Track--Is61
Ogeechee Technical College
Statesboro
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,250More details about Industrial Systems Fast Track--Is61 at Ogeechee Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 24 weeks, 40 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,250
Electrical Control Systems--Ec22
Ogeechee Technical College
Statesboro
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,307More details about Electrical Control Systems--Ec22 at Ogeechee Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 40 weeks, 40 hours a week
- Cost of supplies
- $1,410
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,307
Electrical Control Systems, Dip--Ec22
Coastal Pines Technical College
Waycross
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,400More details about Electrical Control Systems, Dip--Ec22 at Coastal Pines Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 60 weeks, 12 hours a week
- Cost of supplies
- $1,400
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,400
Nccer Industrial Electrical And Maintenance Technology Diploma --Is22--
Southeastern Technical College
Vidalia
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,800More details about Nccer Industrial Electrical And Maintenance Technology Diploma --Is22-- at Southeastern Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 30 weeks, 12 hours a week
- Cost of supplies
- $4,600
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,800
Industrial Mechanical Systems Diploma --Ims2
Oconee Fall Line Technical College
Sandersville
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$6,393School website, Industrial Mechanical Systems Diploma --Ims2 at Oconee Fall Line Technical CollegeMore details about Industrial Mechanical Systems Diploma --Ims2 at Oconee Fall Line Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 60 weeks, 40 hours a week
- Cost of supplies
- $1,450
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,393
Industrial Maintenance Technology--Im31
South Georgia Technical College
Americus
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$6,995School website, Industrial Maintenance Technology--Im31 at South Georgia Technical CollegeMore details about Industrial Maintenance Technology--Im31 at South Georgia Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 35 weeks, 40 hours a week
- Cost of supplies
- $1,250
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,995
Mechatronics Technology-Diploma --MTD2--
Augusta Technical College
Augusta
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$7,494More details about Mechatronics Technology-Diploma --MTD2-- at Augusta Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 75 weeks, 15 hours a week
- Cost of supplies
- $1,123
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $7,494
No programs match these filters.
How to pay for industrial maintenance training in Georgia
WIOA funding can pay for industrial maintenance training in Georgia
All 38 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Financial aid and grants for industrial maintenance training
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 38 programs here are at schools on the Department of Education's accreditation list. Ask the school whether its program qualifies.78
GI Bill for industrial maintenance training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 38 programs the VA approves, so ask the school or the VA.9
Quick facts: Industrial maintenance technician training in Georgia
- programs with a price cost under $5,000
- 11 of 38
- lowest typical price among the states with enough programs to compare
- 18th of 29
- other states where the typical program's graduates earned less
- 5 of 15
- industrial maintenance programs here, against the typical state's 9
- 38 vs 9
The same figures as the industrial maintenance training by state table; prices only for states with three or more schools.
Industrial maintenance technician training in Rome, Gainesville, Waycross and other Georgia cities
Choosing an area filters the program list above. 12 more programs are in 8 other areas, 2 in smaller cities and towns.
Other training in Georgia
How industrial maintenance training compares with the rest of skilled trades: Trade school programs in Georgia
- CDL training42 programs
- CNA classes48 programs
- Medical assistant training69 programs
- Phlebotomy training40 programs
- Welding classes61 programs
- HVAC training47 programs
- Medical billing and coding training23 programs
- LPN programs24 programs
- EMT classes49 programs
- Electrician training30 programs
- Dental assistant programs31 programs
- Auto mechanic classes53 programs
- Pharmacy technician training21 programs
- Plumbing school1 program
- CNC machinist training19 programs
- Carpentry classes5 programs
- Heavy equipment operator training4 programs
- Diesel mechanic training16 programs
- Cybersecurity training21 programs
- IT training91 programs
- Cosmetology school4 programs
- EKG technician programs8 programs
- Paralegal programs12 programs
- Fire academy11 programs
- Police academy4 programs
- Surgical tech programs18 programs
- Radiology tech programs18 programs
- Culinary school24 programs
- PTA programs6 programs
- Medical administrative assistant training25 programs
- Human resources training10 programs
- Medication aide training4 programs
- Early childhood education programs40 programs
- Aircraft mechanic school29 programs
- Supply chain and logistics training17 programs
- Hospitality management programs11 programs
- Coding and software development courses12 programs
- Lineman school9 programs
- Sterile processing technician training4 programs
- Sonography school11 programs
- Data analytics courses5 programs
- Administrative assistant training38 programs
- Respiratory therapy programs11 programs
- Medical lab technician programs9 programs
- AutoCAD and drafting courses16 programs
- Digital marketing courses18 programs
- Web and graphic design courses11 programs
- Health information technology programs12 programs
- Vet tech programs3 programs
- Patient care technician training25 programs
- OTA programs3 programs
- Crane operator training1 program
- Interpreter and translator training2 programs
- Forklift certification8 programs
- Healthcare administration programs2 programs
- Customer service training5 programs
- Flight school6 programs
- Cardiovascular technology programs3 programs
- Human services programs1 program
- Manufacturing technician training6 programs
- Electronics technician training13 programs
- Business administration programs36 programs
- Criminal justice programs32 programs
- Teacher assistant certification3 programs
- Auto body repair classes10 programs
- Solar and wind technician training2 programs
- Dialysis technician training3 programs
- Optician training4 programs
- Insurance license courses4 programs
- Construction training programs13 programs
- Dental hygiene programs9 programs
- Accounting and bookkeeping classes53 programs
- RN programs34 programs
- Project management certification13 programs
Where the Georgia industrial maintenance program numbers come from
The 38 industrial maintenance programs here are the ones Georgia approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 16 schools run them, and 19 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
Sources for the facts about industrial maintenance training in Georgia
Show the 10 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 49-9041 Industrial Machinery Mechanics
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Industrial Machinery Mechanics
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List