CNC machinist training in Wisconsin
40 CNC machinist programs with costs, results and funding that can make them free
Graduates of the typical program earned about $43,800 a year (estimated), 8% more than across the US, the 6th-highest of the 16 states with enough programs to compare. The rest sits close to the national figures: the typical price is $4,937, 73% finished and 78% were working six months later.
The 40 programs are run by 16 schools; the largest runs 9.
More programs here take students without a high school diploma: 25 of 40, against 42% across the US.
By kind, the 40 programs here are machinist certificate or diploma (22 programs), CNC or machine operator (10 programs), short course or single class (3 programs), machinist apprenticeship (3 programs), and 2 more of one other kind. The cheapest kind here is short course or single class, at $1,511 for the middle one of 3 with a price; the most expensive is machinist certificate or diploma, at $5,510.
Fewer of them can be taken online or hybrid than across the US: 8 of 40, against 32% nationwide. They run in 14 cities across Wisconsin; Rice Lake has the most with 9, then Pewaukee (4) and Madison (4). Nearly all (39 of 40) are at schools on the Department of Education's list of accredited institutions.
What a CNC machinist does and how you become one: CNC machinist training across the US
See the 40 programsHow much does CNC machinist training cost in Wisconsin?
$2,484 to $8,387 is what most CNC machinist programs in Wisconsin cost if you pay yourself
That is the middle half of the 40 programs with a price. All of them: $680 to $14,581
Across the US, most cost $2,301 to $7,400.
In the typical program
- Finished the program
- 73%
- US: 71%
- Working 6 months later
- 78%
- US: 80%
- Earned a year, estimated
- about $43,800
- US: about $40,700
- Length
- 30 to 64 weeks
- US: 32 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Wisconsin. How these figures are made
What CNC tool operators earn in Wisconsin
$52,690 typical pay a year in May 2025; most earn $47,170 to $61,990
Across the US: $50,690 a year.
- Jobs now
- about 8,330
- Change to 2034
- −7% US: −11%
- Openings a year
- about 860
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Wisconsin labor market office, openings counting people who leave or change jobs2.
All 40 CNC machinist programs in Wisconsin approved for WIOA funding
Filters
40 programs
CNC Operator
Gateway Technical College
Kenosha
Accredited school
No diploma needed
Earned a year, estimated$39,500Price if you pay yourself$2,390Program website, CNC Operator at Gateway Technical CollegeMore details about CNC Operator at Gateway Technical College
- Finished
- 100%
- Working at 6 months
- 63%
- Earned in a quarter
- $9,886
- Length
- 15 weeks, 31 hours a week
- Cost of supplies
- None listed
- Students counted
- 326
- Earned a year, estimated
- $39,500
- Price if you pay yourself
- $2,390
CNC Production Technician
Gateway Technical College
Kenosha
Accredited school
No diploma needed
Earned a year, estimated$44,400Price if you pay yourself$5,264Program website, CNC Production Technician at Gateway Technical CollegeMore details about CNC Production Technician at Gateway Technical College
- Finished
- 32%
- Working at 6 months
- 76%
- Earned in a quarter
- $11,091
- Length
- 30 weeks, 35 hours a week
- Cost of supplies
- None listed
- Students counted
- 222
- Earned a year, estimated
- $44,400
- Price if you pay yourself
- $5,264
CNC Programmer
Gateway Technical College
Kenosha
Accredited school
No diploma needed
Earned a year, estimated$44,600Price if you pay yourself$7,644Program website, CNC Programmer at Gateway Technical CollegeMore details about CNC Programmer at Gateway Technical College
- Finished
- 41%
- Working at 6 months
- 77%
- Earned in a quarter
- $11,158
- Length
- 45 weeks, 35 hours a week
- Cost of supplies
- None listed
- Students counted
- 170
- Earned a year, estimated
- $44,600
- Price if you pay yourself
- $7,644
CNC Setup Technician
Waukesha County Technical College
Pewaukee
Accredited school
No diploma needed
Earned a year, estimated$44,700Price if you pay yourself$3,377Program website, CNC Setup Technician at Waukesha County Technical CollegeMore details about CNC Setup Technician at Waukesha County Technical College
- Finished
- 64%
- Working at 6 months
- 56%
- Earned in a quarter
- $11,169
- Length
- 32 weeks, 30 hours a week
- Cost of supplies
- None listed
- Students counted
- 166
- Earned a year, estimated
- $44,700
- Price if you pay yourself
- $3,377
Machine Tool Technician
Fox Valley Technical College
Appleton
Accredited school
No diploma needed
Earned a year, estimated$53,500Price if you pay yourself$11,224Program website, Machine Tool Technician at Fox Valley Technical CollegeMore details about Machine Tool Technician at Fox Valley Technical College
- Finished
- 63%
- Working at 6 months
- 86%
- Earned in a quarter
- $13,371
- Length
- Not reported
- Cost of supplies
- $1,891
- Students counted
- 143
- Earned a year, estimated
- $53,500
- Price if you pay yourself
- $11,224
Machine Tool Operations
Milwaukee Area Technical College
Milwaukee
Accredited school
High school diploma or equivalent
Earned a year, estimated$36,500Price if you pay yourself$4,5763 students trained with WIOA funding
Program website, Machine Tool Operations at Milwaukee Area Technical CollegeMore details about Machine Tool Operations at Milwaukee Area Technical College
- Finished
- 25%
- Working at 6 months
- 64%
- Earned in a quarter
- $9,122
- Length
- 32 weeks, 19 hours a week
- Cost of supplies
- $2,505
- Students counted
- 120
- Earned a year, estimated
- $36,500
- Price if you pay yourself
- $4,576
- students trained with WIOA funding
- 3
CNC Technician
Northeast Wisconsin Technical College
Green Bay
Accredited school
High school diploma or equivalent
Earned a year, estimated$47,300Price if you pay yourself$10,914Program website, CNC Technician at Northeast Wisconsin Technical CollegeMore details about CNC Technician at Northeast Wisconsin Technical College
- Finished
- 69%
- Working at 6 months
- 81%
- Earned in a quarter
- $11,832
- Length
- 90 weeks, 15 hours a week
- Cost of supplies
- $2,600
- Students counted
- 119
- Earned a year, estimated
- $47,300
- Price if you pay yourself
- $10,914
Machine Tool Operation
Waukesha County Technical College
Pewaukee
Accredited school
No diploma needed
Earned a year, estimated$47,400Price if you pay yourself$4,845Program website, Machine Tool Operation at Waukesha County Technical CollegeMore details about Machine Tool Operation at Waukesha County Technical College
- Finished
- 58%
- Working at 6 months
- 81%
- Earned in a quarter
- $11,839
- Length
- 32 weeks, 30 hours a week
- Cost of supplies
- None listed
- Students counted
- 113
- Earned a year, estimated
- $47,400
- Price if you pay yourself
- $4,845
Machine Tooling Technics
Chippewa Valley Technical College
Eau Claire
Accredited school
High school diploma or equivalent
Earned a year, estimated$48,800Price if you pay yourself$14,581Program website, Machine Tooling Technics at Chippewa Valley Technical CollegeMore details about Machine Tooling Technics at Chippewa Valley Technical College
- Finished
- 81%
- Working at 6 months
- 87%
- Earned in a quarter
- $12,203
- Length
- 64 weeks, 31 hours a week
- Cost of supplies
- $1,696
- Students counted
- 97
- Earned a year, estimated
- $48,800
- Price if you pay yourself
- $14,581
CNC Machinist
Northeast Wisconsin Technical College
Green Bay
Accredited school
High school diploma or equivalent
Earned a year, estimated$34,900Price if you pay yourself$5,510Program website, CNC Machinist at Northeast Wisconsin Technical CollegeMore details about CNC Machinist at Northeast Wisconsin Technical College
- Finished
- 95%
- Working at 6 months
- 84%
- Earned in a quarter
- $8,713
- Length
- 32 weeks, 15 hours a week
- Cost of supplies
- $2,100
- Students counted
- 84
- Earned a year, estimated
- $34,900
- Price if you pay yourself
- $5,510
Intro to Precision Machining
Lakeshore Technical College
Cleveland
Accredited school
No diploma needed
Earned a year, estimated$47,500Price if you pay yourself$1,511Program website, Intro to Precision Machining at Lakeshore Technical CollegeMore details about Intro to Precision Machining at Lakeshore Technical College
- Finished
- 100%
- Working at 6 months
- 87%
- Earned in a quarter
- $11,881
- Length
- Not reported
- Cost of supplies
- $200
- Students counted
- 69
- Earned a year, estimated
- $47,500
- Price if you pay yourself
- $1,511
Machinist Apprentice
Waukesha County Technical College
Pewaukee
Accredited school
No diploma needed
Earned a year, estimated$53,900Price if you pay yourself$2,349Program website, Machinist Apprentice at Waukesha County Technical CollegeMore details about Machinist Apprentice at Waukesha County Technical College
- Finished
- 85%
- Working at 6 months
- 71%
- Earned in a quarter
- $13,482
- Length
- 128 weeks, 30 hours a week
- Cost of supplies
- None listed
- Students counted
- 69
- Earned a year, estimated
- $53,900
- Price if you pay yourself
- $2,349
Machine Tool Operator
Chippewa Valley Technical College
Eau Claire
Accredited school
High school diploma or equivalent
Earned a year, estimated$43,100Price if you pay yourself$8,065Program website, Machine Tool Operator at Chippewa Valley Technical CollegeMore details about Machine Tool Operator at Chippewa Valley Technical College
- Finished
- 75%
- Working at 6 months
- 74%
- Earned in a quarter
- $10,780
- Length
- 32 weeks, 33 hours a week
- Cost of supplies
- $1,696
- Students counted
- 68
- Earned a year, estimated
- $43,100
- Price if you pay yourself
- $8,065
Machine Tooling Technics
Madison Area Technical College
Madison
Accredited school
High school diploma or equivalent
Earned a year, estimated$46,200Price if you pay yourself$11,951School website, Machine Tooling Technics at Madison Area Technical CollegeMore details about Machine Tooling Technics at Madison Area Technical College
- Finished
- 70%
- Working at 6 months
- 81%
- Earned in a quarter
- $11,559
- Length
- 64 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 62
- Earned a year, estimated
- $46,200
- Price if you pay yourself
- $11,951
Precision Machining Technology
Lakeshore Technical College
Cleveland
Accredited school
No diploma needed
Earned a year, estimated$47,300Price if you pay yourself$5,493Program website, Precision Machining Technology at Lakeshore Technical CollegeMore details about Precision Machining Technology at Lakeshore Technical College
- Finished
- 61%
- Working at 6 months
- 95%
- Earned in a quarter
- $11,835
- Length
- Not reported
- Cost of supplies
- $676
- Students counted
- 54
- Earned a year, estimated
- $47,300
- Price if you pay yourself
- $5,493
Precision Machining & Programming
Western Technical College
La Crosse
Accredited school
High school diploma or equivalent
Earned a year, estimated$43,200Price if you pay yourself$4,480Program website, Precision Machining & Programming at Western Technical CollegeMore details about Precision Machining & Programming at Western Technical College
- Finished
- 36%
- Working at 6 months
- 71%
- Earned in a quarter
- $10,799
- Length
- 45 weeks, 21 hours a week
- Cost of supplies
- None listed
- Students counted
- 52
- Earned a year, estimated
- $43,200
- Price if you pay yourself
- $4,480
CNC Automation Technician
Lakeshore Technical College
Cleveland
Accredited school
No diploma needed
Earned a year, estimated$45,600Price if you pay yourself$10,524Program website, CNC Automation Technician at Lakeshore Technical CollegeMore details about CNC Automation Technician at Lakeshore Technical College
- Finished
- 27%
- Working at 6 months
- 89%
- Earned in a quarter
- $11,390
- Length
- Not reported
- Cost of supplies
- $601
- Students counted
- 49
- Earned a year, estimated
- $45,600
- Price if you pay yourself
- $10,524
Machine Tool Operations
Madison Area Technical College
Madison
Accredited school
High school diploma or equivalent
Earned a year, estimated$32,400Price if you pay yourself$6,344Program website, Machine Tool Operations at Madison Area Technical CollegeMore details about Machine Tool Operations at Madison Area Technical College
- Finished
- 87%
- Working at 6 months
- 76%
- Earned in a quarter
- $8,111
- Length
- 32 weeks, 34 hours a week
- Cost of supplies
- None listed
- Students counted
- 41
- Earned a year, estimated
- $32,400
- Price if you pay yourself
- $6,344
Computer Numeric Control Technician
Blackhawk Technical College
Janesville
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,300Price if you pay yourself$9,354Program website, Computer Numeric Control Technician at Blackhawk Technical CollegeMore details about Computer Numeric Control Technician at Blackhawk Technical College
- Finished
- 16%
- Working at 6 months
- 75%
- Earned in a quarter
- $11,076
- Length
- 64 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 41
- Earned a year, estimated
- $44,300
- Price if you pay yourself
- $9,354
Entry Level Manufacturing Skills – Machining Certificate
Wisconsin Regional Training Partnership, Inc
Milwaukee
No diploma needed
Earned a year, estimated$36,600Price if you pay yourself$4,50017 students trained with WIOA funding
Program website, Entry Level Manufacturing Skills – Machining Certificate at Wisconsin Regional Training Partnership, IncMore details about Entry Level Manufacturing Skills – Machining Certificate at Wisconsin Regional Training Partnership, Inc
- Finished
- 57%
- Working at 6 months
- 87%
- Earned in a quarter
- $9,156
- Length
- Not reported
- Cost of supplies
- $730
- Students counted
- 39
- Earned a year, estimated
- $36,600
- Price if you pay yourself
- $4,500
- students trained with WIOA funding
- 17
Machinist
Northcentral Technical College
Wausau
Accredited school
High school diploma or equivalent
Earned a year, estimated$22,700Price if you pay yourself$2,012More details about Machinist at Northcentral Technical College
- Finished
- 28%
- Working at 6 months
- 60%
- Earned in a quarter
- $5,683
- Length
- 128 weeks, 12 hours a week
- Cost of supplies
- None listed
- Students counted
- 37
- Earned a year, estimated
- $22,700
- Price if you pay yourself
- $2,012
Precision Machining Technician
Mid-State Technical College
Wisconsin Rapids
Accredited school
High school diploma or equivalent
Earned a year, estimated$36,600Price if you pay yourself$10,368Program website, Precision Machining Technician at Mid-State Technical CollegeMore details about Precision Machining Technician at Mid-State Technical College
- Finished
- 75%
- Working at 6 months
- 71%
- Earned in a quarter
- $9,147
- Length
- 64 weeks, 14 hours a week
- Cost of supplies
- $533
- Students counted
- 29
- Earned a year, estimated
- $36,600
- Price if you pay yourself
- $10,368
Machine Tool Operation
Northcentral Technical College
Wausau
Accredited school
No diploma needed
Earned a year, estimated$44,600Price if you pay yourself$5,030More details about Machine Tool Operation at Northcentral Technical College
- Finished
- 71%
- Working at 6 months
- 80%
- Earned in a quarter
- $11,143
- Length
- 64 weeks, 24 hours a week
- Cost of supplies
- None listed
- Students counted
- 27
- Earned a year, estimated
- $44,600
- Price if you pay yourself
- $5,030
Machine Tool Basics
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimated$22,200Price if you pay yourself$1,000Program website, Machine Tool Basics at Northwood Technical CollegeMore details about Machine Tool Basics at Northwood Technical College
- Finished
- 94%
- Working at 6 months
- 80%
- Earned in a quarter
- $5,548
- Length
- 9 weeks, 10 hours a week
- Cost of supplies
- None listed
- Students counted
- 26
- Earned a year, estimated
- $22,200
- Price if you pay yourself
- $1,000
Machine Tool Technics
Northcentral Technical College
Wausau
Accredited school
No diploma needed
Earned a year, estimated$44,800Price if you pay yourself$9,724More details about Machine Tool Technics at Northcentral Technical College
- Finished
- 80%
- Working at 6 months
- 85%
- Earned in a quarter
- $11,200
- Length
- 64 weeks, 24 hours a week
- Cost of supplies
- None listed
- Students counted
- 24
- Earned a year, estimated
- $44,800
- Price if you pay yourself
- $9,724
Basic Machining
Madison Area Technical College
Madison
Accredited school
High school diploma or equivalent
Earned a year, estimated$21,800Price if you pay yourself$2,746Program website, Basic Machining at Madison Area Technical CollegeMore details about Basic Machining at Madison Area Technical College
- Finished
- 100%
- Working at 6 months
- 38%
- Earned in a quarter
- $5,458
- Length
- 16 weeks, 30 hours a week
- Cost of supplies
- None listed
- Students counted
- 22
- Earned a year, estimated
- $21,800
- Price if you pay yourself
- $2,746
Basic Machining
Northcentral Technical College
Wausau
Accredited school
No diploma needed
Earned a year, estimated$19,600Price if you pay yourself$2,515More details about Basic Machining at Northcentral Technical College
- Finished
- 94%
- Working at 6 months
- 78%
- Earned in a quarter
- $4,899
- Length
- 16 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 21
- Earned a year, estimated
- $19,600
- Price if you pay yourself
- $2,515
CNC Setup Technician
Madison Area Technical College
Madison
Accredited school
High school diploma or equivalent
Earned a year, estimated$21,800Price if you pay yourself$4,536Program website, CNC Setup Technician at Madison Area Technical CollegeMore details about CNC Setup Technician at Madison Area Technical College
- Finished
- 100%
- Working at 6 months
- 38%
- Earned in a quarter
- $5,458
- Length
- 32 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 21
- Earned a year, estimated
- $21,800
- Price if you pay yourself
- $4,536
CNC Machine Operator/Programmer
Southwest Wisconsin Technical College
Fennimore
Accredited school
No diploma needed
Earned a year, estimated$35,400Price if you pay yourself$5,580Program website, CNC Machine Operator/Programmer at Southwest Wisconsin Technical CollegeMore details about CNC Machine Operator/Programmer at Southwest Wisconsin Technical College
- Finished
- 78%
- Working at 6 months
- 80%
- Earned in a quarter
- $8,842
- Length
- 32 weeks, 40 hours a week
- Cost of supplies
- None listed
- Students counted
- 18
- Earned a year, estimated
- $35,400
- Price if you pay yourself
- $5,580
CNC Operator
Western Technical College
La Crosse
Accredited school
High school diploma or equivalent
Earned a year, estimated$25,900Price if you pay yourself$800Program website, CNC Operator at Western Technical CollegeMore details about CNC Operator at Western Technical College
- Finished
- 100%
- Working at 6 months
- 32%
- Earned in a quarter
- $6,467
- Length
- 30 weeks, 12 hours a week
- Cost of supplies
- None listed
- Students counted
- 13
- Earned a year, estimated
- $25,900
- Price if you pay yourself
- $800
Pretech for CNC Machining
Waukesha County Technical College - Local Programs
Pewaukee
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$680School website, Pretech for CNC Machining at Waukesha County Technical College - Local ProgramsMore details about Pretech for CNC Machining at Waukesha County Technical College - Local Programs
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 26 weeks, 10 hours a week
- Cost of supplies
- $200
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $680
Machine Tool Basics - Operator
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$975Program website, Machine Tool Basics - Operator at Northwood Technical CollegeMore details about Machine Tool Basics - Operator at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 12 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $975
Basic Machining
Western Technical College
La Crosse
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$1,920Program website, Basic Machining at Western Technical CollegeMore details about Basic Machining at Western Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 24 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,920
Multi-Axis CNC Milling
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,212Program website, Multi-Axis CNC Milling at Northwood Technical CollegeMore details about Multi-Axis CNC Milling at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 16 weeks, 27 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,212
CNC Technician
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,785Program website, CNC Technician at Northwood Technical CollegeMore details about CNC Technician at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 36 weeks, 15 hours a week
- Cost of supplies
- $2,150
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,785
Entry Level Machining
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$4,266Program website, Entry Level Machining at Northwood Technical CollegeMore details about Entry Level Machining at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 32 weeks, 29 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,266
Machine Tool Operation
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$5,271Program website, Machine Tool Operation at Northwood Technical CollegeMore details about Machine Tool Operation at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 32 weeks, 31 hours a week
- Cost of supplies
- $1,625
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,271
Machine Tool Operation - CNC
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$6,340Program website, Machine Tool Operation - CNC at Northwood Technical CollegeMore details about Machine Tool Operation - CNC at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 32 weeks, 35 hours a week
- Cost of supplies
- $2,150
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,340
Machine Tooling Technics
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$10,298Program website, Machine Tooling Technics at Northwood Technical CollegeMore details about Machine Tooling Technics at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 64 weeks, 32 hours a week
- Cost of supplies
- $2,350
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $10,298
Machine Tool Technician
Northwood Technical College
Rice Lake
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$11,219Program website, Machine Tool Technician at Northwood Technical CollegeMore details about Machine Tool Technician at Northwood Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 58 weeks, 38 hours a week
- Cost of supplies
- $1,400
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $11,219
No programs match these filters.
How to pay for CNC machinist training in Wisconsin
WIOA funding can pay for CNC machinist training in Wisconsin
All 40 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Paid machinist apprenticeships
An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. 3 of the programs on this page are apprenticeships.7
Financial aid and grants for CNC machinist training
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 39 of the 40 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Check with the school before you count on it.89
GI Bill for CNC machinist training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 40 programs the VA approves, so ask the school or the VA.10
Quick facts: CNC machinist training in Wisconsin
- programs with a price cost under $2,000
- 6 of 40
- lowest typical price among the states with enough programs to compare
- 18th of 34
- other states where the typical program's graduates earned less
- 10 of 15
- CNC machinist programs here, against the typical state's 12
- 40 vs 12
The same figures as the CNC machinist training by state table; prices only for states with three or more schools.
Do pricier CNC machinist programs in Wisconsin have better results?
It depends on what you count. The pricier half of CNC machinist programs in Wisconsin typically costs $9,354, about 3 times as much as the cheaper half's $2,746: the share working six months later and earnings came out higher, the share finishing lower. In the pricier half, graduates earned about $44,600 a year, against about $36,600; 70% finished, against 85%; 81% were working six months later, against 71%.
The pricier programs also run longer, typically 55 weeks against 32, so part of the price pays for more teaching.
Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.
How this is worked out: the 30 CNC machinist programs here that report both a price and results, split at the middle price into two halves of 15. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.
Machinist apprenticeships in Wisconsin
A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.11
You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. This page lists 3 machinist apprenticeships approved for WIOA funding in Wisconsin. Ask what you'll pay for the classes and what you'll earn on the job.
CNC machinist training in Rice Lake, Milwaukee, Madison and other Wisconsin cities
Choosing an area filters the program list above. 10 more programs are in 6 other areas, 1 in smaller cities and towns.
Other training in Wisconsin
How CNC machinist training compares with the rest of skilled trades: Trade school programs in Wisconsin
- CDL training35 programs
- CNA classes36 programs
- Medical assistant training33 programs
- Phlebotomy training18 programs
- Welding classes53 programs
- HVAC training25 programs
- Medical billing and coding training28 programs
- LPN programs9 programs
- EMT classes53 programs
- Electrician training17 programs
- Dental assistant programs18 programs
- Auto mechanic classes43 programs
- Pharmacy technician training12 programs
- Plumbing school9 programs
- Carpentry classes17 programs
- Heavy equipment operator training4 programs
- Diesel mechanic training20 programs
- Cybersecurity training21 programs
- IT training70 programs
- Cosmetology school13 programs
- Barber school6 programs
- Esthetician school7 programs
- Nail tech school9 programs
- EKG technician programs2 programs
- Massage therapy school7 programs
- Paralegal programs16 programs
- Fire academy14 programs
- Police academy13 programs
- Surgical tech programs14 programs
- Radiology tech programs8 programs
- Culinary school34 programs
- Home health aide training20 programs
- PTA programs5 programs
- Medical administrative assistant training26 programs
- Human resources training36 programs
- Medication aide training2 programs
- Industrial maintenance technician training63 programs
- Early childhood education programs51 programs
- Aircraft mechanic school2 programs
- Supply chain and logistics training27 programs
- Hospitality management programs20 programs
- Addiction counselor training15 programs
- Community health worker training3 programs
- Coding and software development courses30 programs
- Lineman school8 programs
- Sterile processing technician training2 programs
- Sonography school4 programs
- Data analytics courses12 programs
- Administrative assistant training53 programs
- Respiratory therapy programs7 programs
- Medical lab technician programs13 programs
- AutoCAD and drafting courses22 programs
- Digital marketing courses23 programs
- Web and graphic design courses29 programs
- Health information technology programs15 programs
- Vet tech programs9 programs
- Real estate school6 programs
- Security guard training3 programs
- OTA programs4 programs
- Crane operator training4 programs
- Interpreter and translator training2 programs
- Forklift certification1 program
- Personal trainer certification2 programs
- Healthcare administration programs8 programs
- Customer service training11 programs
- Flight school2 programs
- Cardiovascular technology programs1 program
- Human services programs10 programs
- Manufacturing technician training33 programs
- Electronics technician training19 programs
- Business administration programs79 programs
- Criminal justice programs22 programs
- Teacher assistant certification17 programs
- Auto body repair classes10 programs
- Solar and wind technician training6 programs
- Water treatment operator training2 programs
- OSHA safety training7 programs
- Dialysis technician training1 program
- Optician training3 programs
- Masonry training3 programs
- Insurance license courses1 program
- Construction training programs12 programs
- Dental hygiene programs7 programs
- Accounting and bookkeeping classes51 programs
- RN programs20 programs
- Project management certification21 programs
Where the Wisconsin machinist program numbers come from
The 40 machinist programs here are the ones Wisconsin approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 16 schools run them, and 30 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
Sources for the facts about CNC machinist training in Wisconsin
Show the 12 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Computer Numerically Controlled Tool Operators
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List