AutoCAD and drafting courses in Utah
9 CAD and drafting programs with costs, results and funding that can make them free
AutoCAD and drafting courses cost less in Utah than across the US: the typical program is $3,098, 39% below the national $5,064, the 6th-lowest of the 30 states with enough programs to compare.
The 9 programs are run by 8 schools; the largest runs 2.
In Utah, 3 of the 9 programs take students without a high school diploma, 5 ask for a diploma or equivalent and 1 asks for earlier courses first.
By kind, the 9 programs here are drafting and design certificate or diploma (5 programs), drafting and design (associate degree, 2 programs), AutoCAD course (1 program) and SolidWorks, Revit and other CAD software course (1 program).
They run in 7 cities across Utah; Salt Lake City has the most with 3. Nearly all (8 of 9) are at schools on the Department of Education's list of accredited institutions.
What a CAD drafter does and how you become one: AutoCAD and drafting courses across the US
See the 9 programsHow much do CAD and drafting courses cost in Utah?
$2,770 to $5,583 is what most CAD and drafting programs in Utah cost if you pay yourself
That is the middle half of the 9 programs with a price. All of them: $1,140 to $12,540
Across the US, most cost $2,743 to $8,827.
In the typical program
- Finished the program
- Not enough data
- 4 programs report it; a typical figure needs 5
- Working 6 months later
- Left out
- Utah's rates sit far below every other state's
- Earned a year, estimated
- Not enough data
- 2 programs report it; a typical figure needs 5
- Length
- 15 to 60 weeks
- US: 33 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Utah. How these figures are made
What architectural and civil drafters earn in Utah
$64,290 typical pay a year in May 2025; most earn $56,020 to $80,860
Across the US: $66,150 a year.
- Jobs now
- about 1,820
- Change to 2034
- +14% US: +4%
- Openings a year
- about 160
The BLS has no job line that matches this field exactly; this is the nearest it tracks. Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Utah labor market office, openings counting people who leave or change jobs2.
All 9 CAD and drafting programs in Utah approved for WIOA funding
Filters
9 programs
Drafting and Design Technology Technician, General
Utah Valley University, All Locations
Orem
Accredited school
High school diploma or equivalent
Earned a year, estimated$11,500Price if you pay yourself$12,540School website, Drafting and Design Technology Technician, General at Utah Valley University, All LocationsMore details about Drafting and Design Technology Technician, General at Utah Valley University, All Locations
- Finished
- 37%
- Working at 6 months
- Left out
- Earned in a quarter
- $2,865
- Length
- 60 weeks, 15 hours a week
- Cost of supplies
- $1,500
- Students counted
- 264
- Earned a year, estimated
- $11,500
- Price if you pay yourself
- $12,540
CAD CADD Drafting and or Design Technology Technician
Ogden Weber Technical College, Ogden
Ogden
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,770School website, CAD CADD Drafting and or Design Technology Technician at Ogden Weber Technical College, OgdenMore details about CAD CADD Drafting and or Design Technology Technician at Ogden Weber Technical College, Ogden
- Finished
- 50%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 34 weeks, 15 hours a week
- Cost of supplies
- $2,895
- Students counted
- 176
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,770
CAD CADD Drafting and or Design Technology Technician
Davis Technical College, All Locations
Kaysville
Accredited school
High school diploma or equivalent
Earned a year, estimated$40,400Price if you pay yourself$2,848School website, CAD CADD Drafting and or Design Technology Technician at Davis Technical College, All LocationsMore details about CAD CADD Drafting and or Design Technology Technician at Davis Technical College, All Locations
- Finished
- 28%
- Working at 6 months
- Left out
- Earned in a quarter
- $10,109
- Length
- 64 weeks, 15 hours a week
- Cost of supplies
- $280
- Students counted
- 167
- Earned a year, estimated
- $40,400
- Price if you pay yourself
- $2,848
Architectural Technology Technician
Online Consulting Inc Dba Onlc Training Centers, Salt Lake City
Salt Lake City
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$3,250More details about Architectural Technology Technician at Online Consulting Inc Dba Onlc Training Centers, Salt Lake City
- Finished
- 100%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 2 weeks, 35 hours a week
- Cost of supplies
- $125
- Students counted
- 10
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,250
Civil Drafting and Civil Engineering CAD CADD
Uintah Basin Technical College, All Locations
Roosevelt
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,140School website, Civil Drafting and Civil Engineering CAD CADD at Uintah Basin Technical College, All LocationsMore details about Civil Drafting and Civil Engineering CAD CADD at Uintah Basin Technical College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 15 weeks, 24 hours a week
- Cost of supplies
- Not reported
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,140
CAD CADD Drafting and or Design Technology Technician
Salt Lake Community College, All Locations
Salt Lake City
Accredited school
Prerequisite courses
Earned a year, estimatedNot reportedPrice if you pay yourself$1,349Program website, CAD CADD Drafting and or Design Technology Technician at Salt Lake Community College, All LocationsMore details about CAD CADD Drafting and or Design Technology Technician at Salt Lake Community College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 7 weeks, 8 hours a week
- Cost of supplies
- Not reported
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,349
CAD CADD Drafting and or Design Technology Technician
Utah State University, All Locations
Logan
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$3,099School website, CAD CADD Drafting and or Design Technology Technician at Utah State University, All LocationsMore details about CAD CADD Drafting and or Design Technology Technician at Utah State University, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 30 weeks, 17 hours a week
- Cost of supplies
- $500
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,099
Drafting and Design Technology Technician, General
Dixie Technical College, St George Campus
St. George
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,583School website, Drafting and Design Technology Technician, General at Dixie Technical College, St George CampusMore details about Drafting and Design Technology Technician, General at Dixie Technical College, St George Campus
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 50 weeks, 20 hours a week
- Cost of supplies
- $1,063
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,583
Drafting and Design Technology Technician, General
Salt Lake Community College, All Locations
Salt Lake City
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$9,893Program website, Drafting and Design Technology Technician, General at Salt Lake Community College, All LocationsMore details about Drafting and Design Technology Technician, General at Salt Lake Community College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 64 weeks, 30 hours a week
- Cost of supplies
- $640
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $9,893
No programs match these filters.
How to pay for CAD and drafting courses in Utah
WIOA funding can pay for CAD and drafting courses in Utah
All 9 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Financial aid and grants for CAD and drafting courses
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 8 of the 9 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. The school can tell you whether its program qualifies.78
GI Bill for CAD and drafting courses
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 9 programs the VA approves, so ask the school or the VA.9
Quick facts: AutoCAD and drafting courses in Utah
- programs with a price cost under $3,000
- 4 of 9
- lowest typical price among the states with enough programs to compare
- 6th of 30
- CAD and drafting programs here, against the typical state's 7
- 9 vs 7
The same figures as the CAD and drafting courses by state table; prices only for states with three or more schools.
AutoCAD and drafting courses in Salt Lake City, Ogden, Provo and other Utah cities
Choosing an area filters the program list above. 1 in smaller cities and towns.
Other training in Utah
How CAD and drafting courses compare with the rest of skilled trades: Trade school programs in Utah
- CDL training20 programs
- CNA classes15 programs
- Medical assistant training13 programs
- Phlebotomy training11 programs
- Welding classes11 programs
- HVAC training6 programs
- Medical billing and coding training7 programs
- LPN programs10 programs
- EMT classes17 programs
- Electrician training8 programs
- Dental assistant programs9 programs
- Auto mechanic classes11 programs
- Pharmacy technician training11 programs
- Plumbing school7 programs
- CNC machinist training9 programs
- Carpentry classes3 programs
- Heavy equipment operator training3 programs
- Diesel mechanic training11 programs
- Cybersecurity training4 programs
- IT training33 programs
- Cosmetology school6 programs
- Barber school3 programs
- Esthetician school3 programs
- Nail tech school4 programs
- Massage therapy school2 programs
- Paralegal programs4 programs
- Fire academy3 programs
- Police academy5 programs
- Surgical tech programs6 programs
- Radiology tech programs3 programs
- Culinary school11 programs
- PTA programs3 programs
- Medical administrative assistant training6 programs
- Human resources training3 programs
- Industrial maintenance technician training9 programs
- Early childhood education programs5 programs
- Aircraft mechanic school1 program
- Supply chain and logistics training1 program
- Hospitality management programs1 program
- Addiction counselor training1 program
- Coding and software development courses13 programs
- Lineman school1 program
- Sterile processing technician training2 programs
- Sonography school1 program
- Data analytics courses3 programs
- Administrative assistant training9 programs
- Respiratory therapy programs3 programs
- Medical lab technician programs5 programs
- Digital marketing courses2 programs
- Web and graphic design courses15 programs
- Health information technology programs5 programs
- Vet tech programs3 programs
- Real estate school2 programs
- OTA programs2 programs
- Interpreter and translator training1 program
- Home inspector training1 program
- Personal trainer certification2 programs
- Healthcare administration programs1 program
- Customer service training2 programs
- Flight school1 program
- Manufacturing technician training3 programs
- Electronics technician training3 programs
- Business administration programs8 programs
- Criminal justice programs2 programs
- Teacher assistant certification1 program
- Auto body repair classes3 programs
- Solar and wind technician training1 program
- Construction training programs9 programs
- Dental hygiene programs3 programs
- Accounting and bookkeeping classes5 programs
- RN programs8 programs
- Project management certification6 programs
Where the Utah drafting program numbers come from
The 9 drafting programs here are the ones Utah approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 8 schools run them, and 4 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
How reliable are the Utah figures?
We leave out the share working 6 months later for Utah: its rates sit far below every other state's.
Sources for the facts about CAD and drafting courses in Utah
Show the 10 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 17-3011 Architectural and Civil Drafters
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Architectural and Civil Drafters
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List