CNC machinist training in Utah
9 CNC machinist programs with costs, results and funding that can make them free
CNC machinist training costs less in Utah than across the US: the typical program is $2,963, 39% below the national $4,845, the 7th-lowest of the 34 states with enough programs to compare.
The 9 programs are run by 8 schools; the largest runs 2.
In Utah, 4 of the 9 programs take students without a high school diploma, 4 ask for a diploma or equivalent and 1 asks for earlier courses first.
All 9 are the same kind of program: machinist certificate or diploma.
They run in 7 cities across Utah; Logan has the most with 2, then Salt Lake City (2). All 9 are at schools on the Department of Education's list of accredited institutions.
What a CNC machinist does and how you become one: CNC machinist training across the US
See the 9 programsHow much does CNC machinist training cost in Utah?
$2,143 to $4,937 is what most CNC machinist programs in Utah cost if you pay yourself
That is the middle half of the 9 programs with a price. All of them: $1,559 to $8,380
Across the US, most cost $2,301 to $7,400.
In the typical program
- Finished the program
- Not enough data
- 3 programs report it; a typical figure needs 5
- Working 6 months later
- Left out
- Utah's rates sit far below every other state's
- Earned a year, estimated
- Not enough data
- 2 programs report it; a typical figure needs 5
- Length
- 32 to 43 weeks
- US: 32 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Utah. How these figures are made
What CNC tool operators earn in Utah
$45,140 typical pay a year in May 2025; most earn $39,050 to $51,120
Across the US: $50,690 a year.
- Jobs now
- about 1,170
- Change to 2034
- −5% US: −11%
- Openings a year
- about 80
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Utah labor market office, openings counting people who leave or change jobs2.
All 9 CNC machinist programs in Utah approved for WIOA funding
Filters
9 programs
Machine Tool Technology Machinist
Davis Technical College, All Locations
Kaysville
Accredited school
No diploma needed
Earned a year, estimated$43,500Price if you pay yourself$2,080School website, Machine Tool Technology Machinist at Davis Technical College, All LocationsMore details about Machine Tool Technology Machinist at Davis Technical College, All Locations
- Finished
- 33%
- Working at 6 months
- Left out
- Earned in a quarter
- $10,887
- Length
- 43 weeks, 15 hours a week
- Cost of supplies
- $113
- Students counted
- 240
- Earned a year, estimated
- $43,500
- Price if you pay yourself
- $2,080
Machine Tool Technology Machinist
Ogden Weber Technical College, Ogden
Ogden
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,143Program website, Machine Tool Technology Machinist at Ogden Weber Technical College, OgdenMore details about Machine Tool Technology Machinist at Ogden Weber Technical College, Ogden
- Finished
- 27%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 32 weeks, 13 hours a week
- Cost of supplies
- $1,198
- Students counted
- 139
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,143
Machine Tool Technology Machinist
Bridgerland Technical College, All Locations
Logan
Accredited school
Education and courses
Earned a year, estimated$43,800Price if you pay yourself$2,955School website, Machine Tool Technology Machinist at Bridgerland Technical College, All LocationsMore details about Machine Tool Technology Machinist at Bridgerland Technical College, All Locations
- Finished
- 74%
- Working at 6 months
- Left out
- Earned in a quarter
- $10,948
- Length
- 34 weeks, 16 hours a week
- Cost of supplies
- $288
- Students counted
- 67
- Earned a year, estimated
- $43,800
- Price if you pay yourself
- $2,955
Machine Tool Technology Machinist
Utah State University, All Locations
Logan
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$2,963School website, Machine Tool Technology Machinist at Utah State University, All LocationsMore details about Machine Tool Technology Machinist at Utah State University, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 30 weeks, 16 hours a week
- Cost of supplies
- $500
- Students counted
- 20
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,963
Machine Tool Technology Machinist
Salt Lake Community College, All Locations
Salt Lake City
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,559Program website, Machine Tool Technology Machinist at Salt Lake Community College, All LocationsMore details about Machine Tool Technology Machinist at Salt Lake Community College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 20 weeks, 20 hours a week
- Cost of supplies
- Not reported
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,559
Computer Numerically Controlled CNC Machinist Technology CNC Machinist
Mountainland Technical College, All Locations
Lehi
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$3,956Program website, Computer Numerically Controlled CNC Machinist Technology CNC Machinist at Mountainland Technical College, All LocationsMore details about Computer Numerically Controlled CNC Machinist Technology CNC Machinist at Mountainland Technical College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 68 weeks, 15 hours a week
- Cost of supplies
- $1,456
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,956
Computer Numerically Controlled CNC Machinist Technology CNC Machinist
Salt Lake Community College, All Locations
Salt Lake City
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$4,937Program website, Computer Numerically Controlled CNC Machinist Technology CNC Machinist at Salt Lake Community College, All LocationsMore details about Computer Numerically Controlled CNC Machinist Technology CNC Machinist at Salt Lake Community College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 53 weeks, 15 hours a week
- Cost of supplies
- Not reported
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $4,937
Computer Numerically Controlled CNC Machinist Technology CNC Machinist
Dixie Technical College, St George Campus
St. George
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$5,014School website, Computer Numerically Controlled CNC Machinist Technology CNC Machinist at Dixie Technical College, St George CampusMore details about Computer Numerically Controlled CNC Machinist Technology CNC Machinist at Dixie Technical College, St George Campus
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 42 weeks, 20 hours a week
- Cost of supplies
- $350
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,014
Machine Tool Technology Machinist
Snow College, All Locations
Ephraim
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$8,380Program website, Machine Tool Technology Machinist at Snow College, All LocationsMore details about Machine Tool Technology Machinist at Snow College, All Locations
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 32 weeks, 15 hours a week
- Cost of supplies
- $600
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $8,380
No programs match these filters.
How to pay for CNC machinist training in Utah
WIOA funding can pay for CNC machinist training in Utah
All 9 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Paid machinist apprenticeships
An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. None of the programs on this page is one.7
Financial aid and grants for CNC machinist training
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 9 programs here are at schools on the Department of Education's accreditation list. The school can tell you whether its program qualifies.89
GI Bill for CNC machinist training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 9 programs the VA approves, so ask the school or the VA.10
Quick facts: CNC machinist training in Utah
- lowest typical price among the states with enough programs to compare
- 7th of 34
- CNC machinist programs here, against the typical state's 12
- 9 vs 12
The same figures as the CNC machinist training by state table; prices only for states with three or more schools.
Machinist apprenticeships in Utah
A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.11
You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. None of the CNC machinist programs on this page is an apprenticeship.
CNC machinist training in Ogden, Logan, Salt Lake City and other Utah cities
Choosing an area filters the program list above. 1 in smaller cities and towns.
Other training in Utah
How CNC machinist training compares with the rest of skilled trades: Trade school programs in Utah
- CDL training20 programs
- CNA classes15 programs
- Medical assistant training13 programs
- Phlebotomy training11 programs
- Welding classes11 programs
- HVAC training6 programs
- Medical billing and coding training7 programs
- LPN programs10 programs
- EMT classes17 programs
- Electrician training8 programs
- Dental assistant programs9 programs
- Auto mechanic classes11 programs
- Pharmacy technician training11 programs
- Plumbing school7 programs
- Carpentry classes3 programs
- Heavy equipment operator training3 programs
- Diesel mechanic training11 programs
- Cybersecurity training4 programs
- IT training33 programs
- Cosmetology school6 programs
- Barber school3 programs
- Esthetician school3 programs
- Nail tech school4 programs
- Massage therapy school2 programs
- Paralegal programs4 programs
- Fire academy3 programs
- Police academy5 programs
- Surgical tech programs6 programs
- Radiology tech programs3 programs
- Culinary school11 programs
- PTA programs3 programs
- Medical administrative assistant training6 programs
- Human resources training3 programs
- Industrial maintenance technician training9 programs
- Early childhood education programs5 programs
- Aircraft mechanic school1 program
- Supply chain and logistics training1 program
- Hospitality management programs1 program
- Addiction counselor training1 program
- Coding and software development courses13 programs
- Lineman school1 program
- Sterile processing technician training2 programs
- Sonography school1 program
- Data analytics courses3 programs
- Administrative assistant training9 programs
- Respiratory therapy programs3 programs
- Medical lab technician programs5 programs
- AutoCAD and drafting courses9 programs
- Digital marketing courses2 programs
- Web and graphic design courses15 programs
- Health information technology programs5 programs
- Vet tech programs3 programs
- Real estate school2 programs
- OTA programs2 programs
- Interpreter and translator training1 program
- Home inspector training1 program
- Personal trainer certification2 programs
- Healthcare administration programs1 program
- Customer service training2 programs
- Flight school1 program
- Manufacturing technician training3 programs
- Electronics technician training3 programs
- Business administration programs8 programs
- Criminal justice programs2 programs
- Teacher assistant certification1 program
- Auto body repair classes3 programs
- Solar and wind technician training1 program
- Construction training programs9 programs
- Dental hygiene programs3 programs
- Accounting and bookkeeping classes5 programs
- RN programs8 programs
- Project management certification6 programs
Where the Utah machinist program numbers come from
The 9 machinist programs here are the ones Utah approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 8 schools run them, and 3 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
How reliable are the Utah figures?
We leave out the share working 6 months later for Utah: its rates sit far below every other state's.
Sources for the facts about CNC machinist training in Utah
Show the 12 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Computer Numerically Controlled Tool Operators
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List