Retraining ReportJob training public funding can pay for

Find training

Manufacturing technician training in Tennessee

18 manufacturing programs with costs, results and funding that can make them free

Manufacturing technician training costs less in Tennessee than across the US: the typical program is $2,439, 21% below the national $3,073. And programs here run shorter: typically 18 weeks, against 26 weeks nationally.

The 18 programs are run by 14 schools; the largest runs 4.

More programs here take students without a high school diploma: 11 of 18, against 44% across the US.

By kind, the 18 programs here are manufacturing technician certificate or diploma (9 programs), certified Production Technician (CPT) course (3 programs), short course or intro to manufacturing (2 programs), quality control and inspection (2 programs), and 2 more of one other kind. The cheapest kind here is certified Production Technician (CPT) course, at $2,378 for the middle one of 3 with a price; the most expensive is manufacturing technician certificate or diploma, at $4,008.

Fewer of them can be taken online or hybrid than across the US: 3 of 18, against 46% nationwide. They run in 13 cities across Tennessee; Dyersburg has the most with 4, then Newbern (2) and Memphis (2). All 18 are at schools on the Department of Education's list of accredited institutions.

What a manufacturing technician does and how you become one: Manufacturing technician training across the US

See the 18 programs

How much does manufacturing training cost in Tennessee?

$925 to $4,008 is what most manufacturing programs in Tennessee cost if you pay yourself

That is the middle half of the 18 programs with a price. All of them: $510 to $6,865

Across the US, most cost $1,683 to $6,164.

In the typical program

Finished the program
80%
Working 6 months later
62%
Earned a year, estimated
about $24,300
Length
8 to 44 weeks
US: 26 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Tennessee. How these figures are made

What assemblers and fabricators earn in Tennessee

$44,630 typical pay a year in May 2025; most earn $37,640 to $56,780

Across the US: $44,650 a year.

Jobs now
about 58,760
Change to 2034
+7% US: no change
Openings a year
about 6,190

The BLS has no job line that matches this field exactly; this is the nearest it tracks. Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Tennessee labor market office, openings counting people who leave or change jobs2.

Is there free manufacturing training in Tennessee?

All 18 manufacturing programs in Tennessee approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

18 programs

How to pay for manufacturing training in Tennessee

WIOA funding can pay for manufacturing training in Tennessee

All 18 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for manufacturing training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 18 programs here are at schools on the Department of Education's accreditation list. Ask the school whether its program qualifies.78

GI Bill for manufacturing training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 18 programs the VA approves, so ask the school or the VA.9

Quick facts: Manufacturing technician training in Tennessee

programs with a price cost under $1,000
5 of 18
lowest typical price among the states with enough programs to compare
9th of 22
manufacturing programs here, against the typical state's 7
18 vs 7

The same figures as the manufacturing training by state table; prices only for states with three or more schools.

Do pricier manufacturing programs in Tennessee have better results?

It depends on what you count. The pricier half of manufacturing programs in Tennessee typically costs $5,492, about 11 times as much as the cheaper half's $510: the share working six months later came out higher, the share finishing lower. In the pricier half, 84% were working six months later, against 60%; 68% finished, against 85%; graduates earned about $24,600 a year, against about $24,300.

The pricier programs also run longer, typically 44 weeks against 8, so part of the price pays for more teaching.

Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.

How this is worked out: the 11 manufacturing programs here that report both a price and results, split at the middle price into two halves of 5. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.

Manufacturing technician training in Dyersburg, Nashville, Knoxville and other Tennessee cities

Choosing an area filters the program list above. 2 more programs are in 2 other areas, 2 in smaller cities and towns.

Other training in Tennessee

How manufacturing training compares with the rest of skilled trades: Trade school programs in Tennessee

Where the Tennessee manufacturing program numbers come from

The 18 manufacturing programs here are the ones Tennessee approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 14 schools run them, and 11 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about manufacturing training in Tennessee

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-2090 Miscellaneous Assemblers and Fabricators
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Miscellaneous Assemblers and Fabricators
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List