CNC machinist training in Minneapolis, Minnesota
16 CNC machinist programs with costs, results and funding that can make them free
5 schools offer these machinist programs with classes in the Minneapolis-St. Paul-Bloomington area, and every one is approved for workforce funding. Each shows its price if you pay yourself and how past students did.
Compared with CNC machinist training across Minnesota: the typical program here costs $7,218, 40% more than across Minnesota ($5,147); its graduates earned about $48,600 a year (estimated), 9% more than across Minnesota ($44,400); 62% finished, against 63% across Minnesota; the typical program takes 45 weeks, against 60 weeks across Minnesota.
In Minneapolis, all 16 programs ask for a high school diploma or equivalent.
By kind, the 16 programs here are machinist certificate or diploma (7 programs), short course or single class (4 programs), machinist (associate degree, 3 programs) and CNC or machine operator (2 programs). The cheapest kind here is short course or single class, at $2,752 for the middle one of 4 with a price; the most expensive is machinist (associate degree), at $11,866.
Of the 16 programs, 14 are taught in person and 2 hybrid. They run in 4 towns in the area; Brooklyn Park has the most with 5, then Anoka (5) and Minneapolis (4). All 16 are at schools on the Department of Education's list of accredited institutions.
What a CNC machinist does and how you become one: CNC machinist training across the US
See the 16 programsAll 46 CNC machinist programs in Minnesota, including online programs
How much does CNC machinist training cost in Minneapolis?
$2,752 to $10,620 is what most CNC machinist programs in Minneapolis cost if you pay yourself
That is the middle half of the 16 programs with a price. All of them: $1,452 to $54,400
Across Minnesota, most cost $2,849 to $10,023.
In the typical program
- Finished the program
- 62%
- Minnesota: 63%
- Working 6 months later
- 90%
- Minnesota: 86%
- Earned a year, estimated
- about $48,600
- Minnesota: about $44,400
- Length
- 30 to 120 weeks
- Minnesota: 60 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Minneapolis. How these figures are made
What CNC tool operators earn in the Minneapolis-St. Paul-Bloomington area
$57,850 typical pay a year in May 2025; most earn $47,880 to $63,150
Across Minnesota: $56,780 a year.
- Jobs now
- about 3,010
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1.
Which schools offer CNC machinist training in the Minneapolis-St. Paul-Bloomington area?
5 schools, 16 programs, most programs first. "Accredited school" means the school is on the Department of Education's list of accredited institutions; WIOA funding does not require it.
Anoka Technical College
Anoka
5 programs short course or single class, machinist certificate or diploma, machinist (associate degree)
$2,752 to $11,866 if you pay yourself
Accredited school
Hennepin Technical College
Brooklyn Park
5 programs short course or single class, machinist certificate or diploma, CNC or machine operator
$1,452 to $10,328 if you pay yourself
Accredited school
Dunwoody College of Technology
Minneapolis
2 programs machinist certificate or diploma, machinist (associate degree)
$14,619 to $54,400 if you pay yourself
Accredited school
Minneapolis Community and Technical College
Minneapolis
2 programs machinist (associate degree), machinist certificate or diploma
$9,594 to $10,234 if you pay yourself
Accredited school
Saint Paul College
St. Paul
2 programs CNC or machine operator, machinist certificate or diploma
$3,331 to $10,492 if you pay yourself
Accredited school
All 16 CNC machinist programs in Minneapolis approved for WIOA funding
Filters
16 programs
Machine Operator (Right Skills Now)
Saint Paul College
St. Paul
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,900Price if you pay yourself$3,331Program website, Machine Operator (Right Skills Now) at Saint Paul CollegeMore details about Machine Operator (Right Skills Now) at Saint Paul College
- Finished
- 69%
- Working at 6 months
- 84%
- Earned in a quarter
- $11,231
- Length
- 30 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 355
- Earned a year, estimated
- $44,900
- Price if you pay yourself
- $3,331
CNC Toolmaking
Saint Paul College
St. Paul
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,900Price if you pay yourself$10,492Program website, CNC Toolmaking at Saint Paul CollegeMore details about CNC Toolmaking at Saint Paul College
- Finished
- 69%
- Working at 6 months
- 84%
- Earned in a quarter
- $11,231
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- None listed
- Students counted
- 355
- Earned a year, estimated
- $44,900
- Price if you pay yourself
- $10,492
CNC Swiss Turning Center Technician
Hennepin Technical College
Brooklyn Park
Accredited school
High school diploma or equivalent
Earned a year, estimated$55,200Price if you pay yourself$1,452Program website, CNC Swiss Turning Center Technician at Hennepin Technical CollegeMore details about CNC Swiss Turning Center Technician at Hennepin Technical College
- Finished
- 62%
- Working at 6 months
- 89%
- Earned in a quarter
- $13,804
- Length
- 30 weeks, 9 hours a week
- Cost of supplies
- None listed
- Students counted
- 349
- Earned a year, estimated
- $55,200
- Price if you pay yourself
- $1,452
Computer Numerical Control (CNC) Setup Technician
Hennepin Technical College
Brooklyn Park
Accredited school
High school diploma or equivalent
Earned a year, estimated$55,200Price if you pay yourself$2,743Program website, Computer Numerical Control (CNC) Setup Technician at Hennepin Technical CollegeMore details about Computer Numerical Control (CNC) Setup Technician at Hennepin Technical College
- Finished
- 62%
- Working at 6 months
- 89%
- Earned in a quarter
- $13,804
- Length
- 30 weeks, 17 hours a week
- Cost of supplies
- None listed
- Students counted
- 349
- Earned a year, estimated
- $55,200
- Price if you pay yourself
- $2,743
Mazak CNC Technician
Hennepin Technical College
Brooklyn Park
Accredited school
High school diploma or equivalent
Earned a year, estimated$55,200Price if you pay yourself$3,228Program website, Mazak CNC Technician at Hennepin Technical CollegeMore details about Mazak CNC Technician at Hennepin Technical College
- Finished
- 62%
- Working at 6 months
- 89%
- Earned in a quarter
- $13,804
- Length
- 30 weeks, 20 hours a week
- Cost of supplies
- None listed
- Students counted
- 349
- Earned a year, estimated
- $55,200
- Price if you pay yourself
- $3,228
CNC Operator
Hennepin Technical College
Brooklyn Park
Accredited school
High school diploma or equivalent
Earned a year, estimated$55,200Price if you pay yourself$4,841Program website, CNC Operator at Hennepin Technical CollegeMore details about CNC Operator at Hennepin Technical College
- Finished
- 62%
- Working at 6 months
- 89%
- Earned in a quarter
- $13,804
- Length
- 60 weeks, 30 hours a week
- Cost of supplies
- None listed
- Students counted
- 349
- Earned a year, estimated
- $55,200
- Price if you pay yourself
- $4,841
Computer Numerical Control (CNC) Technician
Hennepin Technical College
Brooklyn Park
Accredited school
High school diploma or equivalent
Earned a year, estimated$55,200Price if you pay yourself$10,328Program website, Computer Numerical Control (CNC) Technician at Hennepin Technical CollegeMore details about Computer Numerical Control (CNC) Technician at Hennepin Technical College
- Finished
- 62%
- Working at 6 months
- 89%
- Earned in a quarter
- $13,804
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- None listed
- Students counted
- 349
Listed 2 times in the state's file with differing results. Shown: the listing with the most students.
- Earned a year, estimated
- $55,200
- Price if you pay yourself
- $10,328
Machine Technology 1
Anoka Technical College
Anoka
Accredited school
High school diploma or equivalent
Earned a year, estimated$32,000Price if you pay yourself$2,752Program website, Machine Technology 1 at Anoka Technical CollegeMore details about Machine Technology 1 at Anoka Technical College
- Finished
- 63%
- Working at 6 months
- 86%
- Earned in a quarter
- $8,006
- Length
- 30 weeks, 16 hours a week
- Cost of supplies
- None listed
- Students counted
- 255
- Earned a year, estimated
- $32,000
- Price if you pay yourself
- $2,752
Machine Technology 2
Anoka Technical College
Anoka
Accredited school
High school diploma or equivalent
Earned a year, estimated$32,000Price if you pay yourself$2,752Program website, Machine Technology 2 at Anoka Technical CollegeMore details about Machine Technology 2 at Anoka Technical College
- Finished
- 63%
- Working at 6 months
- 86%
- Earned in a quarter
- $8,006
- Length
- 30 weeks, 16 hours a week
- Cost of supplies
- None listed
- Students counted
- 255
- Earned a year, estimated
- $32,000
- Price if you pay yourself
- $2,752
Machine Technology 3
Anoka Technical College
Anoka
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,600Price if you pay yourself$2,752Program website, Machine Technology 3 at Anoka Technical CollegeMore details about Machine Technology 3 at Anoka Technical College
- Finished
- 56%
- Working at 6 months
- 92%
- Earned in a quarter
- $11,148
- Length
- 30 weeks, 16 hours a week
- Cost of supplies
- None listed
- Students counted
- 146
- Earned a year, estimated
- $44,600
- Price if you pay yourself
- $2,752
Advanced CNC Machine Technology
Anoka Technical College
Anoka
Accredited school
High school diploma or equivalent
Earned a year, estimated$44,600Price if you pay yourself$11,006Program website, Advanced CNC Machine Technology at Anoka Technical CollegeMore details about Advanced CNC Machine Technology at Anoka Technical College
- Finished
- 56%
- Working at 6 months
- 92%
- Earned in a quarter
- $11,148
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- None listed
- Students counted
- 146
- Earned a year, estimated
- $44,600
- Price if you pay yourself
- $11,006
CNC Design and Manufacturing Technology
Anoka Technical College
Anoka
Accredited school
High school diploma or equivalent
Earned a year, estimated$49,600Price if you pay yourself$11,866Program website, CNC Design and Manufacturing Technology at Anoka Technical CollegeMore details about CNC Design and Manufacturing Technology at Anoka Technical College
- Finished
- 35%
- Working at 6 months
- 87%
- Earned in a quarter
- $12,398
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- None listed
- Students counted
- 134
- Earned a year, estimated
- $49,600
- Price if you pay yourself
- $11,866
CNC Machinist Machine Tool
Minneapolis Community and Technical College
Minneapolis
Accredited school
High school diploma or equivalent
Earned a year, estimated$34,600Price if you pay yourself$9,594Program website, CNC Machinist Machine Tool at Minneapolis Community and Technical CollegeMore details about CNC Machinist Machine Tool at Minneapolis Community and Technical College
- Finished
- 40%
- Working at 6 months
- 82%
- Earned in a quarter
- $8,655
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- None listed
- Students counted
- 115
- Earned a year, estimated
- $34,600
- Price if you pay yourself
- $9,594
Right Skills Now for Manufacturing (CNC)
Dunwoody College of Technology
Minneapolis
Accredited school
High school diploma or equivalent
Earned a year, estimated$48,600Price if you pay yourself$14,619Program website, Right Skills Now for Manufacturing (CNC) at Dunwoody College of TechnologyMore details about Right Skills Now for Manufacturing (CNC) at Dunwoody College of Technology
- Finished
- 72%
- Working at 6 months
- 90%
- Earned in a quarter
- $12,139
- Length
- 30 weeks, 19 hours a week
- Cost of supplies
- $560
- Students counted
- 29
- Earned a year, estimated
- $48,600
- Price if you pay yourself
- $14,619
Machine Tool Technology
Dunwoody College of Technology
Minneapolis
Accredited school
High school diploma or equivalent
Earned a year, estimated$52,900Price if you pay yourself$54,400Program website, Machine Tool Technology at Dunwoody College of TechnologyMore details about Machine Tool Technology at Dunwoody College of Technology
- Finished
- 96%
- Working at 6 months
- 88%
- Earned in a quarter
- $13,224
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- $2,913
- Students counted
- 24
- Earned a year, estimated
- $52,900
- Price if you pay yourself
- $54,400
Machine Tool Technologies
Minneapolis Community and Technical College
Minneapolis
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$10,234Program website, Machine Tool Technologies at Minneapolis Community and Technical CollegeMore details about Machine Tool Technologies at Minneapolis Community and Technical College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 120 weeks, 50 hours a week
- Cost of supplies
- None listed
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $10,234
No programs match these filters.
How to pay for CNC machinist training in Minneapolis
WIOA funding can pay for CNC machinist training in Minneapolis
All 16 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Paid machinist apprenticeships
An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. None of the programs on this page is one.6
Financial aid and grants for CNC machinist training
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 16 programs here are at schools on the Department of Education's accreditation list. Ask the school whether its program qualifies.78
GI Bill for CNC machinist training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 16 programs the VA approves, so ask the school or the VA.9
Machinist apprenticeships in Minneapolis
A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.10
You apply to the employer or the program sponsor, not through a school.6 The Department of Labor's Apprenticeship Finder lists openings by place and job. None of the CNC machinist programs on this page is an apprenticeship.
Other training in Minneapolis
How CNC machinist training compares with the rest of skilled trades across Minnesota: Trade school programs in Minnesota
- CDL training14 programs
- CNA classes10 programs
- Welding classes19 programs
- HVAC training17 programs
- EMT classes15 programs
- Auto mechanic classes20 programs
- Cybersecurity training43 programs
- IT training108 programs
- Esthetician school10 programs
- Fire academy12 programs
- Police academy4 programs
- Culinary school14 programs
- Medical administrative assistant training20 programs
- Industrial maintenance technician training22 programs
- Coding and software development courses24 programs
- Data analytics courses31 programs
- Administrative assistant training21 programs
- AutoCAD and drafting courses27 programs
- Digital marketing courses12 programs
- Web and graphic design courses33 programs
- Manufacturing technician training13 programs
- Electronics technician training12 programs
- Business administration programs29 programs
- Auto body repair classes19 programs
- Accounting and bookkeeping classes35 programs
- RN programs17 programs
- Project management certification33 programs
Where the Minneapolis machinist program numbers come from
The 16 machinist programs here are the ones with classes in the Minneapolis-St. Paul-Bloomington area that Minnesota approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),11 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 5 schools run them, and 15 of them report how past students did. Online programs are left out here; they are on the Minnesota page. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
Sources for the facts about CNC machinist training in Minneapolis
Show the 11 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List