Retraining ReportJob training public funding can pay for

Find training

CNC machinist training in Kansas

10 CNC machinist programs with costs, results and funding that can make them free

In Kansas, 57% of students finished the typical program, against 71% across the US. But CNC machinist training costs less in Kansas than across the US: the typical program is $3,806, 21% below the national $4,845, the 11th-lowest of the 34 states with enough programs to compare.

The 10 programs are run by 6 schools; the largest runs 4.

More programs here take students without a high school diploma: 7 of 10, against 42% across the US.

By kind, the 10 programs here are machinist certificate or diploma (6 programs), machinist (associate degree, 2 programs), CNC or machine operator (1 program) and short course or single class (1 program).

Fewer of them can be taken online or hybrid than across the US: 1 of 10, against 32% nationwide. Wichita alone has 4 of the 10; the rest are spread over 4 other cities. Nearly all (9 of 10) are at schools on the Department of Education's list of accredited institutions.

What a CNC machinist does and how you become one: CNC machinist training across the US

See the 10 programs

How much does CNC machinist training cost in Kansas?

$2,198 to $5,669 is what most CNC machinist programs in Kansas cost if you pay yourself

That is the middle half of the 10 programs with a price. All of them: $1,029 to $12,694

Across the US, most cost $2,301 to $7,400.

In the typical program

Finished the program
57%
US: 71%
Working 6 months later
Not enough data
3 programs report it; a typical figure needs 5
Earned a year, estimated
Not enough data
2 programs report it; a typical figure needs 5
Length
Not reported
None of the 10 programs report it

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Kansas. How these figures are made

What CNC tool operators earn in Kansas

$48,400 typical pay a year in May 2025; most earn $44,040 to $58,320

Across the US: $50,690 a year.

Jobs now
about 2,540
Change to 2034
−8% US: −11%
Openings a year
about 180

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Kansas labor market office, openings counting people who leave or change jobs2.

Is there free CNC machinist training in Kansas?

All 10 CNC machinist programs in Kansas approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

10 programs

  • CNC or machine operatorIn personNo diploma needed

    CNC Operator

    WSU Tech

    Wichita

    Accredited school

    No diploma needed

    WSU Tech, WichitaCNC or machine operator · Accredited schoolIn person · No diploma needed

    Earned a year, estimated$56,000
    Price if you pay yourself$2,649

    6 students trained with WIOA funding

    School website, CNC Operator at WSU Tech
    More details about CNC Operator at WSU Tech
    Finished
    57%
    Working at 6 months
    89%
    Earned in a quarter
    $14,004
    Length
    Not reported
    Cost of supplies
    $628
    Students counted
    440
    Earned a year, estimated
    $56,000
    Price if you pay yourself
    $2,649
    students trained with WIOA funding
    6
    School website, CNC Operator at WSU Tech
  • Machinist (associate degree)In personNo diploma needed

    Machining Technology AAS

    WSU Tech

    Wichita

    Accredited school

    No diploma needed

    WSU Tech, WichitaMachinist (associate degree) · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$12,694

    4 students trained with WIOA funding

    School website, Machining Technology AAS at WSU Tech
    More details about Machining Technology AAS at WSU Tech
    Finished
    38%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $3,269
    Students counted
    351
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $12,694
    students trained with WIOA funding
    4
    School website, Machining Technology AAS at WSU Tech
  • Machinist (associate degree)In personNo diploma needed

    Machine & Tool Technology (Associate)

    Cowley College

    Arkansas City

    Accredited school

    No diploma needed

    Cowley College, Arkansas CityMachinist (associate degree) · Accredited schoolIn person · No diploma needed

    Earned a year, estimated$42,500
    Price if you pay yourself$1,029
    Program website, Machine & Tool Technology (Associate) at Cowley College
    More details about Machine & Tool Technology (Associate) at Cowley College
    Finished
    64%
    Working at 6 months
    68%
    Earned in a quarter
    $10,623
    Length
    Not reported
    Cost of supplies
    $865
    Students counted
    97
    Earned a year, estimated
    $42,500
    Price if you pay yourself
    $1,029
    Program website, Machine & Tool Technology (Associate) at Cowley College
  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Machining Technology Technical Certificate

    WSU Tech

    Wichita

    Accredited school

    High school diploma or equivalent

    WSU Tech, WichitaMachinist certificate or diploma · Accredited schoolIn person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$4,676
    School website, Machining Technology Technical Certificate at WSU Tech
    More details about Machining Technology Technical Certificate at WSU Tech
    Finished
    51%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $1,273
    Students counted
    75
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $4,676
    School website, Machining Technology Technical Certificate at WSU Tech
  • Machinist certificate or diplomaIn personEducation and courses

    Machine Technology

    KCKCC Technical Education Center

    Kansas City

    Accredited school

    Education and courses

    KCKCC Technical Education Center, Kansas CityMachinist certificate or diploma · Accredited schoolIn person · Education and courses

    Earned a year, estimatedNot reported
    Price if you pay yourself$6,719
    Program website, Machine Technology at KCKCC Technical Education Center
    More details about Machine Technology at KCKCC Technical Education Center
    Finished
    26%
    Working at 6 months
    100%
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    None listed
    Students counted
    38
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $6,719
    Program website, Machine Technology at KCKCC Technical Education Center
  • Machinist certificate or diplomaIn personNo diploma needed

    Manual Machining Technical Certificate

    WSU Tech

    Wichita

    Accredited school

    No diploma needed

    WSU Tech, WichitaMachinist certificate or diploma · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,937
    School website, Manual Machining Technical Certificate at WSU Tech
    More details about Manual Machining Technical Certificate at WSU Tech
    Finished
    65%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $916
    Students counted
    33
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $2,937
    School website, Manual Machining Technical Certificate at WSU Tech
  • Machinist certificate or diplomaOnlineNo diploma needed

    Machine/Tool Technology (23 credit hour program)

    Washburn Institute of Technology

    Based in Topeka, KS

    Accredited school

    No diploma needed

    Washburn Institute of Technology, based in Topeka, KSMachinist certificate or diploma · Accredited schoolOnline · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$4,932
    More details about Machine/Tool Technology (23 credit hour program) at Washburn Institute of Technology
    Finished
    94%
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $1,383
    Students counted
    16
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $4,932
  • Machinist certificate or diplomaIn personNo diploma needed

    Machine & Tool Technology (Certificate)

    Cowley College

    Arkansas City

    Accredited school

    No diploma needed

    Cowley College, Arkansas CityMachinist certificate or diploma · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,029
    Program website, Machine & Tool Technology (Certificate) at Cowley College
    More details about Machine & Tool Technology (Certificate) at Cowley College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $865
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,029
    Program website, Machine & Tool Technology (Certificate) at Cowley College
  • Short course or single classIn personHigh school diploma or equivalent

    Machine Shop Safety & Fundamentals

    Dwayne Peaslee Technical Training Center

    Lawrence

    High school diploma or equivalent

    Dwayne Peaslee Technical Training Center, LawrenceShort course or single classIn person · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,048
    Program website, Machine Shop Safety & Fundamentals at Dwayne Peaslee Technical Training Center
    More details about Machine Shop Safety & Fundamentals at Dwayne Peaslee Technical Training Center
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $2,048
    Program website, Machine Shop Safety & Fundamentals at Dwayne Peaslee Technical Training Center
  • Machinist certificate or diplomaIn personNo diploma needed

    Machining & Manufacturing Technology- Coffeyville

    Coffeyville Community College

    Coffeyville

    Accredited school

    No diploma needed

    Coffeyville Community College, CoffeyvilleMachinist certificate or diploma · Accredited schoolIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$5,915
    School website, Machining & Manufacturing Technology- Coffeyville at Coffeyville Community College
    More details about Machining & Manufacturing Technology- Coffeyville at Coffeyville Community College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $70
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $5,915
    School website, Machining & Manufacturing Technology- Coffeyville at Coffeyville Community College

How to pay for CNC machinist training in Kansas

WIOA funding can pay for CNC machinist training in Kansas

All 10 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Paid machinist apprenticeships

An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. None of the programs on this page is one.7

Financial aid and grants for CNC machinist training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 9 of the 10 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Ask the school whether its program qualifies.89

GI Bill for CNC machinist training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 10 programs the VA approves, so ask the school or the VA.10

Quick facts: CNC machinist training in Kansas

lowest typical price among the states with enough programs to compare
11th of 34
CNC machinist programs here, against the typical state's 12
10 vs 12

The same figures as the CNC machinist training by state table; prices only for states with three or more schools.

Machinist apprenticeships in Kansas

A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.11

You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. None of the CNC machinist programs on this page is an apprenticeship.

CNC machinist training in Wichita, Arkansas City, Kansas City and other Kansas cities

Choosing an area filters the program list above. 1 in smaller cities and towns and 1 online.

Other training in Kansas

How CNC machinist training compares with the rest of skilled trades: Trade school programs in Kansas

Where the Kansas machinist program numbers come from

The 10 machinist programs here are the ones Kansas approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 6 schools run them, and 7 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about CNC machinist training in Kansas

Show the 12 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Computer Numerically Controlled Tool Operators
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
  8. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  9. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  10. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  11. US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
  12. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List