Retraining ReportJob training public funding can pay for

Find training

CNC machinist training in Indiana

55 CNC machinist programs with costs, results and funding that can make them free

Programs here run longer: typically 52 weeks, against 32 weeks nationally. And in Indiana, 76% of students finished the typical program, against 71% across the US. The rest sits close to the national figures: graduates earned about $42,100 a year and 81% were working six months later.

Indiana has approved all 55 for workforce funding. One school runs 37 of these 55 programs, so the typical figures lean heavily on its prices and results.

As across the US, about 36% of the programs here take students without a high school diploma; the rest ask for one or for earlier courses.

By kind, the 55 programs here are machinist certificate or diploma (22 programs), CNC or machine operator (14 programs), machinist (associate degree, 12 programs), short course or single class (5 programs), and 2 more of one other kind. The cheapest kind here is short course or single class, at $1,699 for the middle one of 5 with a price; the most expensive is machinist (associate degree), at $9,633.

Fewer of them can be taken online or hybrid than across the US: 8 of 55, against 32% nationwide. They're spread over 28 cities, none with more than 3.

What a CNC machinist does and how you become one: CNC machinist training across the US

See the 55 programs

How much does CNC machinist training cost in Indiana?

Certificates and short courses (43 programs)
$2,745 to $4,912most of them, usually 9 to 52 weeks long
Two-year degrees (12 programs)
$9,633most of them, usually 104 weeks long

What you pay yourself for the whole program, as the schools report it. "Most" is the middle half of the programs with a price.

In the typical program

Finished the program
76%
US: 71%
Working 6 months later
81%
US: 80%
Earned a year, estimated
about $42,100
US: about $40,700
Length
11 to 78 weeks
US: 32 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Indiana. How these figures are made

What CNC tool operators earn in Indiana

$48,590 typical pay a year in May 2025; most earn $43,570 to $59,100

Across the US: $50,690 a year.

Jobs now
about 9,690
Change to 2034
−9% US: −11%
Openings a year
about 630

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Indiana labor market office, openings counting people who leave or change jobs2.

Is there free CNC machinist training in Indiana?

All 55 CNC machinist programs in Indiana approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

55 programs

How to pay for CNC machinist training in Indiana

WIOA funding can pay for CNC machinist training in Indiana

All 55 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Paid machinist apprenticeships

An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. 2 of the programs on this page are apprenticeships.7

Financial aid and grants for CNC machinist training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 39 of the 55 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Check with the school before you count on it.89

GI Bill for CNC machinist training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 55 programs the VA approves, so ask the school or the VA.10

Quick facts: CNC machinist training in Indiana

programs with a price cost under $3,000
15 of 55
lowest typical price among the states with enough programs to compare
17th of 34
other states where the typical program's graduates earned less
9 of 15
CNC machinist programs here, against the typical state's 12
55 vs 12

The same figures as the CNC machinist training by state table; prices only for states with three or more schools.

Do pricier CNC machinist programs in Indiana have better results?

It depends on what you count. The pricier half of CNC machinist programs in Indiana typically costs $4,912, $2,002 more than the cheaper half's $2,910: the share working six months later and earnings came out higher, the share finishing lower. In the pricier half, graduates earned about $41,600 a year, against about $33,600; 84% were working six months later, against 73%; 80% finished, against 83%.

The pricier programs also run longer, typically 52 weeks against 10, so part of the price pays for more teaching.

Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.

How this is worked out: the 14 certificates and short courses here that report both a price and results, split at the middle price into two halves of 7; degrees are left out. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.

Machinist apprenticeships in Indiana

A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.11

You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. This page lists 2 machinist apprenticeships approved for WIOA funding in Indiana. Ask what you'll pay for the classes and what you'll earn on the job.

CNC machinist training in Chicago, Fort Wayne, Indianapolis and other Indiana cities

Choosing an area filters the program list above. 24 more programs are in 16 other areas, 4 in smaller cities and towns and 7 online.

Other training in Indiana

How CNC machinist training compares with the rest of skilled trades: Trade school programs in Indiana

Where the Indiana machinist program numbers come from

The 55 machinist programs here are the ones Indiana approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 10 schools run them, and 23 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about CNC machinist training in Indiana

Show the 12 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Computer Numerically Controlled Tool Operators
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
  8. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  9. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  10. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  11. US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
  12. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List