Aircraft mechanic school in North Carolina
6 aircraft mechanic programs with costs, results and funding that can make them free
Aircraft mechanic school costs less in North Carolina than across the US: the typical program is $3,989, 56% below the national $9,000, the 3rd-lowest of the 13 states with enough programs to compare. And programs here run shorter: typically 34 weeks, against 48 weeks nationally.
North Carolina has approved all 6 for workforce funding. One school runs 3 of these 6 programs, so the typical figures lean heavily on its prices and results.
In North Carolina, 1 of the 6 programs takes students without a high school diploma and 5 ask for a diploma or equivalent.
By kind, the 6 programs here are aircraft structures and assembly (2 programs), airframe or powerplant only (2 programs), aviation maintenance (associate degree, 1 program) and FAA exam prep or short course (1 program).
Elizabeth City alone has 3 of the 6; the rest are spread over 2 other cities. All 6 are at schools on the Department of Education's list of accredited institutions.
What an aircraft mechanic does and how you become one: Aircraft mechanic school across the US
See the 6 programsHow much does aircraft mechanic school cost in North Carolina?
$1,157 to $6,543 is what most aircraft mechanic programs in North Carolina cost if you pay yourself
That is the middle half of the 6 programs with a price. All of them: $188 to $8,730
Across the US, most cost $4,474 to $14,385.
In the typical program
- Finished the program
- Not enough data
- 3 programs report it; a typical figure needs 5
- Working 6 months later
- Not enough data
- 3 programs report it; a typical figure needs 5
- Earned a year, estimated
- Not enough data
- 3 programs report it; a typical figure needs 5
- Length
- 9 to 62 weeks
- US: 48 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in North Carolina. How these figures are made
What aircraft mechanics and service technicians earn in North Carolina
$76,980 typical pay a year in May 2025; most earn $62,720 to $93,670
Across the US: $79,870 a year.
- Jobs now
- about 4,700
- Change to 2034
- +4% US: +4%
- Openings a year
- about 450
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the North Carolina labor market office, openings counting people who leave or change jobs2.
All 6 aircraft mechanic programs in North Carolina approved for WIOA funding
Filters
6 programs
Aviation Systems Technology
College of the Albemarle
Elizabeth City
Accredited school
High school diploma or equivalent
Earned a year, estimated$27,700Price if you pay yourself$7,394Program website, Aviation Systems Technology at College of the AlbemarleMore details about Aviation Systems Technology at College of the Albemarle
- Finished
- 37%
- Working at 6 months
- 59%
- Earned in a quarter
- $6,933
- Length
- 84 weeks, 31 hours a week
- Cost of supplies
- $300
- Students counted
- 84
- Earned a year, estimated
- $27,700
- Price if you pay yourself
- $7,394
Aviation: Structures Assembly
Guilford Technical Community College
High Point
Accredited school
No diploma needed
Earned a year, estimated$30,000Price if you pay yourself$1888 students trained with WIOA funding
Program website, Aviation: Structures Assembly at Guilford Technical Community CollegeMore details about Aviation: Structures Assembly at Guilford Technical Community College
- Finished
- 84%
- Working at 6 months
- 78%
- Earned in a quarter
- $7,512
- Length
- 5 weeks, 32 hours a week
- Cost of supplies
- None listed
- Students counted
- 21
- Earned a year, estimated
- $30,000
- Price if you pay yourself
- $188
- students trained with WIOA funding
- 8
Aviation Manufacturing: Introduction to Structures
Guilford Technical Community College
High Point
Accredited school
High school diploma or equivalent
Earned a year, estimated$27,500Price if you pay yourself$2137 students trained with WIOA funding
Program website, Aviation Manufacturing: Introduction to Structures at Guilford Technical Community CollegeMore details about Aviation Manufacturing: Introduction to Structures at Guilford Technical Community College
- Finished
- 100%
- Working at 6 months
- 88%
- Earned in a quarter
- $6,878
- Length
- 9 weeks, 5 hours a week
- Cost of supplies
- None listed
- Students counted
- 21
- Earned a year, estimated
- $27,500
- Price if you pay yourself
- $213
- students trained with WIOA funding
- 7
Airframe Maintenance Diploma
College of the Albemarle
Elizabeth City
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$3,989Program website, Airframe Maintenance Diploma at College of the AlbemarleMore details about Airframe Maintenance Diploma at College of the Albemarle
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 58 weeks, 12 hours a week
- Cost of supplies
- $300
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,989
Powerplant Maintenance - Diploma
College of the Albemarle
Elizabeth City
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$3,989Program website, Powerplant Maintenance - Diploma at College of the AlbemarleMore details about Powerplant Maintenance - Diploma at College of the Albemarle
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 64 weeks, 12 hours a week
- Cost of supplies
- $300
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,989
Aviation Maintenance Technology program Part 65
Embry Riddle Aeronautical University
Daytona Beach, FL
Accredited school
High school diploma or equivalent
Classes are outside North Carolina; North Carolina approved the program for its funding.
Earned a year, estimatedNot reportedPrice if you pay yourself$8,730Program website, Aviation Maintenance Technology program Part 65 at Embry Riddle Aeronautical UniversityMore details about Aviation Maintenance Technology program Part 65 at Embry Riddle Aeronautical University
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 9 weeks, 23 hours a week
- Cost of supplies
- $1,085
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $8,730
No programs match these filters.
How to pay for aircraft mechanic school in North Carolina
WIOA funding can pay for aircraft mechanic school in North Carolina
All 6 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Financial aid and grants for aircraft mechanic school
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 6 programs here are at schools on the Department of Education's accreditation list. The school can tell you whether its program qualifies.78
GI Bill for aircraft mechanic school
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 6 programs the VA approves, so ask the school or the VA.9
Quick facts: Aircraft mechanic school in North Carolina
- lowest typical price among the states with enough programs to compare
- 3rd of 13
- aircraft mechanic programs here, against the typical state's 5
- 6 vs 5
The same figures as the aircraft mechanic school by state table; prices only for states with three or more schools.
Aircraft mechanic school in Greensboro, Deltona and other North Carolina cities
Choosing an area filters the program list above. 3 in smaller cities and towns.
Other training in North Carolina
How aircraft mechanic school compares with the rest of transportation and logistics: Transportation and logistics training in North Carolina
- CDL training90 programs
- CNA classes113 programs
- Medical assistant training75 programs
- Phlebotomy training64 programs
- Welding classes89 programs
- HVAC training65 programs
- Medical billing and coding training58 programs
- LPN programs34 programs
- EMT classes66 programs
- Electrician training43 programs
- Dental assistant programs36 programs
- Auto mechanic classes33 programs
- Pharmacy technician training51 programs
- Plumbing school10 programs
- CNC machinist training33 programs
- Carpentry classes6 programs
- Heavy equipment operator training4 programs
- Diesel mechanic training8 programs
- Cybersecurity training33 programs
- IT training110 programs
- Cosmetology school16 programs
- Barber school7 programs
- Esthetician school11 programs
- Nail tech school6 programs
- EKG technician programs25 programs
- Massage therapy school10 programs
- Paralegal programs17 programs
- Fire academy8 programs
- Police academy37 programs
- Surgical tech programs21 programs
- Radiology tech programs15 programs
- Culinary school13 programs
- Home health aide training1 program
- PTA programs9 programs
- Medical administrative assistant training58 programs
- Human resources training22 programs
- Medication aide training33 programs
- Industrial maintenance technician training19 programs
- Early childhood education programs57 programs
- Supply chain and logistics training15 programs
- Hospitality management programs7 programs
- Addiction counselor training7 programs
- Coding and software development courses20 programs
- Lineman school13 programs
- Sterile processing technician training15 programs
- Sonography school13 programs
- Data analytics courses17 programs
- Administrative assistant training21 programs
- Respiratory therapy programs11 programs
- Medical lab technician programs13 programs
- AutoCAD and drafting courses5 programs
- Digital marketing courses5 programs
- Web and graphic design courses10 programs
- Health information technology programs12 programs
- Vet tech programs12 programs
- Real estate school1 program
- Patient care technician training3 programs
- OTA programs5 programs
- Interpreter and translator training5 programs
- Home inspector training2 programs
- Forklift certification13 programs
- Personal trainer certification6 programs
- Healthcare administration programs9 programs
- Customer service training2 programs
- MRI tech school4 programs
- RBT certification training2 programs
- Mental health technician training2 programs
- Human services programs34 programs
- Manufacturing technician training11 programs
- Electronics technician training17 programs
- Business administration programs55 programs
- Criminal justice programs31 programs
- Teacher assistant certification3 programs
- Auto body repair classes11 programs
- Sleep technician training3 programs
- Solar and wind technician training4 programs
- Water treatment operator training2 programs
- Dialysis technician training4 programs
- Optician training7 programs
- Masonry training5 programs
- Construction training programs24 programs
- Dental hygiene programs8 programs
- Accounting and bookkeeping classes29 programs
- RN programs71 programs
- Project management certification29 programs
Where the North Carolina aviation maintenance program numbers come from
The 6 aviation maintenance programs here are the ones North Carolina approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 3 schools run them, and 3 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
Sources for the facts about aircraft mechanic school in North Carolina
Show the 10 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 49-3011 Aircraft Mechanics and Service Technicians
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Aircraft Mechanics and Service Technicians
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List