Retraining ReportJob training public funding can pay for

Find training

HVAC training in North Carolina

65 HVAC training programs with costs, results and funding that can make them free

In North Carolina, 62% of students finished the typical program, against 75% across the US. The rest sits close to the national figures: graduates earned about $38,000 a year and 71% were working six months later.

No school dominates: 41 schools run the 65 programs, none more than 4.

Fewer programs here take students without a high school diploma: 15 of 65, against 35% across the US.

By kind, the 65 programs here are HVAC technician (50 programs), HVAC (associate degree, 14 programs) and refrigeration (1 program). The cheapest kind here is HVAC technician, at $2,511 for the middle one of 50 with a price; the most expensive is HVAC (associate degree), at $5,475.

They're spread over 37 cities, none with more than 4. Nearly all (62 of 65) are at schools on the Department of Education's list of accredited institutions.

What an HVAC technician does and how you become one: HVAC training across the US

See the 65 programs

How much does HVAC training cost in North Carolina?

Certificates and short courses (51 programs)
$226 to $3,540most of them, usually 16 to 48 weeks long
Two-year degrees (14 programs)
$4,898 to $6,060most of them, usually 72 to 80 weeks long

What you pay yourself for the whole program, as the schools report it. "Most" is the middle half of the programs with a price.

In the typical program

Finished the program
62%
US: 75%
Working 6 months later
71%
US: 74%
Earned a year, estimated
about $38,000
US: about $37,800
Length
18 to 64 weeks
US: 36 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in North Carolina. How these figures are made

What HVAC mechanics and installers earn in North Carolina

$57,260 typical pay a year in May 2025; most earn $46,830 to $64,310

Across the US: $61,010 a year.

Jobs now
about 15,230
Change to 2034
+9% US: +8%
Openings a year
about 1,400

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the North Carolina labor market office, openings counting people who leave or change jobs2.

Is there free HVAC training in North Carolina?

All 65 HVAC training programs in North Carolina approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

65 programs

How to pay for HVAC training in North Carolina

WIOA funding can pay for HVAC training in North Carolina

All 65 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for HVAC training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 62 of the 65 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Ask the school whether its program qualifies.78

GI Bill for HVAC training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 65 programs the VA approves, so ask the school or the VA.9

Quick facts: HVAC training in North Carolina

programs with a price cost under $1,000
19 of 65
lowest typical price among the states with enough programs to compare
4th of 38
other states where the typical program's graduates earned less
12 of 22
HVAC training programs here, against the typical state's 15
65 vs 15

The same figures as the HVAC training by state table; prices only for states with three or more schools.

Do pricier HVAC training programs in North Carolina have better results?

It depends on what you count. The pricier half of HVAC training programs in North Carolina typically costs $3,457, about 19 times as much as the cheaper half's $180: the share working six months later came out higher, the share finishing lower. In the pricier half, 46% finished, against 79%; 73% were working six months later, against 58%; graduates earned about $37,400 a year, against about $37,400.

The pricier programs also run longer, typically 45 weeks against 16, so part of the price pays for more teaching. Online or hybrid teaching is more common among the pricier programs (7 against 0).

Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.

How this is worked out: the 33 certificates and short courses here that report both a price and results, split at the middle price into two halves of 16; degrees are left out. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.

HVAC training in Winston-Salem, Burlington, Raleigh and other North Carolina cities

Choosing an area filters the program list above. 25 more programs are in 16 other areas, 14 in smaller cities and towns and 3 online.

Other training in North Carolina

How HVAC training compares with the rest of skilled trades: Trade school programs in North Carolina

Where the North Carolina HVAC program numbers come from

The 65 HVAC programs here are the ones North Carolina approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 41 schools run them, and 43 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about HVAC training in North Carolina

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 49-9021 Heating, Air Conditioning, and Refrigeration Mechanics and Installers
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Heating, Air Conditioning, and Refrigeration Mechanics and Installers
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List