CNC machinist training in Colorado
19 CNC machinist programs with costs, results and funding that can make them free
In Colorado, 33% of students finished the typical program, against 71% across the US. And in Colorado, 45% were working six months after leaving, against 80% across the US. Also, graduates of the typical program earned about $31,400 a year (estimated), 23% less than across the US, the lowest of the 16 states with enough programs to compare.
Colorado has approved all 19 for workforce funding. One school runs 8 of these 19 programs, so the typical figures lean heavily on its prices and results.
More programs here take students without a high school diploma: 15 of 19, against 42% across the US.
By kind, the 19 programs here are short course or single class (14 programs) and machinist certificate or diploma (5 programs). The cheapest kind here is short course or single class, at $5,394 for the middle one of 14 with a price; the most expensive is machinist certificate or diploma, at $9,206.
More of them can be taken online or hybrid than across the US: 11 of 19, against 32% nationwide. Pueblo alone has 8 of the 19; the rest are spread over 4 other cities. All 19 are at schools on the Department of Education's list of accredited institutions.
What a CNC machinist does and how you become one: CNC machinist training across the US
See the 19 programsHow much does CNC machinist training cost in Colorado?
$3,087 to $9,412 is what most CNC machinist programs in Colorado cost if you pay yourself
That is the middle half of the 19 programs with a price. All of them: $1,892 to $17,635
Across the US, most cost $2,301 to $7,400.
In the typical program
- Finished the program
- 33%
- US: 71%
- Working 6 months later
- 45%
- US: 80%
- Earned a year, estimated
- about $31,400
- US: about $40,700
- Length
- Left out
- The 14 figures filed fail our checks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Colorado. How these figures are made
What CNC tool operators earn in Colorado
$55,270 typical pay a year in May 2025; most earn $47,610 to $64,030
Across the US: $50,690 a year.
- Jobs now
- about 1,580
- Change to 2034
- −12% US: −11%
- Openings a year
- about 90
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Colorado labor market office, openings counting people who leave or change jobs2.
All 19 CNC machinist programs in Colorado approved for WIOA funding
Filters
19 programs
Precision Machining
Red Rocks Community College
Lakewood
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$10,062School website, Precision Machining at Red Rocks Community CollegeMore details about Precision Machining at Red Rocks Community College
- Finished
- 20%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Left out
- Cost of supplies
- $1,650
- Students counted
- 90
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $10,062
Machining Technology 3
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimated$36,400Price if you pay yourself$17,635Program website, Machining Technology 3 at Pueblo Community CollegeMore details about Machining Technology 3 at Pueblo Community College
- Finished
- 53%
- Working at 6 months
- 53%
- Earned in a quarter
- $9,112
- Length
- Left out
- Cost of supplies
- $3,800
- Students counted
- 70
- Earned a year, estimated
- $36,400
- Price if you pay yourself
- $17,635
Precision/Computer Aided Machining
Front Range Community College
Westminster
Accredited school
No diploma needed
Earned a year, estimated$39,800Price if you pay yourself$5,783Program website, Precision/Computer Aided Machining at Front Range Community CollegeMore details about Precision/Computer Aided Machining at Front Range Community College
- Finished
- 50%
- Working at 6 months
- 75%
- Earned in a quarter
- $9,943
- Length
- Left out
- Cost of supplies
- $2,190
- Students counted
- 53
Listed 3 times in the state's file with differing results. Shown: the listing with the most students.
- Earned a year, estimated
- $39,800
- Price if you pay yourself
- $5,783
Machining Technology 7
Pikes Peak State College
Colorado Springs
Accredited school
No diploma needed
Earned a year, estimated$24,500Price if you pay yourself$9,412School website, Machining Technology 7 at Pikes Peak State CollegeMore details about Machining Technology 7 at Pikes Peak State College
- Finished
- 24%
- Working at 6 months
- 46%
- Earned in a quarter
- $6,132
- Length
- Left out
- Cost of supplies
- $3,600
- Students counted
- 50
- Earned a year, estimated
- $24,500
- Price if you pay yourself
- $9,412
Machining Technology 4
Pikes Peak State College
Colorado Springs
Accredited school
No diploma needed
Earned a year, estimated$47,600Price if you pay yourself$9,412School website, Machining Technology 4 at Pikes Peak State CollegeMore details about Machining Technology 4 at Pikes Peak State College
- Finished
- 21%
- Working at 6 months
- 44%
- Earned in a quarter
- $11,907
- Length
- Left out
- Cost of supplies
- $3,600
- Students counted
- 33
- Earned a year, estimated
- $47,600
- Price if you pay yourself
- $9,412
Machining Technology 6
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimated$31,400Price if you pay yourself$3,087Program website, Machining Technology 6 at Pueblo Community CollegeMore details about Machining Technology 6 at Pueblo Community College
- Finished
- 67%
- Working at 6 months
- 41%
- Earned in a quarter
- $7,855
- Length
- Not reported
- Cost of supplies
- $414
- Students counted
- 28
- Earned a year, estimated
- $31,400
- Price if you pay yourself
- $3,087
Machining Technology 7
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimated$31,400Price if you pay yourself$3,087Program website, Machining Technology 7 at Pueblo Community CollegeMore details about Machining Technology 7 at Pueblo Community College
- Finished
- 67%
- Working at 6 months
- 41%
- Earned in a quarter
- $7,855
- Length
- Not reported
- Cost of supplies
- $414
- Students counted
- 28
- Earned a year, estimated
- $31,400
- Price if you pay yourself
- $3,087
Machining Technology 5
Pikes Peak State College
Colorado Springs
Accredited school
No diploma needed
Earned a year, estimated$43,800Price if you pay yourself$5,394Program website, Machining Technology 5 at Pikes Peak State CollegeMore details about Machining Technology 5 at Pikes Peak State College
- Finished
- 22%
- Working at 6 months
- 33%
- Earned in a quarter
- $10,944
- Length
- Left out
- Cost of supplies
- $2,126
- Students counted
- 22
- Earned a year, estimated
- $43,800
- Price if you pay yourself
- $5,394
General Machining Certificate
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimated$27,500Price if you pay yourself$10,800Program website, General Machining Certificate at Pueblo Community CollegeMore details about General Machining Certificate at Pueblo Community College
- Finished
- 38%
- Working at 6 months
- 46%
- Earned in a quarter
- $6,871
- Length
- Left out
- Cost of supplies
- $3,600
- Students counted
- 13
- Earned a year, estimated
- $27,500
- Price if you pay yourself
- $10,800
Machine Technologies
Community College of Denver
Denver
Accredited school
No diploma needed
Earned a year, estimated$19,400Price if you pay yourself$9,206Program website, Machine Technologies at Community College of DenverMore details about Machine Technologies at Community College of Denver
- Finished
- Not reported
- Working at 6 months
- 75%
- Earned in a quarter
- $4,853
- Length
- Left out
- Cost of supplies
- $300
- Students counted
- 12
- Earned a year, estimated
- $19,400
- Price if you pay yourself
- $9,206
Machining Technology 1
Pikes Peak State College
Colorado Springs
Accredited school
No diploma needed
Earned a year, estimated$25,800Price if you pay yourself$4,541Program website, Machining Technology 1 at Pikes Peak State CollegeMore details about Machining Technology 1 at Pikes Peak State College
- Finished
- 27%
- Working at 6 months
- 36%
- Earned in a quarter
- $6,447
- Length
- Left out
- Cost of supplies
- $1,126
- Students counted
- 10
- Earned a year, estimated
- $25,800
- Price if you pay yourself
- $4,541
Machining Technology 1
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,980Program website, Machining Technology 1 at Pueblo Community CollegeMore details about Machining Technology 1 at Pueblo Community College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Left out
- Cost of supplies
- $500
- Students counted
- 14
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,980
Machining Technology 2
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,892Program website, Machining Technology 2 at Pueblo Community CollegeMore details about Machining Technology 2 at Pueblo Community College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Not reported
- Cost of supplies
- $233
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,892
Machining Technology 4
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,405Program website, Machining Technology 4 at Pueblo Community CollegeMore details about Machining Technology 4 at Pueblo Community College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Not reported
- Cost of supplies
- $68
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,405
Machining Technology 5
Pueblo Community College
Pueblo
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$2,405Program website, Machining Technology 5 at Pueblo Community CollegeMore details about Machining Technology 5 at Pueblo Community College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Not reported
- Cost of supplies
- $68
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $2,405
MACHINE TECHNOLOGIES: Basic Machining
Community College of Denver
Denver
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$3,361Program website, MACHINE TECHNOLOGIES: Basic Machining at Community College of DenverMore details about MACHINE TECHNOLOGIES: Basic Machining at Community College of Denver
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Left out
- Cost of supplies
- $400
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,361
Machining Technology 3
Pikes Peak State College
Colorado Springs
Accredited school
Education and courses
Earned a year, estimatedNot reportedPrice if you pay yourself$5,946Program website, Machining Technology 3 at Pikes Peak State CollegeMore details about Machining Technology 3 at Pikes Peak State College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Left out
- Cost of supplies
- $2,165
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $5,946
Machining Technology 6
Pikes Peak State College
Colorado Springs
Accredited school
Education and courses
Earned a year, estimatedNot reportedPrice if you pay yourself$6,774Program website, Machining Technology 6 at Pikes Peak State CollegeMore details about Machining Technology 6 at Pikes Peak State College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Left out
- Cost of supplies
- $2,188
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,774
Machining Technology 2
Pikes Peak State College
Colorado Springs
Accredited school
Education and courses
Earned a year, estimatedNot reportedPrice if you pay yourself$11,955Program website, Machining Technology 2 at Pikes Peak State CollegeMore details about Machining Technology 2 at Pikes Peak State College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Left out
- Cost of supplies
- $3,338
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $11,955
No programs match these filters.
How to pay for CNC machinist training in Colorado
WIOA funding can pay for CNC machinist training in Colorado
All 19 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Paid machinist apprenticeships
An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. None of the programs on this page is one.7
Financial aid and grants for CNC machinist training
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 19 programs here are at schools on the Department of Education's accreditation list. Ask the school whether its program qualifies.89
GI Bill for CNC machinist training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 19 programs the VA approves, so ask the school or the VA.10
Quick facts: CNC machinist training in Colorado
- programs with a price cost under $3,000
- 4 of 19
- lowest typical price among the states with enough programs to compare
- 24th of 34
- other states where the typical program's graduates earned less
- 0 of 15
- CNC machinist programs here, against the typical state's 12
- 19 vs 12
The same figures as the CNC machinist training by state table; prices only for states with three or more schools.
Machinist apprenticeships in Colorado
A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.11
You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. None of the CNC machinist programs on this page is an apprenticeship.
CNC machinist training in Pueblo, Colorado Springs, Denver and other Colorado cities
Choosing an area filters the program list above.
Other training in Colorado
How CNC machinist training compares with the rest of skilled trades: Trade school programs in Colorado
- CDL training32 programs
- CNA classes21 programs
- Medical assistant training26 programs
- Phlebotomy training13 programs
- Welding classes36 programs
- HVAC training5 programs
- Medical billing and coding training25 programs
- LPN programs4 programs
- EMT classes39 programs
- Electrician training7 programs
- Dental assistant programs16 programs
- Auto mechanic classes47 programs
- Pharmacy technician training13 programs
- Plumbing school2 programs
- Heavy equipment operator training3 programs
- Diesel mechanic training10 programs
- Cybersecurity training34 programs
- IT training93 programs
- Cosmetology school4 programs
- Barber school4 programs
- Esthetician school5 programs
- Nail tech school3 programs
- EKG technician programs1 program
- Massage therapy school6 programs
- Paralegal programs16 programs
- Fire academy32 programs
- Police academy9 programs
- Surgical tech programs5 programs
- Radiology tech programs9 programs
- Culinary school28 programs
- PTA programs4 programs
- Medical administrative assistant training14 programs
- Human resources training2 programs
- Industrial maintenance technician training9 programs
- Early childhood education programs53 programs
- Aircraft mechanic school1 program
- Hospitality management programs17 programs
- Addiction counselor training8 programs
- Community health worker training1 program
- Coding and software development courses29 programs
- Lineman school6 programs
- Sterile processing technician training3 programs
- Sonography school5 programs
- Data analytics courses22 programs
- Administrative assistant training33 programs
- Respiratory therapy programs4 programs
- Medical lab technician programs4 programs
- AutoCAD and drafting courses23 programs
- Digital marketing courses9 programs
- Web and graphic design courses58 programs
- Health information technology programs8 programs
- Vet tech programs10 programs
- Real estate school5 programs
- Patient care technician training1 program
- OTA programs1 program
- Crane operator training2 programs
- Interpreter and translator training2 programs
- Healthcare administration programs2 programs
- Customer service training2 programs
- Flight school1 program
- RBT certification training2 programs
- Mental health technician training1 program
- Human services programs6 programs
- Manufacturing technician training11 programs
- Electronics technician training23 programs
- Business administration programs53 programs
- Criminal justice programs20 programs
- Teacher assistant certification2 programs
- Auto body repair classes14 programs
- Solar and wind technician training30 programs
- Water treatment operator training4 programs
- OSHA safety training2 programs
- Insurance license courses1 program
- Construction training programs16 programs
- Dental hygiene programs4 programs
- Accounting and bookkeeping classes7 programs
- RN programs17 programs
- Project management certification19 programs
Where the Colorado machinist program numbers come from
The 19 machinist programs here are the ones Colorado approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 5 schools run them, and 11 of them report how past students did. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
How reliable are the Colorado figures?
The US Department of Labor's own results site lists Colorado among the states with "known data quality concerns".13 The figures here are shown as the state reported them; check them with the school before you enroll.
Sources for the facts about CNC machinist training in Colorado
Show the 13 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Computer Numerically Controlled Tool Operators
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List
- US Department of Labor, TrainingProviderResults.gov: search page, note on states with known data quality concerns