Retraining ReportJob training public funding can pay for

Find training

CNC machinist training in Maine

8 CNC machinist programs with costs, results and funding that can make them free

CNC machinist training costs less in Maine than across the US: the typical program is $903, 81% below the national $4,845, the lowest of the 34 states with enough programs to compare. But graduates of the typical program earned about $31,500 a year (estimated), 23% less than across the US, the 2nd-lowest of the 16 states with enough programs to compare. Also, in Maine, 79% of students finished the typical program, against 71% across the US. The rest is close to the national figures: 80% were working six months later.

The 8 programs are run by 5 schools; the largest runs 3.

In Maine, 4 of the 8 programs take students without a high school diploma and 4 ask for a diploma or equivalent.

By kind, the 8 programs here are machinist certificate or diploma (5 programs), short course or single class (2 programs) and CNC or machine operator (1 program).

They run in 5 cities across Maine; Rockland has the most with 3, then South Portland (2).

What a CNC machinist does and how you become one: CNC machinist training across the US

See the 8 programs

How much does CNC machinist training cost in Maine?

$291 to $2,546 is what most CNC machinist programs in Maine cost if you pay yourself

That is the middle half of the 6 programs with a price. All of them: $285 to $10,342

Across the US, most cost $2,301 to $7,400.

In the typical program

Finished the program
79%
US: 71%
Working 6 months later
80%
US: 80%
Earned a year, estimated
about $31,500
US: about $40,700
Length
Not enough data
3 programs report it; a typical figure needs 5

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Maine. How these figures are made

What CNC tool operators earn in Maine

$59,660 typical pay a year in May 2025; most earn $50,840 to $61,250

Across the US: $50,690 a year.

Jobs now
about 440
Change to 2034
−17% US: −11%
Openings a year
about 50

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Maine labor market office, openings counting people who leave or change jobs2.

Is there free CNC machinist training in Maine?

All 8 CNC machinist programs in Maine approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

8 programs

  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Precision Machining Technology

    Central Maine Community College

    Auburn

    Accredited school

    High school diploma or equivalent

    Central Maine Community College, AuburnMachinist certificate or diploma · Accredited schoolIn person · High school diploma or equivalent

    Earned a year, estimated$46,500
    Price if you pay yourselfLeft out
    Program website, Precision Machining Technology at Central Maine Community College
    More details about Precision Machining Technology at Central Maine Community College
    Finished
    64%
    Working at 6 months
    80%
    Earned in a quarter
    $11,621
    Length
    Not reported
    Cost of supplies
    Not reported
    Students counted
    29
    Earned a year, estimated
    $46,500
    Price if you pay yourself
    Left out
    Program website, Precision Machining Technology at Central Maine Community College
  • Short course or single classIn personNo diploma needed

    Machining Part I

    Mid-Coast School of Technology

    Rockland

    No diploma needed

    Mid-Coast School of Technology, RocklandShort course or single classIn person · No diploma needed

    Earned a year, estimated$48,500
    Price if you pay yourself$285
    Program website, Machining Part I at Mid-Coast School of Technology
    More details about Machining Part I at Mid-Coast School of Technology
    Finished
    96%
    Working at 6 months
    64%
    Earned in a quarter
    $12,136
    Length
    8 weeks, 24 hours a week
    Cost of supplies
    None listed
    Students counted
    28
    Earned a year, estimated
    $48,500
    Price if you pay yourself
    $285
    Program website, Machining Part I at Mid-Coast School of Technology
  • Machinist certificate or diplomaIn personHigh school diploma or equivalent

    Precision Machining Technology

    Kennebec Valley Community College

    Fairfield

    Accredited school

    High school diploma or equivalent

    Kennebec Valley Community College, FairfieldMachinist certificate or diploma · Accredited schoolIn person · High school diploma or equivalent

    Earned a year, estimated$31,500
    Price if you pay yourself$10,342
    School website, Precision Machining Technology at Kennebec Valley Community College
    More details about Precision Machining Technology at Kennebec Valley Community College
    Finished
    76%
    Working at 6 months
    80%
    Earned in a quarter
    $7,867
    Length
    Not reported
    Cost of supplies
    $2,256
    Students counted
    26
    Earned a year, estimated
    $31,500
    Price if you pay yourself
    $10,342
    School website, Precision Machining Technology at Kennebec Valley Community College
  • Machinist certificate or diplomaHybridHigh school diploma or equivalent

    Precision Machining & Manufacturing

    Southern Maine Community College

    South Portland

    Accredited school

    High school diploma or equivalent

    Southern Maine Community College, South PortlandMachinist certificate or diploma · Accredited schoolHybrid · High school diploma or equivalent

    Earned a year, estimated$23,600
    Price if you pay yourself$2,896
    Program website, Precision Machining & Manufacturing at Southern Maine Community College
    More details about Precision Machining & Manufacturing at Southern Maine Community College
    Finished
    79%
    Working at 6 months
    50%
    Earned in a quarter
    $5,888
    Length
    Not reported
    Cost of supplies
    $2,800
    Students counted
    24
    Earned a year, estimated
    $23,600
    Price if you pay yourself
    $2,896
    Program website, Precision Machining & Manufacturing at Southern Maine Community College
  • Short course or single classIn personNo diploma needed

    Machining Part II

    Mid-Coast School of Technology

    Rockland

    No diploma needed

    Mid-Coast School of Technology, RocklandShort course or single classIn person · No diploma needed

    Earned a year, estimated$28,100
    Price if you pay yourself$285
    Program website, Machining Part II at Mid-Coast School of Technology
    More details about Machining Part II at Mid-Coast School of Technology
    Finished
    100%
    Working at 6 months
    100%
    Earned in a quarter
    $7,025
    Length
    8 weeks, 24 hours a week
    Cost of supplies
    None listed
    Students counted
    13
    Earned a year, estimated
    $28,100
    Price if you pay yourself
    $285
    Program website, Machining Part II at Mid-Coast School of Technology
  • Machinist certificate or diplomaIn personNo diploma needed

    Machining CNC

    Mid-Coast School of Technology

    Rockland

    No diploma needed

    Mid-Coast School of Technology, RocklandMachinist certificate or diplomaIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$310
    Program website, Machining CNC at Mid-Coast School of Technology
    More details about Machining CNC at Mid-Coast School of Technology
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    7 weeks, 21 hours a week
    Cost of supplies
    None listed
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $310
    Program website, Machining CNC at Mid-Coast School of Technology
  • CNC or machine operatorHybridHigh school diploma or equivalent

    CNC Machine Operator

    Southern Maine Community College

    South Portland

    Accredited school

    High school diploma or equivalent

    Southern Maine Community College, South PortlandCNC or machine operator · Accredited schoolHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$1,496
    Program website, CNC Machine Operator at Southern Maine Community College
    More details about CNC Machine Operator at Southern Maine Community College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    $1,400
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $1,496
    Program website, CNC Machine Operator at Southern Maine Community College
  • Machinist certificate or diplomaHybridNo diploma needed

    Precision Machining Technology

    York County Community College

    Wells

    Accredited school

    No diploma needed

    York County Community College, WellsMachinist certificate or diploma · Accredited schoolHybrid · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourselfNot reported
    More details about Precision Machining Technology at York County Community College
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    Not reported
    Cost of supplies
    Not reported
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    Not reported

How to pay for CNC machinist training in Maine

WIOA funding can pay for CNC machinist training in Maine

All 8 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Paid machinist apprenticeships

An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. None of the programs on this page is one.7

Financial aid and grants for CNC machinist training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 5 of the 8 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. The school can tell you whether its program qualifies.89

GI Bill for CNC machinist training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 8 programs the VA approves, so ask the school or the VA.10

Quick facts: CNC machinist training in Maine

programs with a price cost under $1,000
3 of 6
lowest typical price among the states with enough programs to compare
1st of 34
other states where the typical program's graduates earned less
1 of 15
CNC machinist programs here, against the typical state's 12
8 vs 12

The same figures as the CNC machinist training by state table; prices only for states with three or more schools.

Machinist apprenticeships in Maine

A machinist apprenticeship is usually run by an employer. It combines paid training on the job with related classes and lasts several years.11

You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. None of the CNC machinist programs on this page is an apprenticeship.

CNC machinist training in Portland, Lewiston and other Maine cities

Choosing an area filters the program list above. 4 in smaller cities and towns.

Other training in Maine

How CNC machinist training compares with the rest of skilled trades: Trade school programs in Maine

Where the Maine machinist program numbers come from

The 8 machinist programs here are the ones Maine approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 5 schools run them, and 5 of them report how past students did, and one price failed our checks and is left out. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about CNC machinist training in Maine

Show the 12 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-9161 Computer Numerically Controlled Tool Operators
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Computer Numerically Controlled Tool Operators
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
  8. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  9. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  10. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  11. US Bureau of Labor Statistics, Occupational Outlook Handbook: Machinists and Tool and Die Makers
  12. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List