Retraining ReportJob training public funding can pay for

Find training

Welding classes in Iowa

50 welding programs with costs, results and funding that can make them free

In Iowa, 55% of students finished the typical program, against 75% across the US. And programs here run shorter: typically 12 weeks, against 26 weeks nationally. But in Iowa, 79% were working six months after leaving, against 71% across the US. The rest is close to the national figures: graduates earned about $34,000 a year.

The 50 programs are run by 17 schools; the largest runs 12.

More programs here take students without a high school diploma: 28 of 50, against 44% across the US.

By kind, the 50 programs here are general welding (25 programs), structural welding (7 programs), pipe welding (7 programs), single welding process (5 programs), and 6 more of 2 other kinds. The cheapest kind here is structural welding, at $1,500 for the middle one of 7 with a price; the most expensive is welding (associate degree), at $13,396.

Fewer of them can be taken online or hybrid than across the US: 2 of 50, against 19% nationwide. They run in 16 cities across Iowa; Sioux City has the most with 16, then West Burlington (6) and Cedar Rapids (5).

What a welder does and how you become one: Welding classes across the US

See the 50 programs

How much do welding classes cost in Iowa?

Certificates and short courses (45 programs)
$1,500 to $5,597most of them, usually 6 to 16 weeks long
Two-year degrees (5 programs)
$13,195 to $15,960most of them

What you pay yourself for the whole program, as the schools report it. "Most" is the middle half of the programs with a price.

In the typical program

Finished the program
55%
US: 75%
Working 6 months later
79%
US: 71%
Earned a year, estimated
about $34,000
US: about $33,900
Length
8 to 30 weeks
US: 26 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Iowa. How these figures are made

What welders, cutters, solderers and brazers earn in Iowa

$55,090 typical pay a year in May 2025; most earn $48,250 to $60,200

Across the US: $53,750 a year.

Jobs now
about 9,270
Change to 2034
+8% US: +2%
Openings a year
about 980

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Iowa labor market office, openings counting people who leave or change jobs2.

Are there free welding classes in Iowa?

All 50 welding programs in Iowa approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

50 programs

How to pay for welding classes in Iowa

WIOA funding can pay for welding classes in Iowa

All 50 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for welding classes

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 38 of the 50 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. Check with the school before you count on it.78

GI Bill for welding classes

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 50 programs the VA approves, so ask the school or the VA.9

Quick facts: Welding classes in Iowa

programs with a price cost under $2,000
16 of 50
lowest typical price among the states with enough programs to compare
7th of 46
other states where the typical program's graduates earned less
13 of 31
welding programs here, against the typical state's 24
50 vs 24

The same figures as the welding classes by state table; prices only for states with three or more schools.

Do pricier welding programs in Iowa have better results?

A little. The pricier half of welding programs in Iowa typically costs $7,434, about 3 times as much as the cheaper half's $2,436; the share finishing came out higher, the rest about level. In the pricier half, 65% finished, against 50%; graduates earned about $33,700 a year, against about $35,500; 78% were working six months later, against 77%.

The pricier programs also run longer, typically 30 weeks against 9, so part of the price pays for more teaching.

Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.

How this is worked out: the 18 certificates and short courses here that report both a price and results, split at the middle price into two halves of 9; degrees are left out. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.

Welding classes in Sioux City, Burlington, Cedar Rapids and other Iowa cities

Areas with 10 or more programs have a page of their own. Choosing another area filters the program list above. 9 more programs are in 6 other areas, 6 in smaller cities and towns.

Other training in Iowa

How welding classes compare with the rest of skilled trades: Trade school programs in Iowa

Where the Iowa welding program numbers come from

The 50 welding programs here are the ones Iowa approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 17 schools run them, and 22 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about welding classes in Iowa

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 51-4121 Welders, Cutters, Solderers, and Brazers
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Welders, Cutters, Solderers, and Brazers
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List