Plumbing school in New Hampshire
10 plumbing programs with costs, results and funding that can make them free
Plumbing school costs less in New Hampshire than across the US: the typical program is $1,500, 54% below the national $3,250, the 6th-lowest of the 21 states with enough programs to compare. And programs here run shorter: typically 12 weeks, against 32 weeks nationally. Also, in New Hampshire, 92% of students finished the typical program, against 77% across the US.
New Hampshire has approved all 10 for workforce funding. One school runs 7 of these 10 programs, so the typical figures lean heavily on its prices and results.
More programs here take students without a high school diploma: 6 of 10, against 42% across the US.
By kind, the 10 programs here are short course or single level (6 programs) and plumbing apprenticeship (4 programs). The cheapest kind here is plumbing apprenticeship, at $1,500 for the middle one of 4 with a price; the most expensive is short course or single level, at $2,200.
Fewer of them can be taken online or hybrid than across the US: 1 of 10, against 30% nationwide. Manchester alone has 9 of the 10; the rest are spread over 1 other city. Only 2 are at schools on the Department of Education's accreditation list, which WIOA doesn't require.
What a plumber does and how you become one: Plumbing school across the US
See the 10 programsHow much does plumbing school cost in New Hampshire?
$1,500 to $1,750 is what most plumbing programs in New Hampshire cost if you pay yourself
That is the middle half of the 8 programs with a price. All of them: $1,300 to $2,200
Across the US, most cost $1,770 to $6,028.
In the typical program
- Finished the program
- 92%
- US: 77%
- Working 6 months later
- Left out
- New Hampshire's rates sit far below every other state's
- Earned a year, estimated
- about $35,100
- Length
- 5 to 19 weeks
- US: 32 weeks
US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in New Hampshire. How these figures are made
What plumbers, pipefitters and steamfitters earn in New Hampshire
$66,810 typical pay a year in May 2025; most earn $52,610 to $77,080
Across the US: $63,800 a year.
- Jobs now
- about 1,950
- Change to 2034
- +5% US: +5%
- Openings a year
- about 240
Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the New Hampshire labor market office, openings counting people who leave or change jobs2.
All 10 plumbing programs in New Hampshire approved for WIOA funding
Filters
10 programs
Fuel Gas Piping Installation Course
Advanced Trade School LLC
Brentwood
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,600Program website, Fuel Gas Piping Installation Course at Advanced Trade School LLCMore details about Fuel Gas Piping Installation Course at Advanced Trade School LLC
- Finished
- 99%
- Working at 6 months
- Left out
- Earned in a quarter
- Not reported
- Length
- 4 weeks, 15 hours a week
- Cost of supplies
- None listed
- Students counted
- 156
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,600
Plumbing year 1
The New Hampshire School of Mechanical Trades
Manchester
High school diploma or equivalent
Earned a year, estimated$33,000Price if you pay yourself$1,500Program website, Plumbing year 1 at The New Hampshire School of Mechanical TradesMore details about Plumbing year 1 at The New Hampshire School of Mechanical Trades
- Finished
- 89%
- Working at 6 months
- Left out
- Earned in a quarter
- $8,240
- Length
- 19 weeks, 8 hours a week
- Cost of supplies
- None listed
- Students counted
- 97
- Earned a year, estimated
- $33,000
- Price if you pay yourself
- $1,500
Plumbing 101
The New Hampshire School of Mechanical Trades
Manchester
No diploma needed
Earned a year, estimated$32,300Price if you pay yourself$2,200Program website, Plumbing 101 at The New Hampshire School of Mechanical TradesMore details about Plumbing 101 at The New Hampshire School of Mechanical Trades
- Finished
- 74%
- Working at 6 months
- Left out
- Earned in a quarter
- $8,063
- Length
- 15 weeks, 6 hours a week
- Cost of supplies
- $200
- Students counted
- 66
- Earned a year, estimated
- $32,300
- Price if you pay yourself
- $2,200
Plumbing Year 3
The New Hampshire School of Mechanical Trades
Manchester
Prerequisite courses
Earned a year, estimated$49,800Price if you pay yourself$1,500Program website, Plumbing Year 3 at The New Hampshire School of Mechanical TradesMore details about Plumbing Year 3 at The New Hampshire School of Mechanical Trades
- Finished
- 95%
- Working at 6 months
- Left out
- Earned in a quarter
- $12,439
- Length
- 19 weeks, 8 hours a week
- Cost of supplies
- None listed
- Students counted
- 60
- Earned a year, estimated
- $49,800
- Price if you pay yourself
- $1,500
Plumbing Year 4
The New Hampshire School of Mechanical Trades
Manchester
Prerequisite courses
Earned a year, estimated$37,300Price if you pay yourself$1,500Program website, Plumbing Year 4 at The New Hampshire School of Mechanical TradesMore details about Plumbing Year 4 at The New Hampshire School of Mechanical Trades
- Finished
- 86%
- Working at 6 months
- Left out
- Earned in a quarter
- $9,318
- Length
- 19 weeks, 8 hours a week
- Cost of supplies
- None listed
- Students counted
- 56
- Earned a year, estimated
- $37,300
- Price if you pay yourself
- $1,500
Plumbing 101 Day
The New Hampshire School of Mechanical Trades
Manchester
No diploma needed
Earned a year, estimated$10,700Price if you pay yourself$2,200Program website, Plumbing 101 Day at The New Hampshire School of Mechanical TradesMore details about Plumbing 101 Day at The New Hampshire School of Mechanical Trades
- Finished
- 92%
- Working at 6 months
- Left out
- Earned in a quarter
- $2,683
- Length
- 8 weeks, 12 hours a week
- Cost of supplies
- $200
- Students counted
- 53
- Earned a year, estimated
- $10,700
- Price if you pay yourself
- $2,200
Plumbing year 2
The New Hampshire School of Mechanical Trades
Manchester
Prerequisite courses
Earned a year, estimated$55,800Price if you pay yourself$1,500Program website, Plumbing year 2 at The New Hampshire School of Mechanical TradesMore details about Plumbing year 2 at The New Hampshire School of Mechanical Trades
- Finished
- 93%
- Working at 6 months
- Left out
- Earned in a quarter
- $13,957
- Length
- 19 weeks, 8 hours a week
- Cost of supplies
- None listed
- Students counted
- 45
- Earned a year, estimated
- $55,800
- Price if you pay yourself
- $1,500
Gas Piping Installer
The New Hampshire School of Mechanical Trades
Manchester
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourself$1,300Program website, Gas Piping Installer at The New Hampshire School of Mechanical TradesMore details about Gas Piping Installer at The New Hampshire School of Mechanical Trades
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 8 weeks, 8 hours a week
- Cost of supplies
- $300
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $1,300
2022 National Fuel Gas Code
Manchester Community College
Manchester
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourselfLeft outProgram website, 2022 National Fuel Gas Code at Manchester Community CollegeMore details about 2022 National Fuel Gas Code at Manchester Community College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 1 week, 3 hours a week
- Cost of supplies
- Not reported
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- Left out
2023 National Fuel Gas Code
Manchester Community College
Manchester
Accredited school
No diploma needed
Earned a year, estimatedNot reportedPrice if you pay yourselfLeft outProgram website, 2023 National Fuel Gas Code at Manchester Community CollegeMore details about 2023 National Fuel Gas Code at Manchester Community College
- Finished
- Not reported
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 1 week, 3 hours a week
- Cost of supplies
- Not reported
- Students counted
- Not reported
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- Left out
No programs match these filters.
How to pay for plumbing school in New Hampshire
WIOA funding can pay for plumbing school in New Hampshire
All 10 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Paid plumbing apprenticeships
An apprenticeship is a job: you're paid to learn, and you apply to the employer or the sponsor, not a school. 4 of the programs on this page are apprenticeships.7
Financial aid and grants for plumbing school
Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. 2 of the 10 programs here are at schools on the Department of Education's accreditation list; the rest may qualify too. The school can tell you whether its program qualifies.89
GI Bill for plumbing school
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 10 programs the VA approves, so ask the school or the VA.10
Quick facts: Plumbing school in New Hampshire
- programs with a price cost under $2,000
- 6 of 8
- lowest typical price among the states with enough programs to compare
- 6th of 21
- plumbing programs here, against the typical state's 5
- 10 vs 5
The same figures as the plumbing school by state table; prices only for states with three or more schools.
Plumbing apprenticeships in New Hampshire
Most plumbers train in a four- or five-year apprenticeship. Each year usually brings about 2,000 hours of paid work on the job plus classes in safety, local plumbing codes and blueprint reading. Unions, trade associations and businesses run the programs; some people start as helpers or with a pre-apprenticeship course. To work on your own, states and cities often ask for two to five years of experience and a passed exam.11
You apply to the employer or the program sponsor, not through a school.7 The Department of Labor's Apprenticeship Finder lists openings by place and job. This page lists 4 plumbing apprenticeships approved for WIOA funding in New Hampshire. Ask what you'll pay for the classes and what you'll earn on the job.
Plumbing school in Manchester, Boston and other New Hampshire cities
Choosing an area filters the program list above.
Other training in New Hampshire
How plumbing school compares with the rest of skilled trades: Trade school programs in New Hampshire
- CDL training17 programs
- CNA classes11 programs
- Medical assistant training14 programs
- Phlebotomy training9 programs
- Welding classes7 programs
- HVAC training15 programs
- Medical billing and coding training16 programs
- LPN programs4 programs
- EMT classes8 programs
- Electrician training11 programs
- Dental assistant programs17 programs
- Auto mechanic classes5 programs
- Pharmacy technician training10 programs
- CNC machinist training6 programs
- Carpentry classes5 programs
- Heavy equipment operator training1 program
- Cybersecurity training35 programs
- IT training72 programs
- EKG technician programs2 programs
- Massage therapy school4 programs
- Paralegal programs3 programs
- Fire academy4 programs
- Surgical tech programs3 programs
- Radiology tech programs1 program
- Home health aide training1 program
- Medical administrative assistant training11 programs
- Human resources training8 programs
- Early childhood education programs20 programs
- Supply chain and logistics training1 program
- Hospitality management programs4 programs
- Addiction counselor training3 programs
- Coding and software development courses51 programs
- Lineman school1 program
- Sterile processing technician training1 program
- Data analytics courses36 programs
- Administrative assistant training75 programs
- Respiratory therapy programs1 program
- Medical lab technician programs1 program
- AutoCAD and drafting courses4 programs
- Digital marketing courses12 programs
- Web and graphic design courses19 programs
- Health information technology programs7 programs
- Vet tech programs2 programs
- Patient care technician training3 programs
- Home inspector training4 programs
- Personal trainer certification2 programs
- Healthcare administration programs2 programs
- Customer service training2 programs
- Flight school1 program
- RBT certification training1 program
- Mental health technician training2 programs
- Human services programs3 programs
- Manufacturing technician training3 programs
- Electronics technician training1 program
- Business administration programs18 programs
- Teacher assistant certification6 programs
- OSHA safety training1 program
- Optician training1 program
- Construction training programs2 programs
- Accounting and bookkeeping classes34 programs
- RN programs4 programs
- Project management certification28 programs
Where the New Hampshire plumbing program numbers come from
The 10 plumbing programs here are the ones New Hampshire approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),12 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 3 schools run them, and 7 of them report how past students did, and 2 prices failed our checks and are left out. Schools that never applied for approval are missing.
Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.
How reliable are the New Hampshire figures?
We leave out the share working 6 months later for New Hampshire: its rates sit far below every other state's.
Sources for the facts about plumbing school in New Hampshire
Show the 12 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 47-2152 Plumbers, Pipefitters, and Steamfitters
- Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Plumbers, Pipefitters, and Steamfitters
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List