Retraining ReportJob training public funding can pay for

Find training

Industrial maintenance technician training in Iowa

23 industrial maintenance programs with costs, results and funding that can make them free

In Iowa, 56% of students finished the typical program, against 67% across the US. The rest sits close to the national figures: graduates earned about $47,600 a year and 84% were working six months later.

The 23 programs are run by 12 schools; the largest runs 5.

Fewer programs here take students without a high school diploma: 4 of 23, against 38% across the US.

By kind, the 23 programs here are industrial maintenance (associate degree, 13 programs), industrial maintenance certificate or diploma (6 programs), mechatronics and automation (3 programs) and short course or single skill (1 program). The cheapest kind here is industrial maintenance certificate or diploma, at $6,435 for the middle one of 6 with a price; the most expensive is industrial maintenance (associate degree), at $14,289.

Fewer of them can be taken online or hybrid than across the US: 4 of 23, against 29% nationwide. They run in 12 cities across Iowa; West Burlington has the most with 5, then Sioux City (3) and Fort Dodge (3). All 23 are at schools on the Department of Education's list of accredited institutions.

What an industrial maintenance technician does and how you become one: Industrial maintenance technician training across the US

See the 23 programs

How much does industrial maintenance training cost in Iowa?

Two-year degrees (13 programs)
$12,990 to $15,540most of them, usually 64 to 80 weeks long
Other industrial maintenance programs (10 programs)
$3,345 to $7,229most of them, usually 16 to 32 weeks long

What you pay yourself for the whole program, as the schools report it. "Most" is the middle half of the programs with a price.

In the typical program

Finished the program
56%
US: 67%
Working 6 months later
84%
US: 81%
Earned a year, estimated
about $47,600
US: about $50,400
Length
31 to 80 weeks
US: 52 weeks

US Department of Labor data, program year 2024; only programs approved for workforce funding, so not every school in Iowa. How these figures are made

What industrial machinery mechanics earn in Iowa

$64,400 typical pay a year in May 2025; most earn $57,550 to $76,040

Across the US: $64,520 a year.

Jobs now
about 6,050
Change to 2034
+22% US: +16%
Openings a year
about 690

Pay of everyone working in the job, not only graduates of these programs. Pay and jobs: Bureau of Labor Statistics1; change and openings, 2024 to 2034, from the Iowa labor market office, openings counting people who leave or change jobs2.

Is there free industrial maintenance training in Iowa?

All 23 industrial maintenance programs in Iowa approved for WIOA funding

Filters
What you need to enroll
Kind of program
School
How it's taught
How to show the list

23 programs

How to pay for industrial maintenance training in Iowa

WIOA funding can pay for industrial maintenance training in Iowa

All 23 programs on this page are approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for industrial maintenance training

Most students can get federal student aid for college, career school or trade school, and a Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. All 23 programs here are at schools on the Department of Education's accreditation list. Check with the school before you count on it.78

GI Bill for industrial maintenance training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs. The list doesn't record which of these 23 programs the VA approves, so ask the school or the VA.9

Quick facts: Industrial maintenance technician training in Iowa

programs with a price cost under $10,000
10 of 23
lowest typical price among the states with enough programs to compare
28th of 29
other states where the typical program's graduates earned less
9 of 15
industrial maintenance programs here, against the typical state's 9
23 vs 9

The same figures as the industrial maintenance training by state table; prices only for states with three or more schools.

Do pricier industrial maintenance programs in Iowa have better results?

Here, yes. The pricier half of industrial maintenance programs in Iowa typically costs $15,614, $2,780 more than the cheaper half's $12,834, and it did better on every figure the schools report. In the pricier half, 58% finished, against 43%; graduates earned about $50,900 a year, against about $47,600; 88% were working six months later, against 84%.

Two groups side by side can't tell you what one school will do for you, and programs differ in who enrolls. To weigh single programs, sort the list by price or by earnings.

How this is worked out: the 10 two-year degrees here that report both a price and results, split at the middle price into two halves of 5; programs at other levels are left out. A typical figure needs five programs in a half. Source: US Department of Labor, program year 2024; earnings are the second quarter after leaving, times four.

Industrial maintenance technician training in Burlington, Sioux City, Fort Dodge and other Iowa cities

Choosing an area filters the program list above. 4 more programs are in 4 other areas, 3 in smaller cities and towns.

Other training in Iowa

How industrial maintenance training compares with the rest of skilled trades: Trade school programs in Iowa

Where the Iowa industrial maintenance program numbers come from

The 23 industrial maintenance programs here are the ones Iowa approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act) as of June 30, 2025, from its eligible training provider list (ETPL),10 as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). 12 schools run them, and 15 of them report how past students did. Schools that never applied for approval are missing.

Prices are tuition and required fees for someone paying without workforce funding, as each school reported them; results describe past students, so they are no guarantee. Where the numbers come from explains every figure, and what "Not reported", "Left out" and "Not enough data" mean.

Sources for the facts about industrial maintenance training in Iowa

Show the 10 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, all data file: 49-9041 Industrial Machinery Mechanics
  2. Projections Central, long-term occupational projections 2024 to 2034 (US Bureau of Labor Statistics and state labor market information offices): Industrial Machinery Mechanics
  3. US Department of Labor, TrainingProviderResults.gov: About This Site
  4. US Department of Labor: WIOA Adult Program
  5. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  6. US Department of Labor: American Job Centers
  7. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  8. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  9. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  10. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List