Electrician training in Alabama
8 electrician training programs with costs, results and funding that can make them free
7 schools offer these electrician programs, and Alabama has approved every one for workforce funding. Each shows its price if you pay yourself and how past students did.
Electricians install, maintain and repair electrical power, communications, lighting and control systems. Most learn the trade in a four- or five-year apprenticeship with paid on-the-job training, and most states require electricians to pass a test and be licensed.1
In Alabama, 7 of the 8 programs ask for a high school diploma or equivalent and 1 asks for earlier courses first.
By kind, the 8 programs here are electrician certificate or diploma (4 programs), electrician (associate degree, 3 programs) and industrial electrician (1 program).
See the 8 programsHow much does electrician training cost in Alabama?
$9,272 to $11,940 is what most electrician training programs in Alabama cost if you pay yourself
That is the middle half of the 8 programs with a price. All of them: $3,899 to $12,464
In the typical program
- Finished the program
- 62%
- Working 6 months later
- Left out
- Alabama's rates sit far below every other state's
- Earned a year, estimated
- about $27,900
- Length
- Not enough data
- 3 programs report it; a typical figure needs 5
Source: US Department of Labor, program year 2024 (July 2024 to June 2025). Only programs approved for workforce funding are listed; other schools in Alabama may also offer electrician training. How these figures are made
All 8 electrician training programs in Alabama approved for WIOA funding
Filters
8 programs
Electrical Systems Technology - AAS
Bevill State Community College
Sumiton
Accredited school
High school diploma or equivalent
Earned a year, estimated$46,500Price if you pay yourself$12,06212 students trained with WIOA funding
Program website, Electrical Systems Technology - AAS at Bevill State Community CollegeMore details about Electrical Systems Technology - AAS at Bevill State Community College
- Finished
- 92%
- Working at 6 months
- Left out
- Earned in a quarter
- $11,624
- Length
- Not reported
- Cost of supplies
- $5,311
- Students counted
- 157
- Earned a year, estimated
- $46,500
- Price if you pay yourself
- $12,062
- students trained with WIOA funding
- 12
Electrical Technology Degree
Gadsden State Community College
Gadsden
Accredited school
High school diploma or equivalent
Earned a year, estimated$32,900Price if you pay yourself$12,46412 students trained with WIOA funding
Program website, Electrical Technology Degree at Gadsden State Community CollegeMore details about Electrical Technology Degree at Gadsden State Community College
- Finished
- 41%
- Working at 6 months
- Left out
- Earned in a quarter
- $8,236
- Length
- Not reported
- Cost of supplies
- $6,864
- Students counted
- 143
- Earned a year, estimated
- $32,900
- Price if you pay yourself
- $12,464
- students trained with WIOA funding
- 12
Electrical Technology AAS
George C. Wallace Community College
Dothan
Accredited school
High school diploma or equivalent
Earned a year, estimated$15,600Price if you pay yourself$11,8993 students trained with WIOA funding
Program website, Electrical Technology AAS at George C. Wallace Community CollegeMore details about Electrical Technology AAS at George C. Wallace Community College
- Finished
- 38%
- Working at 6 months
- Left out
- Earned in a quarter
- $3,900
- Length
- 75 weeks, 22 hours a week
- Cost of supplies
- $2,689
- Students counted
- 126
- Earned a year, estimated
- $15,600
- Price if you pay yourself
- $11,899
- students trained with WIOA funding
- 3
Electrical Technology Short Certificate Program
Lawson State Community College
Birmingham
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$6,450Program website, Electrical Technology Short Certificate Program at Lawson State Community CollegeMore details about Electrical Technology Short Certificate Program at Lawson State Community College
- Finished
- 62%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- 52 weeks, 28 hours a week
- Cost of supplies
- $3,400
- Students counted
- 50
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $6,450
Electrical Technology
Wallace Community College
Selma
Accredited school
High school diploma or equivalent
Earned a year, estimated$20,800Price if you pay yourself$10,2125 students trained with WIOA funding
School website, Electrical Technology at Wallace Community CollegeMore details about Electrical Technology at Wallace Community College
- Finished
- 58%
- Working at 6 months
- Left out
- Earned in a quarter
- $5,192
- Length
- Not reported
- Cost of supplies
- $2,700
- Students counted
- 48
- Earned a year, estimated
- $20,800
- Price if you pay yourself
- $10,212
- students trained with WIOA funding
- 5
Electrical Technology (STC)
George C. Wallace Community College
Dothan
Accredited school
High school diploma or equivalent
Earned a year, estimatedNot reportedPrice if you pay yourself$3,899Program website, Electrical Technology (STC) at George C. Wallace Community CollegeMore details about Electrical Technology (STC) at George C. Wallace Community College
- Finished
- 73%
- Working at 6 months
- Not reported
- Earned in a quarter
- Not reported
- Length
- Not reported
- Cost of supplies
- $1,989
- Students counted
- 30
- Earned a year, estimated
- Not reported
- Price if you pay yourself
- $3,899
Electrical Technology
Shelton State Community College
Tuscaloosa
Accredited school
Prerequisite courses
Earned a year, estimated$22,800Price if you pay yourself$11,4004 students trained with WIOA funding
Program website, Electrical Technology at Shelton State Community CollegeMore details about Electrical Technology at Shelton State Community College
- Finished
- 62%
- Working at 6 months
- Left out
- Earned in a quarter
- $5,690
- Length
- 86 weeks, 17 hours a week
- Cost of supplies
- $1,833
- Students counted
- 29
- Earned a year, estimated
- $22,800
- Price if you pay yourself
- $11,400
- students trained with WIOA funding
- 4
Industrial Electricity
Southern Union Community College
Opelika
Accredited school
High school diploma or equivalent
Earned a year, estimated$34,700Price if you pay yourself$11,850Program website, Industrial Electricity at Southern Union Community CollegeMore details about Industrial Electricity at Southern Union Community College
- Finished
- 70%
- Working at 6 months
- Left out
- Earned in a quarter
- $8,676
- Length
- Not reported
- Cost of supplies
- $1,607
- Students counted
- 26
- Earned a year, estimated
- $34,700
- Price if you pay yourself
- $11,850
No programs match these filters.
How to pay for electrician training in Alabama
WIOA funding can pay for electrician training in Alabama
Every program on this page is approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?
Paid electrician apprenticeships
An apprenticeship is a job: you're paid to learn, with a raise as your skills grow, and most include classroom teaching. You apply to the employer or the program sponsor. Ask what you'll pay for the classroom part and what you'll earn on the job.6
Financial aid and grants for electrician training
Most students can get federal student aid for college, career school or trade school. A Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. Ask the school whether its program qualifies.78
GI Bill for electrician training
Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs.9
The program list does not show which programs accept these. Ask the school.
Quick facts: Electrician training in Alabama
- lowest typical price among the states with enough programs to compare
- 30th of 34
- other states where the typical program's graduates earned less
- 1 of 21
- electrician training programs here, against the typical state's 12
- 8 vs 12
State comparisons use the same figures as the electrician training by state table: the middle program of each state, and only states with three or more schools for prices. Source: US Department of Labor, program year 2024 (July 2024 to June 2025).
Electrician apprenticeships in Alabama
Most electricians train in a four- or five-year apprenticeship. Each year usually brings about 2,000 hours of paid work on the job plus classes in electrical theory, blueprint reading, math, the electrical code and safety. Unions and contractor associations run most programs, and experience from the military or construction can shorten one. When you finish, you are a journey worker and can work on your own, subject to your state license.1
You apply to the employer or the program sponsor, not through a school.6 The Department of Labor's Apprenticeship Finder lists openings by place and job. None of the electrician training programs on this page is an apprenticeship.
Electrician training in Birmingham, Dothan, Gadsden and other Alabama cities
Choosing an area filters the program list above.
Other training in Alabama
How electrician training compares with the rest of skilled trades: Trade school programs in Alabama
- CDL training29 programs
- CNA classes28 programs
- Medical assistant training30 programs
- Phlebotomy training3 programs
- Welding classes37 programs
- HVAC training14 programs
- Medical billing and coding training13 programs
- LPN programs19 programs
- EMT classes16 programs
- Dental assistant programs12 programs
- Auto mechanic classes6 programs
- Pharmacy technician training9 programs
- Plumbing school1 program
- CNC machinist training6 programs
- Carpentry classes2 programs
- Heavy equipment operator training1 program
- Diesel mechanic training6 programs
- Cybersecurity training4 programs
- IT training16 programs
- Surgical tech programs3 programs
- Radiology tech programs8 programs
- Culinary school2 programs
- PTA programs5 programs
- Medical administrative assistant training13 programs
- Medication aide training10 programs
- Industrial maintenance technician training16 programs
- Aircraft mechanic school6 programs
- Supply chain and logistics training4 programs
- Coding and software development courses1 program
- Lineman school8 programs
- Sterile processing technician training1 program
- Sonography school6 programs
- Data analytics courses1 program
- Respiratory therapy programs5 programs
- Medical lab technician programs4 programs
- AutoCAD and drafting courses3 programs
- Health information technology programs6 programs
- Patient care technician training7 programs
- Manufacturing technician training7 programs
- Electronics technician training6 programs
- Auto body repair classes1 program
- Water treatment operator training2 programs
- OSHA safety training1 program
- Dialysis technician training1 program
- Optician training2 programs
- Construction training programs3 programs
- Dental hygiene programs1 program
- RN programs23 programs
Where the Alabama electrician program numbers come from
Which Alabama electrician programs are on this list?
These are the electrician programs Alabama approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act), as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). Each state keeps its approved programs on an eligible training provider list (ETPL).10 The list here covers programs approved as of June 30, 2025. Schools that never applied for approval are missing, so this is a part of what Alabama offers.
How the prices and results of Alabama electrician programs are measured
Prices are tuition and required fees for someone paying without workforce funding, as the school reported them; check the current price with the school. Results describe students who left each program in recent years, so they are no guarantee, and the yearly earnings are the reported quarter times four, an estimate. A program without a "Trained with WIOA funding" line may still take WIOA students. Where a field was left empty or withheld, the page says "Not reported", and "Left out" where a figure was filed but failed one of our checks; nothing is estimated to fill a gap. Where the numbers come from explains each figure in full.
How reliable are the Alabama figures?
The US Department of Labor's own results site lists Alabama among the states with "known data quality concerns".11 We leave out the share working 6 months later for Alabama: its rates sit far below every other state's.
Sources for the facts about electrician training in Alabama
Show the 11 sourcesHide the sources
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Electricians
- US Department of Labor, TrainingProviderResults.gov: About This Site
- US Department of Labor: WIOA Adult Program
- Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
- US Department of Labor: American Job Centers
- US Department of Labor, Apprenticeship.gov: Discover Apprenticeship: Earn While You Learn Today (fact sheet)
- US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
- US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
- US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
- US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List
- US Department of Labor, TrainingProviderResults.gov: search page, note on states with known data quality concerns